Used Angle Welding for sale (11,738)

Condition: new, Year of construction: 2026, load capacity: 1,200 kg, pivoting range: 120 °, Equipment: foot remote control, 1200 kg load capacity, horizontal welding turntable, CE certified Blsdpek Adikjfx Afxjl 1200 kg load capacity, tilted very robust Complete set Speed continuously adjustable from 0.05 to 0.7 RPM; higher speed available upon request for an additional charge of €250. Turntable diameter: 1200 mm Tilt angle up to 120° Height, horizontal: 870 mm; height, tilted to center: 720 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m

Condition: good (used), functionality: fully functional, Welding positioner, Deuma, 1500 kg load capacity very robust Welding current transmission 600 A Disc diameter 1100 mm Height when tilted to center 900 mm Height in horizontal position 1100 mm Blsdozvvckjpfx Afxsl Length 1500 mm Width 1000 mm Speed continuously adjustable, approximately 0.1 - 1.2 rpm Tilt continuously adjustable up to approximately 120° with hand and foot remote control

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Bodpfjl Dq U Uex Afxell Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Bljdpfxjmk T Rbe Afxjl dimensions: height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Bedpfxsx Th Sue Afxsll Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: as good as new (ex-display), Year of construction: 2016, Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Bledpsk Abhtsfx Afxol Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Blodpfx Afsuf Hx Toxsl Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2024, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Bledpfxszu Tv Ej Afxjl

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Profile height max. 140 mm Stanzhöhe max. 93 mm Bledpfx Ajzrmcmofxol Punching hub: 15 mm Presskraft 45 kN Weight approx. 280 kg

Condition: new, Year of construction: 2026, CORMAK OS1400 Mobile Welding Fume Extractor The CORMAK OS1400 is a mobile welding fume extractor designed to effectively remove welding fumes and exhaust gases directly at the source. It combines high suction pressure with a high airflow rate, while its sound-insulated fan chamber ensures quiet and comfortable operation. Additional advantages include an integrated pneumatic filter cleaning system, adjustable airflow at the suction inlet, and a robust industrial-grade construction. A Healthier and Safer Working Environment Welding fumes are more than just unpleasant odors and reduced visibility. They consist of extremely fine particles and hazardous compounds that can quickly deteriorate working conditions in enclosed workshops and production halls. The OS1400 is designed to capture welding fumes and exhaust gases at their source before they spread throughout the workstation and the entire facility. This provides operators with a cleaner working environment while helping companies maintain workplace safety standards and keep production areas clean and organized. High Performance for Demanding Applications One of the key advantages of the OS1400 is the combination of high suction pressure and high airflow (1,500 m³/h). In practice, this ensures reliable and efficient extraction even during intensive welding operations with heavy fume generation, such as: continuous welding, welding thick materials, long weld passes. Its high extraction capacity helps prevent fumes from escaping into the surrounding work area, improves visibility, and enhances both welding quality and operator comfort. Quiet Operation for Greater Workplace Comfort Bljdpfx Afjznt Ihexel Daily usability is further enhanced by the unit's low-noise operation. The OS1400 features a sound-insulated fan chamber that significantly reduces operating noise, allowing the extractor to be positioned close to the welding station. This is especially beneficial in workshops and manufacturing facilities where several welding stations operate simultaneously. Reduced noise levels improve communication between operators, enhance concentration, and contribute to a more comfortable working environment throughout the shift. Automatic Pneumatic Filter Cleaning The CORMAK OS1400 is designed for ease of use and consistently high performance. It is equipped with an automatic pneumatic filter cleaning system that periodically removes accumulated dust from the filter without frequent manual intervention. This provides two major benefits: consistent extraction performance over extended operating periods, reduced maintenance downtime and lower operating costs. In production environments, minimizing unexpected interruptions and maintaining constant extraction efficiency helps improve productivity while ensuring clean working conditions. Adjustable Extraction Performance The unit features adjustable airflow control at the suction inlet, allowing extraction power to be matched to the specific application. Robust Construction and Mobility The OS1400 is designed for everyday industrial use. Its heavy-duty construction withstands demanding workshop and manufacturing environments where equipment is frequently moved, operates for extended periods, and is exposed to intensive daily use. Technical Specifications Model CORMAK OS1400 Airflow 1,500 m³/h Maximum Pressure 2,000 Pa Filter Efficiency 99.9% Motor Power 1.5 kW Power Supply 400 V Weight 80 kg

Year of construction: 2015, condition: used, Power consumption 12,5 KVA Power factor 0,95 rated capacity 10 kW Output current 560 A eff output voltage 1500 V eff In our estimation, the machine is in like-new condition and can be inspected under power by appointment. Bodpjzq Hknsfx Afxsll - Includes various accessories Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2026, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Grey Empty weight: 1.550 kg The price does not include accessories. - Year: 2026 - Documentation available: No - CE certificate present: No - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) - Transport weight [kg]: 1550kg Financial information VAT: The price shown is exclusive of VAT Bljdpfozry Rdsx Afxel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Bljdpfxeh N Sd Ue Afxol Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Bjdpfxsw Hw Dgo Afxoll

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Bodpfx Aezxr N Sjfxsll

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Bodpfxemck Rye Afxsll Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Bodpordf Acofx Afxoll Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: new, Year of construction: 2025, Spot Welding Machine Type KMP10 CE certified Operated: Pneumatic Required Air Pressure: 4 bar Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: 1.5+1.5mm steel sheet Transformer Construction: Primary winding: Copper wire Secondary winding: Coper flexible foil sheet Core: Silicon steel EI core Bodpeuy U Hqefx Afxoll Electrode Force Adjustable: 150-300 daN Mains Connection: 220V/400V (50Hz) Protection Fuse: 220V-40A / 400V-25A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 300mm Cooling Water Requirement: Water cooling (7L/min) Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 400mm x 800mm x 550mm Weight: 95kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2025, Grid / Mesh Welding Machine Type KMP180 CE certified Operated: Pneumatic Pressure: 4-8 bar Power: 180KVA Welding Capacity(mesh/grid): (4+4mm mild steel) 4 wire same time Water-cooled Transformer Construction: Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Epoxy resin coated transformer Maximum Force: 305-610 daN Input Voltage: 380V/50Hz Protection Fuse: 300A Power Level: %0-99 power adjustable by digital microcontroller Bsdpfx Aouy U Hwjfxoll Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 550mm Cooling: Water cooling (30L/min) Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 4500m x3500mm x 2150mm Weight: 2850Kg

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION Blsdegmiduopfx Afxol FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0.35 m³/h 220 Volt No. 109115732 Year of manufacture 1991 Refrigerant R12 – needs to be refilled. Blodpfxoftbtmo Afxel

Condition: new, Year of construction: 2025, Technical Specifications Bedpsvmyaljfx Afxoll Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Input Voltage: 220V (50Hz) Protection Fuse: 220V / 40A Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Weight: 294Kg

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards Bljdpfx Ajh N Sc Ejfxsl - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Year of construction: 2026, condition: new, SPR type is the most popular and preferred line of our manipulators by customers. By moving the axis of rotation of the arm above the surface of the mounting plate, the weight of the support arm counterbalances the welding element. This technical solution gives a clear advantage over the PX and BE series. It allows for flexible positioning of the welded element (even "upside down"). STANDARD VERSION: Three-phase powered positioner Arm rotation using a hydraulic rotator Table rotation using an electric rotator Height adjustment of the arm using hydraulic cylinder Control of functions on the positioner case Bljdpfx Afenqzrpexsl ADDITIONAL OPTIONS: Wired remote control Wireless remote control Pedal on the table rotation cable Smooth table rotation adjustment Rotation negative clamp (positioner case) Length and shape of the arm Possibility of individual configuration of the positioner Control of functions using a teach pendant

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm Bledpfx Ascl Ttvjfxjl 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg