Welding Table

WMT P-2990 x 1490 EG

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Nsdperah S Hefx Akqjcr Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Nedod Du T Iopfx Akqocr Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, mileage: 21,683 km, power: 397 kW (539.77 HP), first registration: 11/2022, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,060 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, operating hours: 1,332 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, navigation system, parking heater, power assisted steering, seat heater, traction control, = Additional Options and Equipment = - Alarm system - Differential lock - Remote central locking - Refrigerator - LED headlights - Leather interior - Alloy wheels - Air suspension - Hub reduction - PTO (Power Take Off) - Radio - Reversing camera - Disc brakes - Sun visor - Lane departure warning - Auxiliary heater - Central lubrication = Notes = Volvo FH 540 10x4. Full air suspension. Dynamic steering. Alcoa wheels. Work lights. Flash lights. Air horns. Erkin World Power. Model: ER-250.000L 10+7 Scanreco radio remote control. 7 x hydraulic outriggers. Winch. Central lubrication system. 10 x hydraulic extensions on main boom. 5.00 m - 41,000 kg. 6.60 m - 30,500 kg. 8.20 m - 23,000 kg. 10.60 m - 16,250 kg. 12.30 m - 13,100 kg. 14.20 m - 10,600 kg. 16.40 m - 8,700 kg. 18.60 m - 7,110 kg. 20.80 m - 6,130 kg. 23.30 m - 5,220 kg. 25.90 m - 4,500 kg. 1 x manual extension. Fly jib: 7 x hydraulic extensions. Ncjdpfjwlu Sxsx Akqsr 29.50 m - 1,680 kg. 31.40 m - 1,430 kg. 33.40 m - 1,200 kg. 35.10 m - 1,000 kg. 37.40 m - 850 kg. 39.50 m - 700 kg. 41.50 m - 600 kg. 43.50 m - 550 kg. 3 x manual extensions: 45.80 m - 390 kg. 47.80 m - 250 kg. 50.50 m - 200 kg. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Steering axle; Left tire tread: 80%; Right tire tread: 80% Front axle 2: Tire size: 385/65R22.5; Steering axle; Left tire tread: 80%; Right tire tread: 80% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 3: Tire size: 385/65R22.5; Steering axle; Left tire tread: 80%; Right tire tread: 80% Weights Unladen weight: 43,180 kg Payload: 12,820 kg Gross vehicle weight (GVW): 56,000 kg Functional Crane: Erkin World Power Interior Upholstery: Leather Financial Information Price: On request Identification Model number: FH 540 / 10x4 / ERKIN 250.000 / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po russki. We strive to provide accurate information; however, no rights can be derived from the information provided.

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Ncjdpfefbbx Rsx Akqjr Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Ncsdpfx Akshpktvjqjr Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: Ncedpsxab Rnefx Akqjr - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Ncedew R Ranopfx Akqer Colour: Textured paint, RAL 7035 light grey

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Ncodpfx Akjtmugcjqer Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Njdjv T I Evopfx Akqecr Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2329200, functionality: fully functional, operating hours: 33,674 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 11,000 kg, table length: 700 mm, table width: 900 mm, spindle speed (max.): 16,000 rpm, table load: 800 kg, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 80 P duoBLOCK, year of manufacture: 2006, operating hours (h): 33,674, serial no.: 2329200, travel (X/Y/Z): 800/800/800 mm, max. spindle speed 16,000 rpm, HSK 63 tool holder, HEIDENHAIN Mill Plus IT control, G7 function, internal coolant supply, 60-position tool changer, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Nsdpjrkz Rgsfx Akqscr