Desiccant air dryers, 2 units, for 2,850 EUR

Motan MDC800

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan Bedpfx Ajmgadpjkxslg – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Bledex Dkmgepfx Akxeg Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Bjdpfx Ajpu R Ncekxslg Weight: 285 kg

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Blsdpfeuk I Etsx Akxog

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled Chiller Cooling capacity: 7.9 kW at supply/return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with coaxial evaporator for efficient heat transfer Internal P3 pump for reliable circulation of cooling water Buffer tank with 50 l water volume for short-term load balancing Speed-controlled fans for demand-based cooling and reduced energy consumption Blsdpfjfy Rykox Akxeg Control: compatible with common control systems, ideal for easy integration Suitable for smaller cooling applications, such as the plastics industry

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Bodpfxovzrxco Akxelg Compressor 1pc - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Condition: used, Year of construction: 2023, The used refrigeration system uses the low GWP refrigerant R454B Bodpfx Akehmkixexjlg Cooling capacity 70 kW at 7/12°C and 35°C ambient temperature. The system is equipped with an internal P3 pump and an internal 410 l buffer tank. The fans are speed-controlled and an internal bypass is installed. The system is perfectly suited for process applications thanks to its coaxial evaporator.

Condition: new, Year of construction: 2023, Chiller with 25KW cooling capacity at 7/12°C, internal P3 pump, internal buffer tank with 110l, scroll comperssor, coaxial evaporator for process applications Bjdpfjgkan Ssx Akxslg

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 33.8 kW (45.96 HP), type of input current: three-phase, type of cooling: air, overall weight: 460 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,600 mm, total height: 1,570 mm, warranty duration: 6 months, Aircooled chiller RHOSS TCAEY133 33.8 kW Cooling capacity: 33.8 kW / 9.61 tons (12/7 — 35°C) Year of manufacture: 2015 Bljdpowd R Rnofx Akxsg Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Panasonic C-SCP510H38B (scroll) Type of refrigerant: R410A Number of fans: 1 pcs. Dimensions: 1.6x1x1.57 m. Weight: 460 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy Bledpevgutaefx Akxsg For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.