Inlay woods for Maweg gluing star

Maweg

Condition: used, double-acting hand lever cylinder Storage location: Nattheim Guedpszkl T Iefx Aiheh

Condition: used, Year of construction: 1982, From business liquidation: Guedpoxq N T Esfx Aihoh Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: used, Year of construction: 1991, used frame press pneumatic working area 3000 x 2000 mm with center pressure bar absolute angular accuracy without correction comfortable working height due to adjustable press corners actuation of the working cylinders is done via 2 compressed air valves all pressure corners are adjustable the pressures can be set from 0-15 bar shipping dimensions: 320x100x270 cm availability: short-term Gjdpsw I Un Rofx Aihjuh location: Röllbach

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece 200mm - max. height of workpiece 180mm - 2 grinding units: - top: metal roller + shoe + metal roller - bottom: metal roller + shoe + metal roller - top: - 2 feed rollers, rubber, pulling - grinding unit - 2 feed rollers, rubber, pulling - bottom: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW Gusdozxqrljpfx Aihoh - 6 feed speed settings + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.75kW - main motors 2x4kW - diameter of dust extraction nozzles 80mm - overall dimensions L/W/H 1500x740x1600mm - weight 560kg ADVANTAGES - Made in Germany - 2 units - Unpainted - DTR documentation - Used grinder, very good condition Net price: 10900 PLN Net price: 2530 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Combined disc + vertical belt sander Godpfxelagdwo Aihouh Disc diameter: 600 mm Encumbrance: 110 x 80 cm, height 160

Condition: used, functionality: fully functional, Maweg SE 2 belt grinder Working width: 200 mm Gsdpfx Aioz H H Amshjuh Working height: up to 180 mm Upper and lower grinding heads

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Gjdpjvvkl Djfx Aihjuh Storage location: Nattheim

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Gsdpfx Ajw I U Ahjihjuh Availability: Short-term Storage location: Flörsheim

Condition: used, The second-hand Maweg Euronova-S hydraulic frame press is designed for pressing and assembling windows, doors and frames in professional woodworking. Featuring swivelling pressure shoes, it is also suitable for sloping windows. Technical data: Guodpfjz Hiurjx Aihoh - Press height: 2,250 mm - Press width: 4,500 mm

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded Gjdszqgg Aspfx Aihsuh hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: used, -Vorschub Holz-Her 3 Rollen Guedpfx Ajc Sl Ddoihoh

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Gjdpozd Hm Njfx Aihjuh Storage location: Nattheim.

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines Gjdsf N Nflopfx Aihsuh 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Gusdpowt Abwsfx Aihoh Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Guedpfjzk Nwksx Aiheh Location: Röllbach