Tool cabinet with telescopic drawers

Condition: excellent (used), functionality: fully functional, 2 - Urban AKS 1200 head welding machine - Welding length max. 2500 mm - Weld bead limit: 2 mm Godpfx Ahev Rmm To Eskd - Burn-off: 6 mm - Set of support arms

Condition: new, Dimension of sliding table- 1600x375mm Gsdpfxjfd Raaj Ah Eekd Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm

Condition: new, Year of construction: 2020, I - beam section - flat steel 80 x 15 (d600) mm I-beam section - upend 60 x 10 (d800) mm Gkodjgvqvmjpfx Ah Ejd L-beam 45 x 5 (d600) mm bar material - diameter 35,0 (d700) mm tube diameter 60 x 2,0 (d1000) mm square material 45x45x3,0 mm total power requirement 2,25 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 780 x 950 x 1450 mm - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm

Condition: used, mileage: 57,671 km, power: 96 kW (130.52 HP), gearing type: automatic, axle configuration: 4x4, overall weight: 4,600 kg, empty load weight: 2,300 kg, maximum load weight: 2,300 kg, operation weight: 2,000 kg, first registration: 09/2001, Year of construction: 2001, machine/vehicle number: 673T, Equipment: ABS, all wheel drive, differential lock, trailer coupling, TÜV and AU are made NEW Army vehicle from the swiss army. The Mercedes Sprinter is in a super good condition, also the body is in a really good condition ! ! ! unimaginable how the Swiss manage to do this, despite its age. The top can be removed very quickly with windows in the tarpaulin; immediately ready for use, very well maintained and serviced directly by the military! ! !Equipped with: Automatic with 4 gears (can also be shifted manually) plus differential lock and all-wheel drive; flatbed completely made of aluminum with lashing eyes on the right and left on the floor, the body is secured with 4 bolts and removable. The Sprinter has a military trailer coupling, believe that the Tüv will not remove it; 4-cylinder diesel engine with 2248cm³ displacement; (truck approval with 3 seats in front); good tires 225 / 70R 15; The unladen weight of the Sprinter is 2300kg without body !!!!! Several other all-wheel drive vehicles and other military vehicles are still available in my offer. All my vehicles can be seen on my homepage padh. You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with MOT. Gedpeqx Szkofx Ah Ejkd even with TÜV. There are also an unimaginable number of spare parts and accessories. Why would you settle for anything less? Give us a call on 0049 (0)2248, best regards, Philipp from Hanfbachtal

Condition: used, Year of construction: 1970, x-travel:900 mm y-travel:250 mm Gkjdpfxocxxqre Ah Esd z-travel:370 mm table surface area:1525 x 325 mm total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Year of construction: 2007, condition: good (used), Machining centre for steel / stainless steel / aluminium profiles - Machine with 4 CNC-controlled axes and a 6-position tool changer - 3D CamPlus / Job machining software - Spindle speed 18,000 rpm Type: CNC Milling Centre Brand: Emmegi Model: Phantomatic Isola T4 Star Description: FOUR-AXIS CNC machine! Emmegi 4-axis CNC milling centre with tool magazine. Key features: Max. axis travel: 3135 x 300 x 350mm (X Y Z) Max. workpiece dimensions: 2990 x 150 x 150mm Overall machine dimensions approx. 4800 x 1900 x 2170mm Gjdpfxew Amcqj Ah Eokd Software: 3D CamPlus / Job

Condition: excellent (used), Four-jaw chuck make Roto Record Gksdsg Rxh Iepfx Ah Esd type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: Gkjdpjfgyicofx Ah Esd 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the left and right sides for extra-long profiles. Gsdpfowiixujx Ah Eekd - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Godpfxot Ambwe Ah Ejkd