Used Arunda Template for sale (122)

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Lodpfsxg Ndiox Agzeak Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Ljdpjvccqxjfx Agzsak Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Product features Superior performance: New TE module with special technique to ensure long service life. Precise temperature control technology ensures temperature flfluctuation of each well lower than 0.1℃. Unique bottom detection, compatible to reaction volume down to 5μl. Combination of precise light path system and super highly-sensitive PMT system ensures super high sensitivity and precision of flfluorescence detection. LED excitation light source of super long service life requires no maintenance. Brand-new automatic hot lid technology, free from manual operation, automatic open and close, effffectively prevent reagent evaporation. 6 channels flfluorescence detection, no crosstalk between difffferent channels. Equipped with whole block scanning and formulated line scanning mode, 96-well double-color scanning takes only 5.5s. Powerful software system: Operation interface in English language, simple to use. Multiple templates, easy to fifind experiments saved, and fast to set up new experiment. (HRM), SNP analysis, relative quantitative and isothermal amplifification. Humanized software with user friendly interface. Laedpsuvdnnofx Agzjk Comprehensive analysis and report function, flflexibly print single and multiple sample reports. Custom gain and auto gain fully satisfy various experiment demand of difffferent users.Various analysis modes: qualitative/absolute quantitative, standard curve, melting curve, high-resolution melting curve. Powerful technical team： BIOER owns over fififteen years’ experience in professional PCR development and technical accumulation. BIOER provides comprehensive pre-sales technical support and after-sales application engineers. It owns professional reagent development team which can provide a full range of reagents independently developed to deal with compatibility of the upstream and downstream reagents, making scientifific research easier. Brand new never used. Please check our other listings as well.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° Laedpouh R R Ejfx Agzsk - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 40 g/m², paper weight (max.): 350 g/m², No Minimum Price – Guaranteed Sale to the Highest Bidder! OVERVIEW - VAC-60Ha and 2x VAC-60Hc Collating Towers - ST-40 Stacker Delivery - ACF-30 Gathering and Folding Unit - SPF-30S Saddle Stitcher - HTS-30 Three-Knife Trimmer TECHNICAL DETAILS Collating Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Suction and Blower Air Collating Tower Number of Stations: 6 Error Prevention: Miss, Double Sheet, and Jam Detection Lodswy U N Tjpfx Agzsak Job Memory: 9 storage spaces for repeat jobs Programs: Double Cycle (Non-stop Operation), Insert Sheets (single and double), Booklet Program, Block Program, Selective Collating Scalability: Up to 6 towers (36 stations) Size Range: max. 148 - 500 × 120 - 350 mm Paper Weight: 40 – 350 g/m² Loading Capacity per Station: 130 mm Production Speed: Up to 9,500 sets/h Power Supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Dual-Side Collating Use: Towers may be used independently Weight per Tower: 310 kg Stitching Line System Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30S + HTS-30 (Gathering & Folding + Saddle Stitcher + Three-Knife Trimmer) Format Setting: Fully Automatic Format Templates: DIN sizes and standard folding patterns Job Memory: 200 storage spaces for repeat jobs Stitching System Stitch Types: Saddle, Block, and Corner Stitching Staple Heads: 2 units (expandable to 4) Loop Stitching: Possible with loop stitching heads Staple Pitch: 60 - 150 mm Stitching Thickness: max. 5 mm (3 mm with loop staples) Processing Feed Size: 120 - 500 × 148 - 350 mm Paper Weight: 40 – 350 g/m² Processing Thickness: 8 – 200 sheets Speed: max. 5,500 cycles/h Trimming Untrimmed Size: 140 - 350 × 103 - 250 mm Trimmed Size: 120 - 312 × 95 - 230 mm Space Requirements and Weight Installation Area: min. 5,709 × 3,240 mm Stitchliner Weight: 2,120 kg Power Supply: 400 V / 50 Hz

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: UNKNOWN NO TEMPLATE. Lsdpfx Agew Tkvujzeak We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm working area mm speed m/min Bar length mm total power requirement 25 kW Lsdpfx Agot Hwtrjzeak weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 – 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 – 140/230 rpm Regulating wheel tilt plus/minus +3 / –5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS – Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W Lsdoxa Ap Eopfx Agzjak • Spindle speed: multiple stages, variable • Condition: used, tested, fully functional

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lajdpfeh Axk Iox Agzek On Stock Emskirchen / Nürnberg - Can be test

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Exhibition machine – as new – including the following options: - Laser cutline indicator - Saw motor with 7.5 kW (10 HP) - Mitre fence swivels +/- 50° with length compensation - Programmable saw blade height adjustment Saw unit swivels up to 46° Pressure beam, including: LED lighting with 3 different action colors: - WHITE: Machine at standstill - RED: Pressure beam lowering or emergency stop function - BLUE: Saw unit in motion Up to 3,400 mm extendable telescopic stop with 2 digital displays 4 parallel, motorized positioning width stops on a 2,000 mm wide support table, size adjustment up to 1,300 mm Automatic stop retraction Versatile support table 800 x 200 mm Scoring system using the main saw blade in synchronised rotation Automatic workpiece length detection for minimum travel distances Mobile, height-adjustable control panel, including: - Touchscreen control panel with cut plan creation - Saw blade stand - Template holder - Emergency stop button, start button, selector switch for grooving/groove sawing/cutting, rotary switch for feed speed Lsdew Uf Nljpfx Agzeak - Switch for laser (option) - USB socket Attention: Machine is supplied without saw blade! Technical data: Cutting length: 3,200 mm Max. saw blade projection: 100 mm at 90°, 72 mm at 45° Saw blade: Diameter 300 – 350 mm, bore 30 mm Saw blade speed: 4,000 rpm Motor: 5 kW (= 7.5 HP) Feed speed: 0 – 40 m/min Overall length: approx. 4,270 mm Weight: from approx. 1,150 to 1,550 kg (depending on equipment) Required air pressure: 7 bar Extraction ports: 1 x 100 mm, 1 x 120 mm

