Moulder

Moulder Wadkin GA220

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, Tsdpfx Aezkmqzoknoc rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Tjdpfjxfvp Aex Aknoc Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom Tsdorg Exropfx Aknsc 7th wave: uni-wave

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. Tedowfqh Aepfx Aknec We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: new, Type DC-9052 Air delivery 4560 m³/h Inlet diameter 4x100 mm/ 1x180mm Fan diameter 356 mm Bag capacity 307 l Collector bag ø 480 × 4 3 phases 400V/50 Hz Motor power 5,6 kW Tsdpofiiwxsfx Aknjc Dimensions 2764x585x2355mm Transport dimensions 1600x720x840mm Weight 125 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 IMPORTANT: Available from mid October 2026 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION Tedpfxsztl N Uo Aknoc MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Todpfx Aszbrn Ieknec Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Todpfx Asztpw Noknec - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and Todpfxodx Elmj Aknoc

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Tsdpfx Aszku Rpjknoc Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space