Used 5 Th Axis Quaser for sale (33)

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Table: ∅320 mm Passages: X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Bedpfx Asuclileb Uowk Tool probe very good condition of the machine machine can be loaded on a standard truck height of the machine 275cm width 245cm length 300cm weight of machine 7300kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 314C19003, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Quaser UX630P — 5-Axis CNC Machining Centre, 2020 Key specifications: - Simultaneous 5-axis, B-axis ±120°, C-axis 360° continuous - Spindle: HSTec HM-15A Built-in, HSK-A63, 15,000 rpm, 51 kW, 162 Nm - Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm, 500 kg load, max. workpiece Ø630 × 540 mm - Control: Heidenhain TNC 640, incl. options DCM, Kinematics Opt, LAC, DNC (Opt. 18) - Tool magazine: 90 positions (HSK-A63) - Through-spindle coolant 20 bar, Heidenhain linear scales on all axes Bwedpfxjyt Ha No Ab Usk - Renishaw 3D workpiece probe + Blum laser tool measuring system - Schunk Vero-S zero-point clamping system - BMO robot interface installed and programmed - Year: 2020 | Original purchase price: €370,000 Approx. 150 HSK-A63 tool holders available for takeover — subject to separate negotiation. Full specifications and equipment list available in the attached PDF. Machine can be inspected in operation. Video and test run on request. Location: Ommen, Netherlands. Operating hours spindle: 4,726 hours!

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Bsdpfx Absymg Iys Uewk

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Spindle mount Bt 40 Spindle speed 12000 rpm Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Axis B 360 degrees Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Equipped with Internal spindle cooling Chip conveyor Bwodpfxstr Um To Ab Usk

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 3,500 h, travel distance X-axis: 410 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 100 kg, number of slots in tool magazine: 48, spindle speed (max.): 1,500 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Control: Heidenhain iTNC 530 Smart NC X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table data Table size: 320 x 320 mm Maximum table load: 100 kg C-axis: 360° B-axis: +30° to -120° Spindle & tool holder Speed: 15,000 rpm Tool holder: SK 40 Tool changer: 48 positions MACHINE DETAILS Total power requirement: 35 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.15 x 3.8 x 3.28 m Machine switched on: approx. 9,600 h Spindle running time: approx. 3,500 h EQUIPMENT - Chip conveyor - IKZ 20 bar (internal cooling through the spindle) - Electronic handwheel Bedpfx Aevzacpsb Uswk - 3D measuring probe and KinematicsOpt for optimal machine calibration

Condition: excellent (used), X 885, Y 800, Z 500mm, A 30-120dg, C 360dg. HSK 63 Big Plus, 15,000Rpm, ATC 60 pos, Renishaw probe, Heidenhain TNC 530. Bwjdpfswzv Igjx Ab Uek

Condition: good (used), Year of construction: 2022, QUASER UX 500 C 5-Axis Universal Machining Center Year of manufacture: 2022 Control: SIEMENS S828D Machine number: 315D210043 Only approx. 1,500 spindle hours (as of 25.03.2026) Equipment: SIEMENS S828D / PPU 290 with 15-inch touchscreen and movable operator panel, tiltable and rotatable Software option: 3D simulation Software option: Network drive management Includes temperature-controlled cooling system Portable electronic handwheel Heat exchanger for control cabinet system Double-arm tool changer with 48 magazine positions Pneumatically operated tool change door High-precision glass scales in X/Y/Z including overpressure system to prevent contamination Direct measuring system on rotary axis Direct measuring system on tilting axis Main spindle SIEMENS SK40 with 12,000 rpm, 13.3 kW / 85 Nm (S6-25%) coupled, SC-4.2 including temperature-controlled cooling system including internal coolant supply with Grundfos pump, 20 bar, 25 l/min including cartridge filter 25 μm Infrared receiver for workpiece and tool measurement 3D infrared touch probe RENISHAW OMP 40-2 for workpiece measurement, including software option for in-process measuring cycles Toolsetter OTS for tool measurement, including quick-change adapter SW option for kinematic measurement cycle 996 SW option for measuring cycles for workpiece inspection and measurement / automatic operation Three-color signal tower Cartridge filter for ring cooling and chip flushing Coolant spray gun Deublin rotary union External air blast for dry machining Additional air blast through the spindle, switchable via M-function Automatic hybrid central lubrication for guides and ball screws Scraper belt chip conveyor for universal applications, suitable for short to medium-length chips Chip disposal consisting of work area chip washdown with Grundfos pump, 75 l/min at 3 bar Chip trays made of stainless steel and 2 auger conveyors in the work area Work area fully enclosed safety cabin with 2 corner sliding doors 2 work area lights Bodpfx Abeyyaire Uowk Flood coolant with 10 ring-shaped outlets at the spindle nose, with Grundfos pump, 75 l/min at 3 bar Warm-up tool Spindle cooling oil Mobil Velocite Oil No. 3 Included in the delivery: Spring-loaded 2-jaw power chuck, SCHUNK model KSF3-250 Approx. 70 tool holders, partially equipped with tools Chip trolley Operating manual/documentation Machine parameters on USB stick For equipment, technical data, and transport – see PDF. Images, content, and details are provided without guarantee, therefore non-binding. All other accessories visible in the photos and video are not included in the scope of delivery and are not part of this sale. The scope of delivery includes only those accessories explicitly listed here, in the order confirmation, and in the invoice. FCA (Free Carrier, loaded on truck) D-32457 Porta Westfalica Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon conclusion of purchase.

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories Bwodpfxott R E Te Ab Usk MARCELS MASCHINEN CH

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Bedpfx Ash Agwrsb Uewk MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, Bwsdpfx Abjndz Aqo Uek 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm Bwjdpfx Abswlhvwe Uek z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Spindle oil chiller Through spindle coolant Bodpfx Aex Hypxeb Uewk Floor space W x D (mm) 2,235 x 2,420

Condition: excellent (used), FANUC 18iMB Control Bodsx A E Aajpfx Ab Uowk Working travels 710 x 610 x 650 mm Tool changer with 60 Positions Spindle speeds 15'000 rpm Spindle taper BT40 2 paletts 500 x 500 mm B-axis 0.001° Cooling through spindle Tool measuring BLUM Clamping tower Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2015, Incl. chip conveyor Incl. inclined bed filter system Incl. zero-point clamping system Incl. 4th axis Rotamatik 120 Renewed: Spindle Motor with new bearings X-axis new ball screw Bedpoibat Iofx Ab Uowk New Däublin Offer on request

Condition: used, Year of construction: 2008, x-travel 1020 mm y-travel 500 mm z-travel 500 mm table surface area 1200 x 500 mm spindle taper SK 40 Bwsdpjuntnbjfx Ab Uek spindle turning speed - stepless 40 - 12.000 U/min spindle drive 18,5 kW feeds 0 - 20.000 mm/min rapid traverse 40 m/min ATC 30 Pos control HEIDENHAIN, iTNC 530 total power requirement 30 kW weight of the machine ca. 6,85 t - with coolant through spindle Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Bedpfx Aoxlf D Neb Uswk Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER Bsdpfsuhbv Ssx Ab Uewk - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,737 h, machine/vehicle number: 302E110064, travel distance X-axis: 885 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, workpiece diameter (max.): 640 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 600 mm, spindle speed (min.): 15,000 rpm, operating hours of spindle: 10,687 h, number of slots in tool magazine: 48, tool length: 280 mm, tool diameter: 125 mm, Equipment: documentation/manual, Machine for sale: Quaser UX600 15C - universal machining center - manufactured in 2011 in Taiwan. - 5-axis machine with direct measurement on all axes - control unit: Haidenhain iTNC 530 Operating hours: 39,737 Purpose: milling Machine length: 3700mm Machine width: 4000mm Machine height: 3100mm Machine weight: 12,100 kg Number of spindles: 1; spindle speed range: 15,000 1/min Strokes: X axis: 885mm; Z axis: 500mm; Y axis: 800mm Bwsdpfowlpywsx Ab Ujk Table external length: 600mm external width: 500mm Tool maximum tool length: 280mm maximum tool weight: 7 kg maximum tool diameter: 125mm tool holder: SK 40 internal cooling: yes The machine works in 3 shifts - every day! The machine comes with 20 SK40 holders!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,400 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,880 mm, total width: 3,680 mm, table load: 1,800 kg, overall weight: 9,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 3, This 3-axis Quaser MV-204 CP vertical machining centre was manufactured in 2007. It features a working area with X-axis travel of 1200 mm, Y-axis travel of 700 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking to get high-quality milling capabilities, consider the Quaser MV-204 CP machine we have for sale. Contact us for further details. • Machine table: 1400 x 700 mm • T-slots: 6; width 18 mm; spacing 100 mm • Distance table to spindle nose: 150–760 mm • Spindle type: WEISS WB-40R • Spindle torque: 192 Nm • Tool changer: 30 positions • Utilities: compressed air 6 bar; voltage 400 V; mains fuse 63 A; connection cable cross-section 4 x 16 mm² • Usage/condition notes: • Spindle collision in 2018; spindle functions for plastics, but spindle condition should be assessed • Machine out of operation for approximately 6 months due to new purchase • Spindle hours: 8,400 Additional equipment • Coolant system with 600-liter tank • Chip conveyor • Heidenhain handwheel HR410 • Various milling chucks • Haimer shrink-fit chuck Bodpfxsyw S Dij Ab Uewk • Slimline base holder for DuoBlock • Various collet base holders (without collets) • Albrecht drill chuck • Haimer dial gauge • Complete machine documentation Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, Bwodsx Awzbopfx Ab Usk 4th axis will come without parts shown by hand.

Condition: used, Year of construction: 2012, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 7,000 kg, Quaser MV184 P 3-axis cnc center Bwedpfx Asufh Dkjb Uok passes: X1020mm Y610mm Z610mm Table size 1200x600mm Spindle 22-30Kw max 12000 rpm Tool magazine 30 pieces BT40 Renishaw OMP40 measuring probe Spindle cooling 20 bar Fanuc 31i control with USB 1GB memory with machine chip conveyor, tools, measuring probe, documentation of the machine very good condition of the machine

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Bsdpexf Nbrsfx Ab Uewk Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: used, Quaser MV 204 incl. 4th axis dividing head Year of manufacture: 1998 Chip conveyor Info: Spindle and rotary union were replaced in 2022 and have only 400 operating hours. Control system: - Fanuc 18MC - Electronic handwheel Travel paths: - X: 1000 mm, Y: 600 mm, Z: 600 mm Main spindle: - SK 40 - Maximum spindle speed: 10,000 RPM - Spindle cooling Tool changer: - 20 magazine positions Availability: - Immediately Bodeywlc Espfx Ab Uowk Special features: - Machine is ready for immediate use. - Machine is available for prompt delivery. - Machine can be inspected and tested under power at the location. - Machine will be loaded onto truck free of charge. - Forklift for loading is available. - Transport can be organized upon request.

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2650 mm Measurements depth 2220 mm Measurements height 2855 mm Machine weight 8200 kg Main Drive Spindle speed range 10000 rpm Spindle motor power 15 / 33 kW Tool taper BT-40 Movement X-Axis Movement 700 Y-Axis Movement 590 Z-Axis Movement 480 Bodpfx Aox D Scpeb Uowk This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW. The machine includes a 32-position ATC, chip conveyor, and internal coolant at 20 bar. Consider the opportunity to buy this Quaser MV 204 IIU/10 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm Bsdpfjx Enkusx Ab Uewk This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Application Types Milling