Center Lathe

MEUSER M 0 L

Condition: used, Year of construction: 1962, functionality: fully functional, center height: 205 mm, center width: 1,200 mm, bed width: 320 mm, overall weight: 1,200 kg, Leadscrew and feedscrew lathe Meuser M0L - Year of manufacture: 1962 - Fully functional, connected, ready for demonstration - Centre height: 205 mm - Centre distance: 1200 mm Klsdpfxjx Ihano Ab Sol - Spindle bore: 47 mm - Spindle speeds: 28 - 1250 rpm - Bed width: 320 mm - Total power requirement: 5.5 kW - Machine dimensions LxWxH: approx. 2.30x1.10x1.25 m - Weight: approx. 1200 kg - Extensive accessories (see photos) - Serial no.: M0L - 30158

Condition: used, Year of construction: 1987, Heavy-duty disc sander Kledpowi Rn Rsfx Ab Sol Model making machine with electric table tilt and digital display With approximately 20 additional sanding sheets Used, excellent condition, little used Make: L.A.R. Type: LVA D800 Year of manufacture: 1987 Machine no. 87-11-2 Many accessories Right table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Left table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Double-sided Disk diameter 800 mm New price approx. €20,000.00 Extraction connection D 140 mm Space required approx. 1500 mm x 1000 mm x 1600 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition as seen No guarantee or warranty

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Spindle bore: 47 mm Spindle mount: size 6 Tailstock taper: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg Kljdpfx Abov Du Ixj Ssl

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 Kedpfju Ix D Asx Ab Sjll tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box Ksdpfx Abocnw U Do Sell The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device Kledpeg Hkmrsfx Ab Sjl - Chip tray, extendable - LED machine light - Operating tool

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Klodpfefww Sqsx Ab Sjl Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Drill bits, twist drills, drill bits Kledporqinqefx Ab Ssl -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Kledpfoxladwjx Ab Ssl

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm Klodpju Ixznofx Ab Sol turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *