Screening Machine Mogensen Bar Sizer VX 2058

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00284, Year of construction: 2019, operating hours: 7,836 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load centre: 500 mm Lhedoyiawdopfx Ab Tjc Load distance: 374 mm Wheelbase: 1,319 mm Lift: 3,180 mm Free lift: 150 mm Length including fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase centre: 114 mm Aisle width for pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width for pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot distance: 1,487 mm Height of mast lowered: 2,160 mm Height of mast extended: 3,742 mm Overall height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Height of mast extended: 3,742 mm Overall height above overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 7,836 h EQUIPMENT Charger Attachment: Side shifter Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panoramic roof Digital display Interior rear-view mirror Operating manual Note: The seat upholstery is worn.

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Incl. substructure Incl. hydraulic unit, control cabinet inside of the container Lhjdpfx Aou Dkf Dsb Tsc

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. Lhsdpfx Aeyh Uxyob Toc TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! The machine will remain in operation until mid-May. Viewing can be arranged by appointment! Lhsdpjyh Uw Nofx Ab Tec

Condition: not inspected (used), Double knee jaw crusher Model: RB 1200/900 Feed opening: 1,200 x 900 mm Lhjdpor Nvk Isfx Ab Tec

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 560123, functionality: fully functional, volume flow: 16,000 m³/h, total length: 12,000 mm, total width: 2,400 mm, Equipment: CE marking, TECHNICAL DETAILS Capacity: 16,000 m³/h Number of filter bags: 180 pcs Connection diameter: 600 mm Main fan: 22 pcs MACHINE DETAILS Dimensions (L x W): 12,000 x 2,400 mm EQUIPMENT CE marking Lhedpfxoyh Nyfj Ab Tjc

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit 3. Pressure rollers (tools included) 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Lhsdpfx Asyh Nt Sob Tjc Transport packages: 1 EQUIPMENT CE marking

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz Lodpfera Dddjx Ab Tjhc - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, controller model: Delem DA-41s, bending force (max.): 40 t, working width: 1,800 mm, stroke length: 100 mm, number of axes: 4, TECHNICAL DETAILS Travel distance: 1800 mm Max. stroke: 100 mm Pressing force: 40 t Lhodpfx Asyh Nrbsb Tec Number of axes: 4 MACHINE DETAILS Control: Delem DA-41s Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,900 x 2,140 mm Transport weight: 5,500 kg Number of transport packages: 2 Connected load: 4.0 kW EQUIPMENT Tools Quick-release punch holder European-style tool holder type Finger guard

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Swing diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel X-axis: 271 mm Travel Y-axis: 600 mm Spindle bore: 62 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS CNC control manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Unladen weight: 5,000 kg Transport weight: 5,000 kg Lhjdpfxsyh Npmo Ab Tec EQUIPMENT Chip conveyor Three-jaw chuck Bar feeder Driven tools C-axis

Condition: like new (used), “Hazemag Universa 1620” for Sale Manufacturer: Hazemag Type: Universa 1620 Rotor size: 1.600 x 2.000 mm Inlet size: 2.500 x 2.000 mm Lhsdpfx Aboggflvo Tsc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm MACHINE DETAILS Lhsdpfxeyh Nl Io Ab Toc Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, turning diameter over bed slide: 630 mm, center height: 315 mm, center width: 8,000 mm, spindle speed (max.): 1,180 rpm, empty load weight: 9,000 kg, TECHNICAL DETAILS Centre height: 315 mm Centre distance: 8,000 mm Swing diameter over bed: 630 mm Swing diameter over cross slide: 360 mm Bed width: 700 mm Spindle bore: 62 mm Max. spindle speed: 1,180 rpm MACHINE DETAILS Control: Conventional Connected load: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 10,560 x 1,710 x 1,400 mm Unladen weight: 9,000 kg Lhodsyh Nk Rspfx Ab Tec EQUIPMENT Digital readout

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm Ljdpfsb A Ii Ssx Ab Tohc -side threaded ratchets for skip containers -Functionally tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 46876, Year of construction: 2019, operating hours: 15,564 h, load capacity: 2,500 kg, lifting height: 5,570 mm, free lift: 1,580 mm, fork length: 1,060 mm, fork width: 1,360 mm, TECHNICAL DETAILS Lifting capacity: 2,500 kg Lift height: 5,570 mm Free lift: 1,580 mm Overall height: 2,450 mm Fork length: 1,060 mm Fork width: 1,360 mm Minimum fork width: 290 mm MACHINE DETAILS Power type: electric Mast type: Triplex Dimensions & Weight Lsdpfjyh Nhpex Ab Tshc Dimensions (L x W x H): 1,530 x 1,500 x 2,460 mm Unladen weight: 6,500 kg Battery year: 2025 Battery capacity: 930 Ah Operating hours: 15,564 h EQUIPMENT Side shift Fork adjustment New battery Half cabin Work lights Free lift