Used Airtower 26 for sale (6,081)

Condition: used, mileage: 214,681 km, power: 80 kW (108.77 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 630 kg, maximum load weight: 2,870 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,250 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Equipment: airbag, central locking, electronic stability program (ESP), Performance/Engine: 1,968 cm³, 4-cylinder, with turbocharger Axles: 4x2 Brakes: Disc brakes Cab: Tinted windows, electric windows, electric exterior mirrors, audio system Refrigerated Body: Deep-freeze, 1 right-hand side door, 2 rear doors, fixed partition wall Refrigeration Unit: Carrier 350 MT Multi-Temp with 2 evaporators, compressor/electric power, cooling down to -20°C Other Equipment: Power steering, immobilizer Registration / Documents: Previously registered in Germany, Emissions sticker 4 (green), emissions test valid until 12/2026 For sale on behalf of customer Tel: Location: Postcode 89 ID: 117321 Panel van Refrigeration unit Carrier Xarios 350 MT Front and rear stabilizers 6-speed manual transmission 4-cylinder 2.0l diesel engine Long wheelbase Partition wall Bi-Temp -20°C 3.5 tonner Central locking with remote control Driver airbag Right sliding door, special edition Hinges for rear doors with extended opening angle Emissions standard EU5 plus Video: We always have a large selection of used cooling and deep-freeze vehicles in stock. More offers can be found at Non-binding offer, sale on behalf of customer, errors and sale reserved Advertisements and company logos on vehicles may have been digitally edited in the photos. Ihsdpfxjx Enuye Abrou

Condition: new, - NEW -without side panel and without base frameKanuk® OriginalHot-air stove- combustion chamber opening H x W (cm): 90 / 64- Flue pipe connection:top / rear- Efficiency (%): 85,2- Log length (cm): 55- Minimum flue draught (Pa): 16- Ash box: No- BimSchV stage 2: Yes- Brown coal briquette: No- CE mark: Yes- Total output (kW): 26- Room heating capacity (m³): 1000- Window (cm): 34,5 x 22- Weight (kg): 193- Wood consumption (kg/h): 6,5- Exhaust gas throttle flap: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 120 mm- Dimensions H x W x D (cm): 90 / 64 / 110- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 229- Exhaust gas mass flow (g/s): 18.5- Combustion chamber H x W x D (cm): 50 x 55 x 55- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100109 Iedpfx Abevwfz Ajrehu

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Iodpfx Aevyupzebrehu

Condition: excellent (used), functionality: fully functional, mileage: 520,000 km, power: 425 kW (577.84 HP), first registration: 12/2017, fuel type: diesel, empty load weight: 10,500 kg, tire size: 315/80/22.5, tire condition: 50 %, axle configuration: 6x4, wheelbase: 4,900 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, suspension: air, number of seats: 2, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, airbag, car registration, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, non-smoking vehicle, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, traction control, trailer coupling, truck registration, 1st hand, top-maintained, Doll superstructure, aluminium floor, platform 6.40m, Epsilon 120/96 crane, crane base with column renewed 2 years ago, engine fully overhauled – sleeves, pistons, new clutch, air-air suspension, hot water heating, stationary air conditioning, maintenance contract with Mercedes until 2024. For any questions, contact Tilo Meissner. Isdpfx Aboydn Ipjrehu

Condition: good (used), mileage: 623,000 km, fuel type: diesel, Year of construction: 2019, Scania S450 NGS 6X2 Machine Transporter / Low Loader Truck Euro 6 Automatic – Full Air Suspension – 2019 Steering axle Lift axle MOT valid until 11-26 Load bed dimensions. Length: 885 cm Width: 255 cm Load floor height: 110 cm Payload: 14,300 kg Financial lease? Ask about the options. Video can be provided via WhatsApp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a changing inventory of machinery, trucks, trailers, and attachments. All deliveries are at trade prices, in AS-IS condition, without warranty. (see our general terms and conditions) Ihedox Hr Iyjpfx Abreu For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2016, operating hours: 20,256 h, machine/vehicle number: API831057, Lg.No. 25372 Technical Data: Isdpfjycvtwox Abrehu - Operating hours: 20,256 h - Operating pressure: 13 bar - Delivery rate: 4.09 m³/min - Drive: 400 V / 26 kW - Motor speed: 3,000 rpm - Required space approx.: W 900 x H 1,750 x D 900 mm - Weight approx.: 490 kg

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Ihodpodqzbnjfx Abreu Guaranteed concentricity

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Ijdpfx Aodqzh Tsbrjhu Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-way HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - circumference 2.600 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 100 / 79 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 900 mm saw blade tilt 90° -45° - Dressing - working width 410 mm planing table length 1.660 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 410 x 605 mm min./max. working height 3 / 230 mm max. chip intake 4 mm Ihodpfx Aod Dtc Tobreu feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool Ø 210 mm spindle speed 3.500 / 6.000 / 10.000 rpm spindle Ø 30 mm - General - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines Ihodpfswc Aqwjx Abreu TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: new, functionality: fully functional, 4 pcs. roughing end mills, DIN 844, nominal diameter Ø 26 mm, shank Ø 25 mm, number of flutes 6, cutting length 45 mm, overall length 122 mm 9 pcs. finishing end mills, DIN 844, nominal diameter Ø 28 mm, shank Ø 25 mm, number of flutes 6, cutting length 45 mm, overall length 120 mm Ihodoxyw Uvepfx Abrsu

Condition: used, mileage: 48,677 km, power: 130 kW (176.75 HP), first registration: 01/2011, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Equipment: ABS, crane, electronic stability program (ESP), parking heater, Nissan Cabster 35.13 PALFINGER Steiger 26 meters 4x2 Iodpfxopvli Ss Abrshu Suspension: spring / leaf Wheelbase: 2.95 m PALFINGER Steiger Type: P 260 B Year of manufacture 2011 4x hydraulic extension 4x hydraulic support points 1x work basket (1.40 m x 0.70 m x 1.10 m) Equipment: - Electric window lifter - Auxiliary heating We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Condition: new, mileage: 283 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Air conditioning * Cool box Ihsdpfsxw Duksx Abrsu * Height- and tilt-adjustable steering wheel * Axle configuration: 6x6 * Differential locks on driven rear axles * Differential locks on driven front axles * MAN TipMatic 12.28 OD * HYVA hooklift system * Rockinger towing coupling -----Internal vehicle number: 11533----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, DGUV certified until: 12/2026, type of input current: AC, input frequency: 50 Hz, BS Series Pretzel and Bun Slicing Machine Schickart Model: BS 26 Tabletop machine Isdpfjqy A Tijx Abrehu for slicing across or lengthwise Stainless steel construction DGUV V3 tested exclusively by us Connection: 220 V Used machine, cleaned More top slicing machines in stock!

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece Ihodpfxjb A I Uls Abrou

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Ihsdpfxjf S Hh Tj Abrsu Assembly time - 8 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: good (used), Pharyngeal theory, border pharyngeal theory, double-mouthed Ihedsdyk Dcspfx Abrju -Throat study including: good and reject sides -Measuring range: 3/4/5/6/7/8/9/10/12/14/15/25/53 mm -various manufacturers -List: in the photos -Sale: only complete set -Weight: 4.9 kg

Condition: excellent (used), MANUFACTURER: ATLASCOPCO MODEL: GA26 P S/N: API320780 YEAR: 2012 POWER (kW): 26 CAPACITY (m3/min): 4.16 PRESSURE (bar): 10 Iodsya Dudjpfx Abrjhu

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Ihedpfx Aou R S Dhobreu Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Iodpfoxlt Shjx Abrehu Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: ready for operation (used), NUM FC 939970-B 939 970 B 26 electronic module,used, normal traces of use, 100% functional, scope of delivery according to photos Ihsdpfx Aji Eb U Usbreu

Condition: ready for operation (used), NUM FS 200504B 200 506 A 26 Alimentation / power supply, used, normal signs of use, 100% functional, scope of delivery as per photos Ihsdpfji Eb U Hex Abrsu

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Iedpoutz Uyjfx Abrohu Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Iodpfx Asb A R N Rjbrshu -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 26 mm -offset: 7 mm -Number: 4 drill heads available -Price: per piece -Dimensions: 85/70/H120 mm -Weight: 4 kg

Condition: used, mileage: 248,000 km, power: 110 kW (149.56 HP), first registration: 06/2006, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro2, number of seats: 2, Equipment: ABS, * Mercedes Benz 815 Atego chassis with trailer coupling and large cross member for Rockinger * Diesel – Displacement: 4,249 cc – 110 kW / 150 hp – Euro 2 – Red badge – TÜV valid until 10/2026 * Wheelbase: 3,000 mm – 2 seats – 6-speed manual gearbox – Auxiliary heater – Swivel ball coupling for trailers up to 3.5 t Ihedpfxsxuypxs Abrju * Permissible total weight: 7,490 kg – Large cross member for Rockinger coupling * Vehicle available immediately and ready for collection – Vehicle is unbranded * Please arrange an appointment for viewing * Contact person: Mr. Andreas Vogel * The specifications provided online are non-binding descriptions. * They do not constitute guaranteed characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to change, error, and prior sale.