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Lsdswzmvbjpfx Agzsak Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: used, color: other, first registration: 08/2006, Year of construction: 2008, Serial number: NO TEMPLATE We have a stock of >100 axles. Lajdow Tku Djpfx Agzok Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Lodpfx Agst Hwzpjzsak Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one Lodpfsramz Hox Agzsak - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: refurbished (used), Overhauled tensile testing machine model Erichsen 472-500N Force Range: 0-500N Traverse resolution: 0.01mm Test speed: 0.5-500mm/min Ledjndca Rspfx Agzeak Truss stroke: 800mm Installation space width: 205mm Dimensions (HxWxD): 1035 x 340 x 320mm Weight: ca.40kg incl. 200N force transducer Force transducer model 713-200N Measuring Range: 0-200N (Optionally, other force transducers possible) incl. new machine control system Controller board with USB port for PC control via Windows incl. software package PM-Soft-Smart PC control and evaluation software for testing machines, executable on PCs with WINDOWS 10 or 11. The modern and powerful test software enables test sequences and evaluations in accordance with the relevant test standards, as well as the self-design of test templates and evaluations with the integrated test template editor and the protocol generator. Hint: The software offered requires a PC with Windows 10 or 11 and a USB interface. Incl. factory calibration of the force transducer in tension and compression direction with calibration certificate

Condition: ready for operation (used), Year of construction: 1989, Pallet block saw LUDWIG incl. feeding of the blocks to the skid nailing machine Lodpeuzhrpsfx Agzoak Skid nailing machine with automatic feeding of the skids to the skid infeed Skid infeed incl. skid supply conveyor with skid turner and automatic separation, positioning and skid feed Assembly machine with U-template suitable for manual, semi-automatic or fully automatic feeding with automatic narrow / wide travel cycle time for nailing: start - nailing - nailing - nailing - template in starting position approx. 6 seconds Column stacker including various stacking programs, 90° or 180° stacking of pallets possible All nailing machines with central lubrication

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Laodpfx Aowynhpsgzsk Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: used, color: other, first registration: 07/2005, Year of construction: 2004, Serial number: NO TEMPLATE Laedpew Emxkjfx Agzsk We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2024, machine/vehicle number: 2024, STEEL CUTTING MACHINE with ONLINE-PC-STEUERUNG350 fully automatic steel cutting machine for reinforcing steel cutting in a single - or double cut according to requirement. Optimized cutting with residual lengths. The system consists of an automatic Vorlegemagazin with 12 seats, a hacksaw and a belt conveyor to the removal of cut-to-length steel profiles. Rest lengths to promote after length in a rest length basket, transport or waste basket. The steel profiles are processed in the process, while the profile bar is precisely positioned by a transport gripper with linear motor and rotary encoders. The saw cut is made from the top, Microdosier-cooling-lubrication system ensures optimum cooling of the blade. Lodpfscmqkmsx Agzoak The profile is, profile cross section regardless, pneumatically. Free-standing system with PC control or in combination with an automatic cutting machine, plastic-BAZ or SBZ. In a combination of stroke with the automatic cutting machine, BAZ or SBZ is synchronized. Profile lists for the store in the template magazine displays the employee on the TFT screen. The finished steel profiles are taken from the belt conveyor, acknowledged and filed in car, or manually pushed to the Stahlein-schubstation in the PVC profiles. New facility 10 weeks delivery time

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 512 Alüminyum Pvc 3'lü Kol Yeri Delme Makinesi Yüksek Frekans Motorlu, - Complies with CE standards. - Possibility to open lock places, hinge slots, handle holes of PVC profiles - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Universal template, possibility to make optional template - Possibility of triple drilling copy milling or grooving system to work as a single system - Comfortable working thanks to the powerful motor - High frequency motor (18000 rpm) Laodpfsrana Esx Agzsk - Cooling system OPTION - Right conveyor system (1 meter)

Condition: used, color: other, first registration: 07/2000, Year of construction: 2000, Serial number: NO TEMPLATE We have a stock of >100 axles. Lasdewx Nhzepfx Agzek Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2005, Year of construction: 2005, Serial number: NO TEMPLATE Ledpfx Aswx Nd Asgzsak We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/1995, Year of construction: 1995, Serial number: NO TEMPLATE We have a stock of >100 axles. Laedpfowx I Srex Agzok Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template We have a stock of >100 axles. Ledpowx Ixljfx Agzeak Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2008, Year of construction: 2008, Serial number: NO TEMPLATE Lajdpfsucu Tmjx Agzsk We have a stock of >100 axles. Please contact us if you can't find what you are looking for.