Eccentric Press - Single Column

MÜLLER EXP 35

Condition: good (used), Eccentric press Inventory no. 3923 Manufacturer: Muller Type: EXP 35 Pressing force: 35 tons * Stroke adjustment: 10 to 70 mm * Adjustable ram stroke: 60 mm * Installation height: 300 mm * Overhang: 220 mm * Table surface: 0 x 00 mm * Stroke rate: 110 min. * Foot pedal operation * Adjustable table Ijdpjz Rq Ntjfx Ap Dobc * Machine weight: approx. 1500 kg.

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm Iodpfx Aotycdksp Dobc no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control Ibodpfx Aeykb Dqsp Djc - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: used, Year of construction: 1987, pressure 35 t throat 220 mm stroke 8-96 mm no. of strokes 120 Hub/min Ijdpfx Ajw E Nuuop Dobc ram - range of adjustment 50 mm table surface area 580x440 mm ram surface 305x170 mm hole in the table 215x175 mm table height 870 mm tool hole in ram Ø 40 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Machine type: horizontal band saw Cut: miter cut Ijdsyxcu Ujpfx Ap Dobc Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Ibedpfspdr Aiox Ap Doc Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P Iedpfx Ael Skl Iep Dsbc EU shipping approx. €350

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Ibjdpek S Htxofx Ap Dsc Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, pressure 40 t throat 225 mm Ijdpfxjb U Hwmj Ap Dobc stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Ibedpfx Asda Ha Nsp Dsc Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses