Used Adk 125 Modell for sale (20,916)

Condition: excellent (used), Year of construction: 1950, Safag Type 27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial Number: 296 Year of Manufacture: Vintage 1950s (approx.) Dual 6" diamond grinding wheels with fine grit (700) Universal tool holder Tool holder for up to 10 mm square-shank tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 Volts 3-phase Complete factory closure, large selection of storage platforms, pallet racking, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools More items – new and used – can be found in our shop! Fgodpfxeh Izv Aj Al Ueh International shipping costs available upon request!

Condition: good (used), functionality: fully functional, Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control – A LOT of accessories – CE compliant!!!! Technical data: >> Machine no. 334511, year of manufacture approx. 1995 Working area: Maximum diameter: Over the cross slide 270 mm Over the carriage 115 mm In the spindle bore 28 mm Largest chuck size 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Fgedpoz Ezc Sefx Al Ush Feeds Working feeds X / Z axis, stepless 0-5000 mm/min Rapid traverse X / Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control. The machine was manufactured around 1995 and comes with a large number of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to verify its condition.

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 Fgodpfx Aszl Dg Njl Ush KM No. 6268540 KM No. 6441936 R901196471

Condition: used, Granutech-Saturn Model 80 Grizzly – 300 HP – Tire Shredder/Grinder For sale: Granutech-Saturn Model 80 Grizzly, a heavy-duty industrial shredder/grinder. Basic specifications: Fjdpfozyplmox Al Usgh Manufacturer: Granutech-Saturn Systems Corporation, USA Model: Model 80 Grizzly Main motor power: 300 HP / approx. 224 kW Main power supply: 416 VAC / 50 Hz / 3-phase Control power: 110 VAC Application: secondary shredding/grinding of pre-shredded tires and rubber Suitable for further size reduction and preparation of material for granulation The machine was previously part of a complete tire recycling line Location: Poland, near Poznań The machine can be sold separately or together with other equipment from the complete tire recycling line. More photos and technical information are available upon request. Inspection can be arranged.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Main pump connections: Suction nozzle DN 125 / PN16 Discharge nozzle DN 100 / PN16 Fgedpsz I R Rksfx Al Ujh

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Fgodpfx Alsztzi Ro Ush Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Fgodpfx Alotdnnmj Uoh

Condition: ready for operation (used), Peddinghaus Model 210 Super 16 / Profile Steel Shear - COMPLETE TECHNICAL DATA, SEE PHOTO - Punching force 860 - 900 KN (86-90 tons) - Punching capacity max. 31mm / 20mm thickness - Reach approx. 510mm - Punching stroke max. 29mm - Stroke rate 40-45 strokes / minute Material capacity (shearing & notching) - Round steel up to max. 50mm - Square steel 40x40mm - Angle iron (L-profile) 140x140x13mm - Notching (I & T steel up to 80x14mm) - Drive power 4 KW - WITH PUNCHING TOOLS & Punches & Spare blades Fodpfx Aoz Dq Tkel Uogh - Foot switch - DOCUMENTATION Dimensions: L x W x H 2.1 x 0.8 x 2.2 meters / Weight 3700KG Subject to errors / typographical errors

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,500 mm, total height: 5,600 mm, total width: 4,400 mm, total length: 3,900 mm, rotary table diameter: 1,250 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 315 rpm, table diameter: 1,250 mm, year of last overhaul: 2016, Equipment: documentation/manual, Berthiez TFM 125 Vertical boring and turningmill with toolholder changiging device The machine its from 1978 but has been retroifit in 2016 with new Siemens Sinumerk 840D solutionsline This is an high presition vertcal turningmachine with grinding device. Fsdpfxszvydls Al Usgh Lots of tools its following the machine. The machine its in very good condition! Diameter of table 1250mm Max turningdiameter 1500mm Max turninghigh 1000mm Table high 670mm Max turning table speed 315rpm Spindle 39KW Scale on both axis

Condition: ready for operation (used), overall weight: 1,780 kg, load capacity: 125 kg, arm reach: 3,200 mm, ABB IRB 6600-125/3.2 Type B M2004 Robot Load capacity: 125 kg Reach: 3200 mm Footprint: approx. 1,136 × 850 mm Path repeatability: approx. ±0.3 mm Positional repeatability: ±0.1 mm Axes: 6 Weight: 1780 kg Year of manufacture: 2007 You are welcome to visit us for an inspection. Fedpfx Aszz Hqcel Usgh We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2014, 511 USED W&P Matador MDE 125 electric baking oven. IMPORTANT: The baking chambers are lined with ceramic on the top. Each baking chamber can have a different baking temperature. INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - W: 120 Fedjzuggdjpfx Al Uegh - L: 200 TECHNICAL DATA: - year of production: 2014 - baking area: 12 m² Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 11460000643, functionality: fully functional, operating hours: 35,319 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 10,000 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 125 P duoBLOCK, year of manufacture: 2006, operating hours (h): 35,319, serial no.: 11460000643, travels (X/Y/Z): 1,250/1,000/1,000 mm, spindle speed max. 10,000 rpm, 60-fold tool changer, B-axis, 190° swivel, HEIDENHAIN Mill Plus control, internal coolant supply, tool measuring system, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Fjdpferkz Tfjx Al Uogh

Condition: used, functionality: fully functional, Year of construction: 1989, Working width: 6.0 m Fodpfx Alezu Ilzj Uegh Bending capacity: 1.25 mm steel Year of manufacture: 1989 Condition: Good Includes motorized slitting shear Includes digital control system (retrofitted)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,592 h, power: 58 kW (78.86 HP), lifting height: 40,150 mm, fuel type: diesel, Equipment: all wheel drive, GENIE S-125 telescopic boom lift with a working height of 40.15 meters! Year of manufacture: 2011 According to the meter reading: 5,592 hours 🏗️ Performance data & working range • Max. working height: 40.15 m • Max. platform height: 38.15 m • Max. lateral reach: 24.38 m • Max. reach below ground level: 3.27 m • Platform load capacity: 227 kg (unrestricted) Fsdpoz Ndycjfx Al Ujgh • Turret rotation: 360° continuous • Length of the boom (Jib): approx. 1.52 m 📐 Dimensions & weight • Operating weight: approx. 20,248 kg • Transport length: approx. 12.19 m (with retracted boom for transport) • Transport width (axles retracted): approx. 2.49 m • Working width (axles extended): approx. 3.35 m • Transport height: approx. 3.07 m • Platform size: 2.44 m x 0.91 m ⚙️ Drive & chassis • Engine options (diesel): Deutz TD 2011 L04i (74 hp / 55 kW) or Perkins 804D-33T (83 hp / 62 kW) • Fuel tank capacity: 151 liters • Hydraulic oil tank capacity: 208 liters • Drive / steering: 4WD (all-wheel drive) & 4WS (all-wheel steering with crab steering) • Gradeability: 40% • Tires: Foam-filled rough terrain tires - Ready for immediate use in original condition! - Good tires! - Well-maintained machine! - Includes CE certification! - On request: new Austrian inspection certificate provided before delivery! Selling price: 28,900.00 EUR net Delivery possible!

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Fjdpfsxwqk Eox Al Uegh Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: excellent (used), functionality: fully functional, Infinitely variable speed: 150 – 2000 rpm Spindle taper: ISO 30 Feed on X-axis, infinitely variable: 15 – 250 mm/min Fsdpfxsz Ilibj Al Uegh Travels: X = 280 mm, Y = 170 mm, Z = 250 mm • Universal swivel and tilting table

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: P-000003, Zum Verkauf steht ein professionelles industrielles Hochdrucksystem ECOROLL HGL3.01, Baujahr 2015, hergestellt von ECOROLL AG Werkzeugtechnik, Celle, Deutschland. Die Anlage verfügt über ein integriertes Hochdruck-Speichersystem, eine Siemens SIMATIC Steuerung, Drucküberwachung, Hochdruckarmaturen sowie ein Bedienpanel. Die Anlage wurde vor dem Verkauf angeschlossen und auf Funktion geprüft. Sie lässt sich ordnungsgemäß starten, die Steuerung funktioniert und das System baut Druck auf. Verkauft wird die komplette, auf den aktuellen Fotos dargestellte Anlage. TECHNISCHE DATEN Hersteller: ECOROLL AG Werkzeugtechnik, Celle, Deutschland Typ: HGL3.01 Baujahr: 2015 Seriennummer: P-000003 Max. zulässiger Druck (PS): 300 / 245 bar Leistung: 5,5 kW Spannung: 400 / 690 V Frequenz: 50 Hz Eigengewicht: 786 kg Zulässiger Temperaturbereich: +5 bis +45 °C Kennzeichnung: CE 0045 HOCHDRUCK-SPEICHERSYSTEM Die Anlage ist mit Hochdruckbehältern der Firma Hochdrucktechnik Leimpek ausgestattet. Technische Daten laut Typenschild: Betriebsdruck PS: 300 bar Prüfdruck PT: 450 bar Volumen: 150 Liter CE-Kennzeichnung: 1637 STEUERUNG UND AUSSTATTUNG Fjdpfxjzv Rmde Al Usgh * Siemens SIMATIC Bedienpanel * drei Manometer zur Drucküberwachung: Speicherdruck, Systemdruck und Primärdruck * Not-Aus * Hauptschalter * Kompressorsteuerung * Steuerung der Hochdruckventile * Hochdruckarmaturen * Rohrleitungen und Verbindungsschläuche * integriertes Druckspeichersystem TECHNISCHER ZUSTAND Die Anlage ist funktionsfähig und wurde vor dem Verkauf getestet. Das System wurde angeschlossen und in Betrieb genommen. Bedienpanel und Steuerung funktionieren ordnungsgemäß. Die Anlage lässt sich problemlos starten und baut Druck auf. Der optische Zustand entspricht den aktuellen Fotos. Normale, dem Alter und industriellen Einsatz entsprechende Gebrauchsspuren. Eine Besichtigung der Anlage ist nach vorheriger Terminvereinbarung möglich. PREIS: 12.900 € netto – Verhandlungsbasis Gewicht: 786 kg. Abholung und Organisation des Transports können mit dem Käufer abgestimmt werden. Bei Interesse können weitere Detailaufnahmen der Anlage und der Typenschilder zur Verfügung gestellt werden. Anlage sofort verfügbar.

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 4 mm, SOMO SHEARING MACHINE 4050 X 4 MODEL: SC 40/4 MOTORIZED GAUGE GULLET: 500 Fsdpfxszz Siws Al Ujgh HYDRAULIC PRE-CLAMPING DEVICES INSPECTED USED MACHINE, IN WORKING CONDITION INTERNAL CODE: SVR 439

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet Fgodpox A T Evofx Al Ueh - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, functionality: fully functional, We are selling this machine. It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Largest turning diameter: 12,500 mm Turning height: 2,200 mm Fgjdpfxoydqfde Al Ujh The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer.

Year of construction: 2012, condition: reconditioned (used), functionality: fully functional, CALENDER SUITABLE FOR CONTINUOUS FABRICS: • Transfer printing. • Reactivation of direct inks. • Heat setting. • HEATED CYLINDER DIAMETER: 200 mm • HEATED CYLINDER WIDTH: 2000 mm • Working width: 1,850 mm • Total width: 3300 mm • Total length: 2300 mm • Total height: 2100 mm Fodpfx Aljz Dh Tbj Usgh

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Fgsdpfoz Arhiox Al Ujh Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Fjdpezxufvefx Al Usgh Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. If you have any questions about the machine, please do not hesitate to contact us.

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines DAW 80F RC, year of manufacture 2003, Fjdpfx Alez Hkg As Uogh DAW 125 S DV, year of manufacture 1999, DAW 125 F, year of manufacture 2007.

Condition: excellent (used), 1. D’Andrea Planing and Turning Tool Set Type: Testarossa TRM 125 Mount: SK 50 Fgedpjz Dufwofx Al Uoh D’Andrea BPS 200 – Adjustment range / Ø 200–300 mm D’Andrea SSQC 90 – Tool/slide element D’Andrea P 04.40 – Tool holder Various extensions or turning bars Additional tool/turning head – with insertable cutting blade Complete accessory set – in a plastic case