Shredder Shafts

Hammel 750- Arjes Lindner Olnova

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Kedpfx Asyuvr Rsk Ajna

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Kjdpfxsrt Uvze Ak Aena Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Knedpfxjq E Ti Hs Ak Aja

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Knodpfx Akoilg U Es Aja 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Knsdpfow Am Nqex Ak Aea Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor Kjdpfx Akorgzv Nj Ajna * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Kedpjk S Dw Ejfx Ak Ajna Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2019, operating hours: 9,563 h, LIEBHERR LH22M. Year: 2019. Hours: 9,563. Hydraulic cab. Four outriggers. Solid tyres. 5-meter industrial boom. 4-meter industrial stick with hydraulic line for attachments. Fitted with stone grapple. CE certified. Excellent condition. Ksdpfx Akeyh N Tfs Aona

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Kodsqmi Irepfx Ak Aena Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC Ksdpfeuhauyjx Ak Aona - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6