CNC lathe

Mori Seiki Duracenter 310

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS Ppjdsyuqacepfx Aczow CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U Ppedpfx Asvbh N Rjczew tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: Ppjdpfx Ajy Ixxboczow The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: used, Year of construction: 2003, turning diameter 430 mm Psdpfx Aey Sblxeczspw turning length 519-525 mm control Mori seiki MSX-805 x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] Pjdpfx Acsyzgc Ujzjpw INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm Pedpfx Acsympcajzspw • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 398 mm, travel distance Z-axis: 214 mm, total height: 1,800 mm, total width: 1,900 mm, product length (max.): 2,200 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details. • Operating hours: approx. 10,000 Ppjdpfx Asyxgg Ijczjw • Automatic cycle time counter has not reached its limit (indicates relatively low usage) • Operated in single-shift environment • Currently under power Additional equipment • Renishaw tool setter • Workpiece catcher (never used) • Röhm chuck, approx. 1.5 years old Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Max. spindle speed: 5,000 rpm Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website. Pjdpfx Aezkr Skeczspw

Condition: excellent (used), 321 USED WP Matador MD 125 Deck Baking Oven. EXTERNAL DIMENSIONS (in cm): - Width: 185 cm, - Length: 335 cm, - Height: 242 cm. Podpoyq Hc Sofx Aczspw TECHNICAL DATA: - Number of shelves: 5 - Baking area: 12.5 m² We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR Pedpfx Ajzda Hweczjpw