Filtration units

LANNER Vetamat DS32

Condition: new, pressure 8,5 kN stroke 40 mm Fedpfefv Awajx Apwsgf throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Fgjdpetmugcsfx Apwof Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: used, Year of construction: 1987, Technical details: Fodpfemf Aw Aex Apwjgf number of spindles: 8

Condition: used, Year of construction: 2013, Chip conveyor Manufacturer: BMF - BÜRENER, with filter system and high-pressure pump. Fgjdpsiicnksfx Apwof Dimensions of chip conveyor: Inlet width: 600 mm, inlet height: 200 mm, conveying length: 3000 mm.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P Fedpfx Ajv Raatspwogf

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, PERO used parts washing machine Fgodpfjyb St Rex Apwof

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 Fgedpfx Aew T S Tbopwjf TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating Fgsdpsv Tm Ayjfx Apwef + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Fedpfog S Tx Iex Apwsgf

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series Fgodpfxefv Av So Apwsf • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings