Vertical machining center

Quaser MV 154 P

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call. Gsdpfxjzxz Dfe Al Uekc

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gedpfxeh Nypfo Al Uokc

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Gedpfx Aljz Dttgo Uekc Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg Gkodpfey Skmrex Al Uec • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Brand new Spindle installed as end of April 2026

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC Gkodpfx Aeyft S Ael Uoc The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Gkedpfewtg Insx Al Uec Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: excellent (used), DOOSAN VC 630/5AX YEAR 2015 CNC HEIDENHAIN 530 AXIS TRAVEL: -X: 650 mm -Y: 765 mm -Z: 520 mm -A: 150 (+30 -120º) – (0.001º) -C: 360º (0.001º) TABLE: -5 Continuous axes Gkedpfx Aszc Hm Uel Ujc -⌀ 630 mm -Distance from spindle to table: 210-730 mm -Max. permissible weight: 500 kg RAPID TRAVERSE: -X: 40 m/min -Y: 40 m/min -Z: 36 m/min -A: 20º/min -C: 30º/min BALL SCREWS: ⌀ 45 X 16 (X, Y), ⌀ 45 X 12 (Z) mm ELECTRIC SPINDLE HEAD ISO 40 DIN69871 (*Brand new) -Motor power (continuous - 30 min): 24/32 Kw -RPM: 20,000 INCLUDED OPTIONS: -Optical scales on all axes -120-tool changer -Automatic pallet changer with 5 pallets -Renishaw measuring probe -Laser pre-measuring device -Chip extractor CONDITION: Machine in excellent condition. Headstock is completely new. Available for inspection in operation.

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Gedpfx Alexf Ikfs Uekc

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Gkedpfx Aljww Irio Uec Technical details shown on picture.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Godpfxjvx N Shj Al Ujkc Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).