Used 5 Axis Cnc Machining Center for sale (76,342)

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar Ibedpfjxap Eaox Agzsf voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: used, Year of construction: 2011, travel -x axis 570 / 500 (1.070) mm travel -y axis 650 mm travel -z axis 530 mm control HEIDENHAIN iTNC 530 number of spindle speeds 12.000 U/min tool taper SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, ITC (50bar), zero-point clamping system and chip conveyor. The machine only has 7.863h spindle hours. An extensive tool package is included. Iedpfxowlvras Agzebf The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS605 K IC 40 | RS-605 | RS 605

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Ibedpfx Aogmi Unjgzof Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Ibedpfegqg Sgex Agzsf Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: excellent (used), CNC INFOTEC Machining center Model: 3121 3-axis Year of production: 2016 Machine working area dimensions for axes X and Y: X: 2200 mm Y: 3100 mm Head stroke in the Z axis: 250 mm Machine working speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table Ibjdpoun Rqyofx Agzjf Price of a new machine: approx. 75.000 € Price: 27.900 €

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 28 m/min, rapid traverse Z-axis: 28 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Fanuc, controller model: 0i-MF, table width: 650 mm, table length: 2,500 mm, spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, Mobile column vertical machining center Deli HB4D-250 - X-axis travel: 2,500 mm - Y-axis travel: 660 mm - Z-axis travel: 750 mm Iodpfsxiv Dbjx Agzebf - Tool magazine capacity: 24 positions - BT 40 - Automatic, continuously tilting head on B axis with rotation +/- 110° - Integrated high-power, high-torque electrospindle, speed: 20,000 rpm - Hinged belt chip conveyor - High pressure through spindle: 30 bar - Pendulum machining capability - FANUC 0i-MF5 Beta CNC unit - Industry 4.0 & 5.0 package

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: PIS 3837, travel distance X-axis: 4,500 mm, input voltage: 400 V, type of input current: three-phase, CNC Gantry Milling Machine PRATIC PIS-CNC 4500S-2W (Year 2019) CNC gantry milling machine PRATIC PIS-CNC 4500S-2W from ongoing serial production, year of manufacture 2019. The machine has been used for machining metal parts and furniture fittings and is fully functional. Application area: – Milling and drilling of aluminium and steel profiles – Machining long parts/profiles in series production – Ideal for fittings, metalworking, and profile processing industries Technical features (excerpt): – Gantry design with large machining area (X-axis approx. 4,500 mm) – CNC control with user-friendly interface – Sturdy machine table with clamping options for profiles and workpieces – Designed for cost-effective series production Iedpfx Agox Hp Nbezjbf Condition / Maintenance: – Well-maintained used condition from a family-run business – Machine is currently still in use, test run can be arranged by appointment – Regularly serviced during ongoing operation – Power supply: 400 V / 50 Hz, total connected load approx. 30 kVA, rated current approx. 55 A – Technical documentation and photos available Inspection possible by appointment. Dismantling and loading can be organized by arrangement.

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: Ibedpfxoxxbzwe Agzef X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, functionality: fully functional, CNC machining center NESTING with fully automatic loading and unloading As with all Nesting machines: various sizes, line drilling, Becker vacuum pumps, CadCam Nesting software, CNC controller, remote control, servodrive, etc. The best machine is the one that fits your company. Specify which configuration you require. Ijdpfxjxx Uc Ue Agzjbf We guarantee reliability (see the photos) Prices starting from €85,000 – New machines You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp: We handle transport, customs clearance, and delivery to your location. Machine instruction – extra warranty – 7/24 support

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system Iedjxg Ehdepfx Agzebf VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: used, • Type - PARTICA GLP 3000 • Year of manufacture – 2013 • No. GG 1800-0690 • With 3 axes • Many diamond and polishing tools Iedpov Tya Sofx Agzebf • Dimensions: W 5200 x D 2900 x H 2000 mm • Travel paths approx. 3150x1415 mm • 16-position tool changer • Weight: 4300 kg Very good condition, little use, from a small company.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine Isdpfewfdm Eox Agzjbf EPS cutting machine with 4 independent moving axes and variable machine table.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Iedpouu Ntgofx Agzobf Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 Ibsdextp Hwopfx Agzef CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, number of spindles: 16, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Numerical Pegasus-Cad software Working area in X - 3050mm Working area in Y - 1220mm 2 working zones Lifting feed table, stackable Ibodpfx Agexx T R Dezsf Automatic loading system, Schmalz type Label printing system with automatic application on the loading table ATC 3-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 Automatic tool change system with 16 positions - positioned at the rear of the machine Automatic tool change system, carousel for fast changeovers Automatic unloading system with motorized conveyor belt Automatic worktable cleaning system Protection and safety system with light curtain and fencing Automatic lubrication system 250 m3/h - 5.5 kW vacuum pump Contact by phone: 0031634707163 Transport, installation, and user training negotiable Danmar Machines BV Almelo

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 67-10458, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 110 mm, workpiece height (max.): 100 mm, total height: 580 mm, total length: 1,790 mm, total width: 1,170 mm, number of spindles: 1, tool diameter: 8 mm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, For sale due to a career change: my hardly-used entry-level CNC milling machine with extensive accessories as shown in the photos. The 5-watt laser module is also included. A detailed description can be found on the CNC Step website. Ibedpfxsxr Rb He Agzjf

Condition: used, Year of construction: 2007, x-travel 1.350 mm y-travel 1.150 mm z-travel 895 mm table diameter 4.590 x 6.990 x 3.150 mmmm handwheel el. tool adaptor HSK-A63 turning speeds 24.000 U/min engine output 38 kW Iedpfx Agexddttezjbf table weight 1.600 Kg 92 fach Control HEIDENHAIN iTNC 530 a-axis A +16/-120 c-axis 360 ° weight of the machine ca. 14.000 kg dimensions of the machine ca. 4.590 x 6.990 x 3.150 mm

Condition: repair required (used), Year of construction: 1995, operating hours: 18,000 h, functionality: limited functionality, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, For sale is a DECKEL MAHO DMU 80 T, a robust and precise 3-axis machining center with a large clamping area. The machine is still connected to power and operational—a test run can be arranged upon request. However, an overhaul of the axes is necessary. On-site loading can be organized. Technical Data: Travel (X/Y/Z): 880 / 630 / 630 mm Clamping surface: 1250 x 700 mm Table load: 600 / 500 kg Spindle taper: SK 40 (DIN 69871) Speed range: stepless 20 – 12,000 rpm Control: HEIDENHAIN TNC 426/430 Feed (X/Y/Z): stepless 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 25 stations Tool data: Ø 80 / 130 mm | Max. length: 315 mm | Max. weight: 8 kg Total power requirement: 60 kW Machine weight: approx. 9.6 t Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m Accessories Electronic hand pendant Chip conveyor (screw conveyor) Coolant system Ibodpfx Agoxphdgozof ✅ Your advantages at a glance: Immediately ready for operation – machine is connected and can be tested Heavy-duty 3-axis machining center High spindle speeds & feed rates for efficient machining On-site loading possible Attractive price-performance ratio Location: 69181 Leimen Fixed price: €10,000 If you are interested or would like to arrange a viewing/test run, please get in touch!

Condition: excellent (used), 5-axis Year of production: 2018 Iodsun Rqgopfx Agzsbf Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2021, operating hours: 250 h, Description APS-2030 Quotation Entry-level model 3-axis gantry milling machine Area of application simple applications in wood, plastics, etc. Model: V-2030 Table size [mm]: 2000 x 4000 Working area X and Y axis mm 2020 x 3020 Working area Z axis [mm]: 30cm Vacuum zones 6 pieces Equipment Steel construction simple frame construction with reinforced gantry frame Switching element and control in the external control cabinet. to reduce the installation area Work table material: hard PVC Functions T-slot and vacuum plate divided into 6 sections Travel system X and Y axis rack and pinion drive Travel system Z axis ball screw (TBI) Iodpfxevy I Iwe Agzsbf Linear guides on X, Y and Z axis PMI Travel motors servo X, Y and Z axis (Delta) Spindle 9 kW air-cooled ( max. travel speed 60 m/min max. working speed 40 m/min Working accuracy < 0.2 mm Repeatability 0.03 mm on 300 mm Workpiece positioning optional Tool length sensor yes Control Eding CNC Software Vectric CUT2D Electrical connection Electrical connection 3 phases 320 V, 50 Hz Ambient temperature 0° C -45 °C all prices quoted are net plus the currently applicable statutory VAT.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Programmable drilling machine with easy-smart-touch software, 3 controlled axes. Panel handling with triple suction cup. Machine built according to CE regulations. STANDARD EQUIPMENT MAIN UNIT: Head with independent spindles No. 7 vertical lines Ijdpfx Agsxwb Tdezsbf No. 1 TH1 horizontal double spindle (X-axis) for front/rear drilling Manual panel alignment END PANEL READER for perfect matching Remote assistance software Suction flange Scratch-resistant BRUSH TOP to prevent dust and chip accumulation Working MODE selectable from the operator’s side or in continuous cycle HARDWARE & SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB and Ethernet port for file import, online support, and software updates Linux-kernel-based system Fobmsu U Hgiegku S Hepp CNC memory for up to 1,000 programs to buy call: 0031634707163 Almelo

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data Iodpfowlqpyox Agzobf - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: new, Year of construction: 2023, safety matsafety mat for CNC Allen Bradley Lignum new .thickness . series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol Vinyl, IP67 at Allen Bradley safety mat, length 1.5m, width 1m - 440F-M2030BYNN The Allen Bradley Safety Mat from Rockwell Automation is a safety device that detects the presence of a person in dangerous locations. It can be connected to the control circuits of industrial machines in dangerous spaces, creating a protected area measuring 1.5m (length) x 1m (width). When the layer's detection surface detects a person, it sends a signal that shuts down the machine, preventing injuries and improving safety in the workplace. The durable vinyl material can withstand bleach, acids, and other industrial chemicals, making it a good choice for use in harsh industrial environments. This mat is commonly used to restrict access to hazardous areas in factories. Features and Benefits • Hardened steel plate construction for added durability • 4-wire open and short circuit detection system for added electrical safety • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications Standards and Certifications • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe for use in damp or wet locations? IP67 rated CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat has an IP67 (ingress protection) rating, meaning it is protected against dust and can be water resistant for up to 30 minutes. This makes it safe to use in damp locations. Technical data Attribute Parameter MatGuard range Series 440-F Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Vinyl plastisol IP class IP67a for CNC Allen Bradley Lignum 1600x 800 Ibodpfx Aewkrxtjgzef

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 300 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,500 mm, table width: 1,500 mm, table length: 1,700 mm, overall weight: 800 kg, spindle speed (max.): 24,000 rpm, Gantry milling machine for processing wood, plastic, and aluminum panels, complete system with PC programming station, measuring probe, radio remote control, Festool dust extraction station (without vacuum cleaner), CNC programs Constructcam-3D and Kinetic-NC Iedpfxjv I Duio Agzebf

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Iodjxzhfnopfx Agzobf Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!