Used Adda Drive Technology for sale (49,927)

Condition: used, 612435.1, 20 ADVANCED, MS Ultrasonic, Ultrasonic Generator Nodpfx Aet Tw Shogzjlh Model: 612435.1 Type: 20 ADVANCED Condition: Used

Year of construction: 2016, condition: as good as new (ex-display), Siemens motor 1FK7100-2AF71-1CH0 with Harmonic Drive gear HF-UC-65-80-2UH-SP from prototype machine with very few operating hours. Nledpfxeirtiqe Agzeh 2 motor-gearbox units available, each 1.500€.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Crumbler HB KRU 6 Length and diameter of crumb roll: 1740 x Ø 250 mm Engine: 7.5 and 11 kW Nsdpfxjra Dn Se Agzelh Weight: 2100kg

Year of construction: 2011, condition: excellent (used), Lift&Drive 225P electric trolley. Powder coated steel and aluminium construction. Table dimensions: 100 cm x 40 cm. Minimum height of the roller table from the base - 67 cm Maximum height of the roller table from the base - 193 cm Nominal load capacity 225 kg. Rear-wheel brake. Nlodpof T R Nxjfx Agzoh In addition to the central brake, the trolley also has a directional lock on the rear wheels, making it easier for the operator to guide the trolley in a straight line. P (Professional) trolleys are the largest, most stable, strong and flexible trolleys.

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 880 mm, total width: 540 mm, total height: 1,460 mm, overall weight: 210 kg, input voltage: 230 V, power: 2 kW (2.72 HP), input frequency: 5,060 Hz, Capacity: 60 single ties/min Nledpewzk A Ssfx Agzjh

Condition: new, Year of construction: 2023, Wood gasification technology that converts biomass (wood chips) into wood gas. The obtained wood gas is used in the production of electricity and heat. Gasifiers are reaching electrical efficiency up to 30% and with fuel utilisation rate up to 90%. The capacity of one unit is up to 140 kWel and heat up to 300 kWth. System is modular and can be used both for small project and also larger plants with electrical power up to 2000kWel and heat up to 4000kWth. Energy-producing systems are additionally equipped with wood gas filtration and cooling systems, ash removal, and emergency cooling systems. Offer for one unit include : - Wood chip feed module Nedpfxjpa Sthe Agzjlh - Gasifier - Control cabinet for gasifier - Air preheater - Gas filter - Gas cooling module - Safety filter module - Ash discharge module - Cold start module - Waste bunker - Wiring set - Engine unit with generator - Control cabinet for engine - Gasifier chimney for cold start - Chimney for engine

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min Nljdpfjvdnpiox Agzoh New pump, working hours 0 . Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system.

Year of construction: 2016, condition: as good as new (ex-display), Siemens motor 1FK7105-2AC71-1CH0 with Harmonic Drive gear HF-UC-90-50-2UH-SP from prototype unit with very few operating hours. 2 motor-gearbox units available, each 4.300€. Nlodpfxsir U Tyj Agzjh

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters Nljdpfx Agjrk Ipnezoh 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Nodpfohvmi Tjx Agzolh Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Width 40 cm Conveyor belt with metal detector, also for non-ferrous metals and aluminum Sensitivity adjustment of metal detection Nljdjww Id Eepfx Agzsh

Condition: like new (used), Year of construction: 2023, functionality: fully functional, A conveyor belt from MK is for sale, with frequency converter. If you're interested, I'd be happy to send you a video of the conveyor. L: 3000 mm Width: 500 mm Height: 580 mm Height: 300 mm - 900 mm Nsdpfx Agov Tnxpszolh Mobile, 4 brake rollers Adjustable conveyor speed, 1-11 m/min

Condition: new, Year of construction: 2025, saw band width: 40 mm, Bandsaw ZHL 64 designed for ... Main electric motor power: 22 kW. Saw blade width: 40 mm Nlsdpfx Agjwvlyuezjh Wheel diameter: 800 mm Computer Further information and price upon request. The bandsaw can be supplied as a set with a buffer ramp for sorting the sawn material in three directions.

