Plastic bag making machine

MAC ITALY

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Ledpfx Aksuyk S Aoqsru

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Lrodpsy Nk Haefx Akqeu Year 2018

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Speed: 100 bags/min Tube length: 270-630 mm Bag length: 220-560 mm Bag width: 110-250 mm Lrsdpsxcy H Hefx Akqou Bottom width: 60-160 mm Number of ply: 2 Photocell for preprinted reels Printing section: 2 colors inline (new anilox and rubber rollers) Bottom patch unit

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Lsdsxmkctepfx Akqoru

Condition: excellent (used), Year of construction: 2007, operating hours: 6,370 h, functionality: fully functional, Kodak Magnus VLF manual unit. Very good condition. Inspection is of course possible. Laser head with 6370 hours, good condition. Lrsdewwlmqjpfx Akqeu Inspection location: 47877 Willich.

Condition: new, Year of construction: 2025, Auger Filler with integrated load cell for permanent weight feedback during the filling process. Stand-alone version for semi-automatic filling. Suitable for dosing and filling powdery products into bags, cans, jars, or other containers. PLC controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 1-25kg (change of dosing auger necessary); accuracy (depending on product and total weight): up to 1kg max. ±2g, 1-10kg max. ±0.2%, 10-25kg max. ±0.1%; max. speed of the machine in neutral: 8 cycles/minute; hopper volume: 75L; power supply: AC220~380V, 3-phase; power consumption: 3kW; compressed air and compressed air consumption: 0.6MPa, 0.1m³/min; machine dimensions: L1135xW890xH2500mm; weight: 350kg. Lrsdpsw D Ek Ajfx Akqeu

Year of construction: 2006, condition: ready for operation (used), Specification Detail Lodpfx Aeyha N Hjkqoru Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Lredjzqt Dnepfx Akqou Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Year of construction: 2001, condition: good (used), functionality: fully functional, * Mecanelec boxmaker with autofeeder * Max working width 1400mm * Creasing, cutting, slotting *die cutting, punching Lredpfju Rnkdox Akqju * Automatic feeder * Additional AUX. tools for cutting and creasing section * Very good condition, fully refurbished

Condition: used, offer for central drum flexo press FLEXOTECNICA NG10 from year 2009 with 1280 mm web width Lrsdpoy Sfcnsfx Akqsu