Slot boring machine

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Ledpfx Agotg Ailozohr Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Lhsdpeqt Dmysfx Agzjr - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F Edge Banding Machine with pre-milling, corner copying, and two profile scrapers. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for user-friendly operation; up to 12 operating programs can be saved. Edge thickness (coil): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support, special feature extendable up to 950 mm Extraction ports: 80 + 140 mm Units/Equipment: - Quick-change glue pot with glue outlet; two glue pots included (one was used for EVA glue, one for PUR glue). The PUR glue pot is virtually as new, purchased for a single order only. - Manual overhead pressure adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Pre-milling unit with Leitz Whispercut diamond cutters, still sharp - Gluing section with automatic edge feed for coil material up to 3 mm Ledpfetpn Etex Agzshr - Pressure zone with 4 rollers - End trimming saw - Integrated edge trim collection bin - Multi-profile milling unit, R2, with pneumatic adjustment between thin and thick edge - Corner rounding unit R2, pneumatically adjustable between thin and thick edge; the molding router can also be used for shelf program, rounding only on straight edges, not corners - Radius scraper R2, pneumatically retractable - Glue joint scraper, pneumatically retractable - Hood lock - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts on the milling and scraper units have been replaced or rotated, saw blades have been sharpened. The machine is ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced but are still sharp. Paintwork has been touched up. The Hebrock AKV series is the predecessor model to the current K series. Machine has only approx. 730 operating hours (glue pot switched on), but the frequency converters have only been switched on for approx. 455 hours. Machine is in very good condition—see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (LxWxH) Weight: approx. 1550 kg The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this seller.”

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Lhjdpfx Ajuxqzusgzjr Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features and Technical Specifications: Processing dimensions: - Workpiece thickness: 8–60 mm - Workpiece width: from 70 mm - Edge height: up to 8 mm - Edge thickness (roll material): up to 3 mm Feed: - Speed adjustable from 8 to 14 m/min, stepless adjustment Gluing technology: - Gluing system for granulate - Glue pot positioned above the feed - HOMAG QA 65 N interchangeable glue pot - Designed for processing EVA and PUR adhesives - Quick-change function Units: - Jointing/milling unit - Preheating zone - NC-controlled pressure station Lhsdpfx Agoxz H U Uszer - Front and rear end trimming with two motors - Station for flush, radius and bevel processing - Corner copying unit with two motors - Scraper units: profile and flat scraper - Buffing unit Additional and operating equipment: - Integrated spraying unit - Air cushion table for workpiece support - PU pressure rollers - Mechanical entry lock - HOMAG powerTouch control interface - Machine in right-hand configuration - CE compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: short-term Location: North Rhine-Westphalia

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Lhodsd Rg Dpjpfx Agzsr Total installed motor power Kw 23.3

Condition: used, Compact Hebrock EURO 3001 edge banding machine for precise edge banding of panel material. The machine enables clean edge processing thanks to automatic glue application, pressure rollers, and finishing units. Ideal for furniture and interior design. Technical specifications subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling Ljdexdc D Rspfx Agzshr workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP Lsdporrw Ucjfx Agzohr - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Lsdpoq Rb Irofx Agzehr

Condition: excellent (used), Catalogue number: 7265 Lsderm I T Hspfx Agzohr TECHNICAL DATA SURFACE PLANER: - Shaft width: 510 mm - Noise-reducing comb - Shaft guard - Original cast iron tilting fence - Table length: 2060 mm - Both infeed and outfeed tables adjustable - Extraction port diameter: 150 mm THICKNESSER: - Maximum workpiece thickness: 200 mm - Thicknesser shaft guard - Electric height adjustment for planing depth From above: - Anti-kickback fingers - Serrated infeed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth outfeed roller From below: - 2 adjustable rollers on lower table - 2 feed speeds: 7 / 14 m/min - Extraction port diameter: 150 mm - Brake - Main motor: 4 kW - Dimensions (LxWxH): 2200 x 1400 x 1050 mm - Weight: 1055 kg ADVANTAGES – Made in Germany – Brake – Noise-reducing comb – Electric planing height adjustment – Not repainted – Very good condition, used machine Original photos Start-up video: youtube.com/watch?v=7_aygbppcsY Net price: 16,900 PLN Net price: 4,020 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with greater fluctuations)