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Nedpfxjfc I Hae Agzelh More technical details you found in the Datasheet.

Condition: used, Year of construction: 2010, functionality: fully functional, Offered for sale is a used Jantar 2 CNC-controlled flame cutting machine from Eckert Cutting Technology. The machine is located at our customer's premises and is fully functional. A viewing is possible upon request and by appointment. The Jantar is designed for precise contour cutting up to 100mm. The machine, with its double-sided drive, achieves high cut quality, even for small holes. Cutting width: 2,500mm Cutting length: 4,000mm Working width: 2,000mm Track width: 3,320mm Total width: 4,240mm Feed rate: 0 - 18,000mm/min The system is controlled via the Windows-based ECK 872 program. Thanks to its clear menu navigation, the system is ready to cut in just a few steps. The control system is installed as a ride-on version. The ECK 872 CNC control is equipped with the following features: + 15" TFT touch color display + Built-in heat exchanger + Sheet position correction + Cutting parameter selection + Program start point setting + Cutting program selection + Macro functions + Block approach + Move Back function (after interruptions, the torch can be repositioned to the exact point using the "Move Back" button) + Manual cutting + Malfunction diagnostics The CNC control is equipped with the FINEST CUT Light 6.38 software (Windows 2000/XP/Vista). It allows for designing with CAD and CAM parts, working with a flag catalog/generator, automatically creating flags based on thickness/material, and DXF-IN. The system/control is also equipped with the HD 3000 plasma torch support with arc height control. This feature is characterized by the absolutely precise guidance of the torch over the material to be cut. (Vibration tolerance of less than 20 µm on the torch shaft). The most important advantage arises from the use of the interactive CUTBUS bus system. This system transfers all piercing, cutting, and travel parameters from the technology data stored on the control system. The system also includes the ESR-600 system. The ESR-600 system is equipped with a special rotating head that allows the cutting of pipes with a diameter between 100 mm and 315 mm. The chuck is designed for pipes with a diameter of 120-204 mm and features a moving suction pipe with a collecting container inserted into the pipe. The system also includes the PFC-4 self-cleaning cartridge filter system. The advantages of this self-cleaning filter system are its optimal cleaning performance, user-friendliness, and low maintenance requirements. The filter system is equipped with a BIA M category cartridge filter (separation efficiency > 99%). Nledpfx Aswc Al Usgzjh The flame cutting table features an under-table extraction system and an internal extraction duct. The support consists of 100 x 5m steel panels, which are installed at an angle. The table is divided into sections, each 500mm wide. This division ensures optimal capture of contaminants while requiring a relatively low air volume. Cutting area (W x L): 2,000 x 4,500mm Table height: 740mm Required compressed air: 4 bar (dry, oil-free) The system must be dismantled on-site, and transport must be organized independently. If you have any further questions, please do not hesitate to contact us. The system is being sold on behalf of the customer.

Condition: used, Year of construction: 2018, Operational unit! Ask for additional information! Nledpfx Aowctqbegzjh

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz Nlodpei Hb I Tofx Agzsh · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP Nodpfxsfwfpbj Agzolh This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Condition: new, Year of construction: 2025, warranty duration: 12 months, New Stencil cleaning machine from AAT. CE certified for European market use, manufactured in the US. Nodpovzrklefx Agzolh All machines come with 12 months warranty! X30TM & X40TM Series Stencil / Misprint / PCB Cleaner CHEMISTRY TYPE: X30TM and X40TM models are available for flammable and combustible solvents/chemistries as well as aqueous based chemistries. SYSTEM CAPABILITIES: Stencil / Misprint / PCB Defluxing All In One System The X-Series system is designed around counter-rotating blind hole high energy spray bars. The added pressure allows the system to successfully clean fine pitch stencils, low stand-off components, misprinted throughhole, blind assemblies, and the ability to remove uncured glues and adhesives, yet gentle enough to use on frameless and foil stencils. Independent Wash and Rinse Holding Tanks The system features two independent holding tanks, which allow for lower water use. Final DI water rinse (if selected) displaces spent rinse water in the rinse tank throughout the rinse operation. This provides for higher tank cleanliness, and component cleanliness. Large Process Chamber Dimensions X-30TM Series Process Reservoir: 30” x 30” x 3” (76.2 cm x 76.2 cm x 7.62 cm) X-40TM Series Process Reservoir: 40” x 40” x 3” (101.6 cm x 101.6 cm x 7.62 cm) Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, OSHA Tool Specifications: X30ATM Footprint: 48.5” W X 44” D X (59” to 90”) H (123.19 cm x 111.76 cm x (149.86 cm to 228.6 cm) X40ATM Footprint: 58.5” W X 44” D X (59” to 90”) H (148.59 cm x 111.76 cm x (149.86 cm to 228.6 cm) Electrical: 220V, 60Hz, 20AMPs, 3 Phase X30ATM Weight: 500 lb (227 kg) X40ATM Weight: 700 lb (318 kg) Ask for additional information to find the best configuration for Your needs!

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Njdpjr D Nfkofx Agzslh Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) Nljdefx N Uispfx Agzjh The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, New PCB cleaning machine from AAT. CE certified for European market use, manufactured in the US. Nedjvzrhqopfx Agzolh All machines come with 12 months warranty! CHEMISTRY TYPE: Water OR Semi-Aqueous Cleaning Chemistries SYSTEM CAPABILITIES: 12” Conveyor Belt Includes 12” On load/Off load Progressive Energy Dynamic Spray Bars (PED) High Speed Cleaning (0.5 to 3.0 FPM) Coherent Jet Spray Bars Reach Under Low-Profile Components Air Knife Isolation for Low Chemistry Consumption HEPA Dry Air Filtration Integrated DI Closed Loop System “GREEN” Zero Discharge to Drain (except during maintenance) Low Power Consumption Automatic Chemical Management System Integrated Internal LED Lighting Color Touch Screen Interface Tool Specifications: Footprint: 8’ 0” X 3’ 8” X 4’ 2” (2.44m x 1.15m x 1.28m) Electrical: 480V, 50/60Hz, 100AMPs, 3 Phase Weight: 2500 lb (1134 kg) Quiet Operation:

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. Nljdpfx Ascuiz Tegzeh The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free

Condition: new, Year of construction: 2025, warranty duration: 12 months, New PCB cleaning machine from AAT, model Aqua Rose. CE certified for European market use, manufactured in the US. All machines come with 12 months warranty! Standard features: Nlodpevzrd Sjfx Agzeh • Cleans All Fluxes • Automatic “ROSE” Cleanliness Tester • Fast Cycle Time for Wash, Rinse, “ROSE” Test , and Dry • Efficient Coherent Washing and Rinsing Jets with 3 Spray Wands • Rapid Drying with Three Manifolds • 2 Board Racks with 4 Pin Inserts • Programmable “ROSE” Limits 0.01 to 10.00 ug NaCl eq/CM2 • Automatic Data Logging (Ethernet or USB) • Easy Programming with Password Protection • Stainless Steel Cabinet and Processing Chamber • Heated Wash and Rinse 104–176F (40-80C) • Programmable Rinse Purity 0.05 – 100uS • Auto Chemistry Mixing 3 - 26% • Viewing Window with Internal LED Lighting • 9” Industrial Touch Screen • Quiet Operation: < 60 db • Max Board Size: 18” x 20” (45.72cm X 50.8cm) Optional extras: • Flash Heater for Rinse (requires 60 AMPs) • Drip Tray • Sample Port • Light Tower • Transfer Station (CL & ES only) Ask for additional information to find the best configuration for Your needs!

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nlsdpfocuiz Sex Agzsh Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control