Used Angle Wolf for sale (70)

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511 Dkjdpfx Asz I Inaep Ieu

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Meat Mincer Düker-Rex AW 98 / 1400 Complete V2A stainless steel construction. In very good condition with sorting device. See photos. Year of manufacture: Würzburg 07 / 2021 Machine is plug-in ready and workshop-tested. Further details upon request. Dkjdpsynkb Hjfx Ap Isu Payment by cash or advance bank transfer. Sale only to commercial buyers. No warranty, no liability.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Dedpfx Aeyt Emnjp Ijku Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Dedswcgr Eopfx Ap Ieku Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. It has few operating hours and is in very good condition! Sold on behalf of a customer! Dksdpfozau Smex Ap Iju - Miter saw - Measuring device - Cut-to-length system - Gripper

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Dkjdjyzcxrepfx Ap Iou

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Epsilon E380 crane. Dsdozwd Dxopfx Ap Ieku Concrete weights will be removed.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition. Dksdpfozyubyex Ap Ieu

Year of construction: 2021, condition: ready for operation (used), The GatheRex™ Cell Harvest Pump is a liquid handling device designed to work with closed system cell culture devices. The GatheRex connects to closed system devices and uses a low pressure forced air mechanism to remove media, concentrate cells and minimize storage and/or downstream processing. An internal air pump pressurizes the system by pumping air through the sterile vent filter on the cell culture device. When pressurized, excess media, or a cell fraction, is forced out of the device through the tubing assembly then into a collection receptacle. Model 80000Z is designated by black ID tags on the tubing pinch clamps. This version is compatible with large diameter tubing (0.375” OD) for media removal and small diameter tubing (0.160” OD blood transfer bag style) for cell recovery. ELECTRICAL REQUIREMENTS 1. Input: 100-240VAC, ~1.3A, 50-60Hz, Single Phase Fuse Type: 5ET 3.15-R, Cartridge, Time Delay, 3.15A, 250 V, 5mm x 20mm (0.2” x 0.79”), 5ET Series Detachable Power Cord: C13, 18AWG, 10A minimum, Grounded (3 Prong), UL 62, CSA-C22.2 No. 49 IEC / UL: 61010-1 edition 3.1 and 61326-1:2012 LOW PRESSURE OUTPUT Dedpfxjz Dx Suo Ap Ijku 1. Gauge Pressure: 120 – 180 mmHg (2.32 – 3.48 psi) No adjustments for altitude are needed. 2. Flow Rate: Minimum 5 mL/sec fluid transfer rate from G-Rex M-CS ENVIRONMENTAL CONDITIONS 1. Temperature: 15°C to 35°C (59-95°F) 2. Humidity: ≤ 95% Relative Humidity 3. Altitude: < 2,000 meters (6,561 feet) Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter Dedjzw Ngxepfx Ap Ioku

Condition: used, Year of construction: 2026, in use with combination 03/08 WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Dkodpfx Apjzv Rd Nj Isu Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soils, trenches, slopes, and backfills in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel have to stand directly in the trench. Important areas of application and functions: Trench construction + utility zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult locations. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: used, Year of construction: 2025, Block cutter BS252 - grit size 0 - 35/40 mm Blocks in the wear zones are welded with armor wire Adapter Oilquick OQ70/55 - not included in the price - available upon request Excavators from 26 t / wheel loaders from 14 t Cutting width 1500 mm / 5 shafts Dksdpez Eg Imsfx Ap Iou Capacity 2.25 m³ Throughput / hour 80 - 122 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clumps. - Aerating, crushing, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments in mm; larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.155 - the bearings are maintenance-free, and the chain housings contain a lubricating grease that, through the movement of the bucket and the running of the chain, provides lubrication at every point. Therefore, the Terra-Star TSP.155 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Dkjdpfxjya Uuzo Ap Iou Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Year of construction: 2023, condition: used, Wolf bucket separator TSP.124 is designed for tough continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free, and the chain casings contain fluid grease, which is distributed to all areas by the movement of the bucket and the running chain, ensuring constant lubrication. Therefore, the Terra-Star never needs to be relubricated and is maintenance-free. Djdpfsyf Aqnjx Ap Ioku The machine is equipped with M80X mixing shafts, and the tools are hardfaced with armored wire in the wear zones. An OQ70/55 adapter is installed, although other adapters can also be mounted. Combined use with excavators and wheel loaders is possible without difficulty. The adapter is not included in the price. For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³ / h Leak oil connection required: 1 Series: TSP.124.096

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Dkjdpfx Ajyit Hbop Iju

Year of construction: 2021, condition: used, The separator was used in the production of flowable fill (liquid soil). Primarily, peat was shredded, which is why cross-discs are installed to ensure effective material size reduction. The PE lining ensures improved material flow. The shafts are suitable for shredding biomass and compost, as well as other soft materials such as bark, etc. The separator is equipped with an adapter compatible with wheel loader systems from Volvo, Cat, and Liebherr, as well as an overflow protection system that prevents debris from spilling over. Dodpfxeyf Ar Ee Ap Ioku We can also equip the separator with different shafts, such as screening shafts or mixing shafts. Please refer to the attached description. Suitable for excavators from 16 t Suitable for wheel loaders from 12 t Weight (kg): 1600 Drain line required: 2 Series: TSC.184.007

Year of construction: 2021, condition: used, We are now selling our exhibition machine Terra-Star Powrline TSP.224. The separator has accompanied us at trade fairs and exhibitions and is currently on its first rental assignment. Equipped with block disc shafts, which are designed for processing cohesive soils, breaking up soil clumps, and mixing in additives such as lime or mixed binders. When all other separators fail, block disc shafts always keep things moving. The separator can be mounted on excavators and wheel loaders. Price is without adapter. We are happy to discuss options and alternatives for your construction site. Dedpfx Ajyf Aqhop Ioku Suitable for excavators from 38 t Suitable for wheel loaders from 20 t Weight in kg: 4100 Throughput: 100-160 m³/h Drain line required: 1 Series: TSP.224.003

Year of construction: 2021, condition: used, machine/vehicle number: TSC.153.028, Wolf bucket separator Terra-Star Compactline TSC.153 continuously impresses customers with its high throughput. The TSC.153 requires only 20 to 30 seconds to process a capacity of 0.95 m³. With 50 fills, this results in well over 45 m³ per hour. The ability to quickly and easily convert the shafts makes the Terra-Star Compactline series unique on the market. The separator is equipped with screening shafts, star discs with a separation gap of 30mm – producing a grain size of 0-35/40 mm. In wear zones, the tools are reinforced with hardfacing wire. Dodpfx Apsw Skvre Ioku Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Leak oil connection required: no

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. Djdpsyf A Erefx Ap Isku For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2025, condition: excellent (used), Separator TSP.155 Dkjdpfx Aoyvrzxsp Iou The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Year of construction: 2025, condition: like new (used), Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus when it is undesirable for larger stones to be present in significant quantities in the screened material. The mixing of compost, sand, or substrate in a supplementary pass while screening with a Terra-Star also works excellently. This way, dirt is turned into new money! Disc spacing: 10 mm. Screen size: 0-15/20 mm. Fitted with an OQ45-5 quick coupler, which can be replaced or purchased for €1,890. For excavators from 6 t For wheel loaders from 4 t Throughput: 18-23 m³/h Leak oil connection required: 2 Series: TSE.103.569 Dkedpfx Apoyfwd Ne Iju

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210 Dodpfxoyfwbzo Ap Ijku

Condition: used, Year of construction: 2018, Screening shafts with square discs, separation distance 40 mm Coarse screening - grain size 0 - 45/50 mm Dedpfx Apszv Rg Re Ieku Wheel loader attachment for Volvo L50-120 included in the price Wheel loader from 15 t Cutting width 2600 mm / 3 shafts Capacity 2.60 m³ Throughput / hour 80 - 140 m³/hour Working pressure 280 - 300 bar Oil requirement 200 - 280 l/min The separator crushes clods of earth and separates stones, roots, and branches from still usable soil. Other shafts can also be installed in the separator at any time, thanks to the patented Wolf shaft couplings; conversion time approx. 40 to 60 minutes. The separator is equipped with an overflow protection to increase the bucket capacity and protect against flying stones. The TSP.263 - the bearings are maintenance-free; the chains should be sprayed with spray grease via the maintenance flaps every 20 operating hours. Dimensions and weight without adapter.

Year of construction: 2025, condition: like new (used), The separator is designed for screening topsoil / humus. Screening and mixing of compost, sand, or other materials can be performed in a single operation with the Terra-Star. The four shafts deliver an impressive throughput when screening and mixing. The shafts are fitted with wear-resistant HX 500 star discs. When wear occurs, the discs can be re-welded at any time. The Terra-Star is a modern, forward-thinking system that already provides the foundation for tomorrow’s adaptability. Switching to other carrier machines is always possible, as all components are bolted. The shafts can also be converted for other applications at any time, for example, from screening shafts to mixing shafts or to any other combination. Required adapters for excavators or wheel loaders are, of course, available upon request directly from us. Price without mounting plate. Mounted is a Lehnhoff quick coupler, which can be retained or purchased separately. Price MS 03: €420 For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Leak oil connection required: 0 Dkjdpfx Ajya Uu Iop Isu Series: TSE.054.104

Year of construction: 2024, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. Mixing compost, sand, substrate, etc. in a single operation during screening is easily possible. Suitable for screening topsoil, construction debris, and gravel. Backfilling of structures and trenches, etc. The unit can also be fitted for other grain sizes or shaft tasks—please inquire. The separator is currently on rental. Upon return, the separator is inspected in our workshop and comes with a 12-month warranty. Currently, an OQ45-5 is mounted, which is not included in the price. For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Dksdpfxeyfwfae Ap Ieu Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.491