Used Alligator Shear for sale (1,547)

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Bwsdpfx Afji Duh Ietsi Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Guillotine Shear LOTZE Type HSS 20 / 7 Machine no.: Year of manufacture: 1957 Cutting length: 2050 mm Cutting thickness: 7 mm Back gauge: 450 mm (adjustment range) Working height: approx. 800 mm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with handwheel adjustment and mechanical position indicator - Gauge adjustment via trapezoidal threaded spindles - Mechanical sheet holder Bsdpolmry Eofx Aftewi - Simple left angle stop 680 mm - Two front table extensions 650 mm - Mechanical foot switch Space requirement without front table extension (L x W x H): 3040 x 1700 x 1740 mm Space requirement with front table extension (L x W x H): 3040 x 2350 x 1740 mm Weight: approx. 6 t

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Bodpfxeifu Anj Aftswi Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition Bwedpfxjlpkcnj Aftoi

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades Bwjdperzfh Hsfx Aftoi - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION Bedpfxoynngge Aftswi angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 49500 € 945.45 € 60 to 500 mm 5 40x11 mm 32 mm 350x15 mm 120x10 mm 45/40 mm 150x10 mm 5.5 kW 1950 mm 2000 mm Bedpsynnb Rsfx Aftjwi 1900 mm 1900 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH Semipaxy:Increased repeat accuracy instead of time consuming laying out ·including B&R 15" CNC with touchscreenand integrated keyboard ·automatic positioning in x- and y axis ·manual feed of sheet to the stop ·simple grafic programming by touchscreen ·working area 1.000 x 400 mm ·direct importing of DXF files possible

Condition: used, Year of construction: 2004, gebraucht 2004 9726 prompt, Zwischenverkauf v Türkei 6750 € 1 1350 mm 3 mm 35 1/min 1.5 ° 550 mm 3 kW 2 Stk. 850 mm 400 mm 1700 mm Bodeynmyrepfx Aftowi 1350 mm 1200 mm 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 24700 € 474.24 € 1000 mm 400 mm 12 m/min 0,2 mm 0,1 mm 300 kg The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat. THE ASSEMBLY CONSISTS OF: * Mounting plate. * Table assembly with “X” and “Y” axis driven by servo motors. * B&R Power Panel 500 PC based 15” touch screen control * Each axis “X” and “Y” has servo motors with built encoder for precise measurement. * Electric cabinet THE WORK PROCESS IS AS FOLLOWS: * The position of the holes to be punched is programmed either in absolute or incremental dimensions. * When the control is started up, the guide stops are positioned for first hole. * The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles. * After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position. * Repeat this sequence until all holes are punched. B&R PC BASED 15” TOUCH SCREEN CONTROL MAIN FEATURES: * * B&R Power Panel 500 * Integrated keyboard * Windows embedded operating system * 15” colour touch screen WXGA resolution * Compact Flash Memory. * USB front port * Ethernet port * Easy and user friendly interface * Programming is made through Line Pro software developed by Geka * Importing of dxf/dstv files * Network connectivity * Remote assistance via the internet Bwedoynmrhspfx Aftsi * Run, design, jog, configuration and alarm modes ELECTRIC CABINET * Electric cabinet containing power and control equipment for the axis positioning and control of the machine * Includes Allen-Bradley Guarmaster® safety relays * Electric cabinet is mounted inside Hydracrop’s or Puma’s frame. If machine is retrofitted, the electric cabinet is mounted out of the machine’s frame. * Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know LINE PRO MAIN FEATURES: * It is a visual and a very easy to use application with graphic representations. * It shows the operator the image of the piece that is being designed. * All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control. * Importing of dxf and dstv files available according to designing specifications of the software. * It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part. * Line Pro can be installed in a PC for later on sending the file via the network or with a USB stick to the machine * Other X- and Y- ranges are also available, please ask for an offer.

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 35600 € 679.96 € 110 to 610 mm 5 40/20 bzw. 28/28 mm 80 mm Bsdpfxjynmrbe Aftewi 28 1/min 600x15 / 400x20 mm 152x152x13 mm 50 mm 13x52x90 mm 9 kW 2690 mm 1400 mm 2200 mm 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 72800 € 1375.92 € 165 to 610 mm 5 40/30 bzw. 34/34 mm 110 mm 31 1/min 750x20 / 400x30 mm 205x205x18 mm 60 mm 16x58x110 mm 15 kW 2950 mm 1600 mm 2200 mm 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit Bodpfjynmq Rex Aftewi punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION "KIT" € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 165 series: model S € 55.200,-- as model SD but 510 mm gap weight 5.200 kg (sample photos) WE HAVE MORE THAN 700 REFERENCES!

Condition: good (used), Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H Bjdpfxeykz Rke Aftowi -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front Bodpfx Ajxabvqoftjwi - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück Bwsdpfx Afjxaaghjtoi cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: good (used), Year of construction: 1990, sheet width 1650 mm Bwsdoyh Rp Ujpfx Aftsi plate thickness 3 mm cutting thickness max. 3 mm cutting length 1650 mm voltage 380 V weight of the machine ca. 0,5 t dimensions of the machine ca. LBH 2,6 x 1,6 x 1,3 m Well-maintained pneumatic/mechanical guillotine shear with foot switch

Condition: excellent (used), functionality: fully functional, working width: 3,070 mm, sheet thickness (max.): 6 mm, Equipment: CE marking, Used EDWARDS PEARSON Model VE – 3000mm x 6mm guillotine for sale Hydraulic Guillotine Shear for sale Type 04 Capacity: 6.5mm x 3070mm Including Programmable front operated powered back gauge. Bsdpfoyna Rqox Aftowi Front Supports & Squaring Arm. 3metre x 6mm guillotine

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 Bedsv D Nzyjpfx Aftowi See condition

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, LVD Shear Type HSL 40/12.7 Capacity 4x12 mm Year 1991 Weight 14,000 kg Bjdpfx Aoykk Aceftswi

Condition: used, Year of construction: 2018, sheet width 4050 mm plate thickness 20 mm distance between columns 4100 mm column daylight 4200 mm no. of strokes 10-20 Hub/min working pressure 250 bar total power requirement 85 kW weight of the machine ca. 43,6 t dimensions of the machine ca. 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- Bjdpfeyqvchox Aftswi binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, sheet width 4000 mm plate thickness 6 mm distance between columns 4100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bwodoyqt E Hjpfx Aftsi We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Hera Model: TK 3000 x 6 Year of manufacture: 1997 Max. cutting length: 3050 mm Max. sheet thickness (ST 45): 6.0 mm Distance between uprights: 3050 mm Back gauge travel: 0 – 1000 mm Hold-downs: 18 pcs Cutting angle: 1 – 2.5 degrees Motor power: 11 kW Machine weight: 6200 kg Required space: width 4000 mm, depth 2300 mm, height 1850 mm Foot switch Angle gauge Front support arms Motorized back gauge Cutting edge illumination The machine is in very well-maintained condition and ready for immediate use Forklift available, free loading onto truck Affordable shipping available Machine location: 48477 Hörstel Bodpfoyq Nm Tox Aftewi

Condition: used, functionality: fully functional, Year of construction: 1989, 2 Used Sheet Metal Processing Machines for Sale (COLGAR Press Brake + GATTI Guillotine Shear) – Florence Area / Italy For sale due to inventory liquidation from an estate near Florence (Italy): 1) COLGAR Press Brake 2) GATTI Guillotine Shear (3,000 mm) Both machines are connected to the mains and can be inspected on site. 1) COLGAR Press Brake Manufacturer: Officine COLGAR (Italy) Machine type: Press Brake / Pressa Piegatrice Model: P 328/30 Serial number: 2462 Technical specifications (according to nameplate / documents): - Press force: 32,000 kp (approx. 32 t) - Working length / usable length: 3,050 mm - Distance between uprights: 2,850 mm - Throat depth: 210 mm - Stroke: 60 mm - Max. distance table–ram: 280 mm - Table width: 155 mm - Ram adjustment: 80 mm - Main motor: 2.95 kW - Ram adjustment motor: 1.1 kW - Weight: approx. 4,800 kg Special features: - Original manual / documentation available - Heavy-duty, classic industrial design 2) GATTI Guillotine Shear Manufacturer: GATTI Machine type: Guillotine Shear / Plate Shear Working length: 3,000 mm Visible equipment / features: - Control panel with: - Main switch / machine switch - Cycle mode selection Single / Continuous - Start (Marcia) - Stop (Arresto) - Emergency Stop - Classic industrial design - Lateral drive unit present - Working table / support table present Condition (both machines) Machines show wear and signs of use appropriate to their age and operational history. Nevertheless, they are in functional condition and suitable for their intended purpose. Both machines are electrically connected. Inspection by appointment is possible. Bwjdpfxjym Eabs Aftoi Location / Sale: Florence area, Dicomano, Italy - Sale: ex works / EXW - Inspection: by appointment - Loading/transport: by buyer or as agreed Note: Information is provided to the best of our knowledge based on available photos/documents. Subject to prior sale, errors, and changes.

Year of construction: 1998, condition: ready for operation (used), Immediately available ex location: Hydraulic guillotine shear Hera Type TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorized backgauge Backgauge electronically controlled, 1000 mm Machine control Siemens Simatic CP 7 Cutting length 3050 mm Material thickness up to 10 mm Drive power 15 kW Weight 8 t Price: 8,750.— EUR plus VAT ex location. Bjdpfxeyq H Afe Aftowi

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Bedpfx Ajwtyqieftowi Equipment • Angle stop • Support arms • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Bsdpfow Naghjx Aftswi Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.