Spritzgiessmaschine

KraussMaffei KM 160/380 CX

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. Csdpjud N Hdjfx Anwogt We look forward to your inquiry.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight: Cedpfx Anjug Ty Hswegt

Condition: good (used), functionality: fully functional, power: 63.03 kW (85.70 HP), fuel type: diesel, color: yellow, overall weight: 16,000 kg, number of seats: 1, suspension: hydraulics, Year of construction: 2008, operating hours: 6,193 h, machine/vehicle number: YH04-03485, Equipment: cabin, quick-change device, standard shovel, steel tracks, This pre-owned New Holland is ready for immediate deployment on heavy-duty jobs. Currently showing 6,193 operating hours. Equipped with hydraulic quick coupler. Does not feature piping for sorting grab or hydraulic breaker. Transport length: 7.47 meters Transport width: 2.49 meters Cgedpfx Aox S Hblenwot Transport height: 2.81 meters

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. Codpfx Asx D Ux Tonwegt The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives Cgodpfx Ashuthyonwet immediately ready for use

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. Csdpfx Anjm Twnlswegt For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm Cedow U T Szjpfx Anwogt SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm Cgjdep Audqepfx Anwet WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display Cjdpfx Aex Aphtsnwogt • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen – 8-way water manifold – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32)

Condition: new, functionality: fully functional, Year of construction: 2026, total length: 3,000 mm, total height: 2,000 mm, warranty duration: 12 months, I offer a robotic 3D printer with an extruder from the manufacturer Cead and CNC control Siemens Sinumerik One - a solution for large-format printing of molds, design elements, boats, molds for lamination and much more. The machine is made in the Czech Republic and is offered including integration at the customer's site and training. Main features: Codpfx Answgkqtjwegt Printing system: Extruder CEAD E25 (up to 12kg/h) or S25 (up to 24kg/h) - selection according to customer requirements Robotic arm: COMAU N-170 with a reach of 3 meters and a load capacity of 160 kg Control system: Siemens SINUMERIK ONE - full CNC control, the possibility of debugging the technology using override. Software Compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: New machine Optional accessories: Heated print bed to optimize adhesion and print quality Note: Software and print bed are not included in the standard offer, they can be supplied as optional accessories. The price listed is with the basic Cead E25 extruder