Cnc multispindle lathe

TORNOS MULTIDECO 26/6

Condition: used, Year of construction: 2000, Tornos MultiDeco 26/6 CNC Multispindle Lathe with Fanuc Control (2000), S/No. T62338, Iemca Bar Loader SIR 32/P 38 S/No. 99022604, (1999), Pick Off Attachment, Filtration Unit ACS 1000, Swarf Conveyor, Selection of Toolholders/Collets, Machine Operator/Maintenance/Programming Manuals. Country of Origin: Switzerland Location: These lots are located in Yeovil, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fsdpfxjxuf Ums Ah Ujgi

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW Fgsdpfsw Tm R Usx Ah Usi tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm workpiece weight 200 kg total power requirement 17,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door. Machine can be inspected under power.

Condition: good (used), Year of construction: 2000, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T 63504, year of manufacture 2000, FANUC control, chip conveyor, together with bar loader TORNOS Robobar MSF 832, No. C-15040, year of manufacture 2000 Fgedpfxeunvv Is Ah Usi

Condition: ready for operation (used), Year of construction: 2004, operating hours: 35,324 h, Control Unit Brand FANUC Main Drive Spindle speed range 8000 Spindle motor power 11–15 kW Number of axis 10 Fgjdpfx Ahewzzqgj Usi Additional Equipment Cooling System: Oil or emulsion Chip Conveyor: Optional This 10-axis Tornos-Bechler MultiDeco 26-6 was manufactured in 2004. It features a maximum bar diameter of 20 mm, spindle speeds up to 8,000 rpm, and a main spindle motor power of approximately 11-15 kW. It includes multiple front and rear tool stations and an optional chip conveyor. If you are looking to get high-quality turning capabilities, consider the Tornos-Bechler MultiDeco 26-6 machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Fgodpfx Ahowlvi Es Usi Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: used, Year of construction: 2000, Tornos MultiDeco 26/6 CNC Multispindle Lathe with Fanuc Control (2000), S/No. T62338, Iemca Bar Loader SIR 32/P 38 S/No. 99022604, (1999), Pick Off Attachment, Filtration Unit ACS 1000, Swarf Conveyor, Selection of Toolholders/Collets, Machine Operator/Maintenance/Programming Manuals. Country of Origin: Switzerland Location: These lots are located in Yeovil, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fedpfx Aoxt Ihaoh Uegi

Condition: good (used), Year of construction: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar loader IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Fedpjunvwlofx Ah Usgi

Condition: used, X AXIS TRAVEL 2500 MM Y AXIS TRAVEL 1600 (COLUMN ) MM Z AXIS TRAVEL 1500 (VERTICAL) mm TABLE 2700 X 1100 MM MAX WORKPIECE LOAD 10000 KG SPINDLE RPM MAX 6000 RPM SPINDLE POWER 28 KW ISO 50 DIN 69871 CNC HEIDENHAIN TNC 426 ATC 20 PLACES AUTOMATIC HEAD 2,5°x3° Fgedpfx Aetv H Ayoh Uji

Condition: ready for operation (used), Year of construction: 2000, operating hours: 64,409 h, Control Unit Fsdpfx Ahowzn A Ae Usgi Brand FANUC Main Drive Number of spindles 6 Spindle speed range 8000 Spindle motor power 18 kW Number of axis 10 Additional Equipment Back-working Capabilities: Yes This 10-axis Tornos-Bechler MultiDeco 26-6 was manufactured in 2000, featuring a max bar diameter of 26 mm and part length up to 120 mm per clamping. It operates with spindle speeds up to 8,000 rpm and a main spindle drive power of 18 kW. Consider the opportunity to buy this Tornos-Bechler MultiDeco 26-6 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 Fgsdspaiaijpfx Ah Usi - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg