Used At 125 Mini for sale (15,485)

Condition: new, Holzkraft minimax st 1g saw-milling combination (5501048) With tiltable saw blade, rigid milling spindle and format sliding carriage made of anodized aluminum. DESCRIPTION - Work table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operation - Unique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precision - Cutting plane directly on the saw blade - Swiveling saw blade from 90° - 45 - Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpieces - Milling protection hood for profiling - Two independent motors for each working unit TECHNICAL DATA Dimensions and weights Weight (net) approx.: 190kg Suction connection Suction port diameter: 120mm Suction port diameter saw blade guard: 60mm Electrical data Supply voltage: 400V Mains frequency: 50Hz Rated operating mode of drive motor: S6 Duty cycle drive motor: 40% Power drive motor: 2 x 1,8kW Sliding carriage and table sliding table length: 1140mm format sliding carriage width: 201mm format sliding carriage height: 70mm table length: 1040mm table width: 224mm Milling spindle spindle mandrel diameter: 30mm useful length of spindle: 75mm spindle speeds: 5000/7500min-¹ Milling tool diameter max. Tool diameter max: 160mm tenon milling tool diameter max: 200mm Circular saw unit trimming length: 1200mm Cutting width with rip fence: 700mm Max. Trimming width to the left of the saw blade: 1200mm Saw blade inclination: 90 - 45°. Max. Cutting height 90°: 75mm Max. Cutting height 45°: 60mm Max. Saw blade projection 90°: 67mm Max. Saw blade projection 45°: 40mm Diameter (main) saw blade: 250mm Speed (main) saw blade: 4000min-¹ Hedpfskzkwuex Agleh Made in Italy Holzkraft dealer - accessories available on request!

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Hsdewkrq Ajpfx Agleh Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: used, mileage: 865,000 km, power: 324 kW (440.52 HP), first registration: 04/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 900 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, MAN TGX 26.440 / 6x2 Platform 6,60 m + CRANE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 865 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 660 x 248 x 90 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 450/135 cm TIRE SIZE: 315/70R22,5 Hedjrczunopfx Agleh SUSPENSION: AIR CRANE: ATLAS 125.2V-A12VB TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Hjdevunxfspfx Agljh Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Hodpfx Agsv Hgctjleh Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 Hjdpolu D Hkjfx Aglsh General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Condition: used, mileage: 345,029 km, power: 265 kW (360.30 HP), first registration: 06/2001, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 6,200 kg, overall weight: 18,000 kg, tire size: 385 / 65 R 22,5, axle configuration: 4x2, wheelbase: 4,500 mm, brakes: constant throttle, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 2,550 mm, total width: 3,700 mm, loading space length: 5,500 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, crane, cruise control, differential lock, fog lights, low noise, trailer coupling, Vehicle location: Bovenden, aluminum body, Kz. House, 1x air seat, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, switch 16, ABS (anti-lock braking system), constant throttle, raised exhaust, lift+lower, differential lock, fog lights, air/leaf suspension, air+light trailer hitch, low-noise G1, stowage box, crane at rear, emergency stop, grab control, high seat, 2-point hydraulic outrigger, environmental badge yellow, 2 hydr, 2x hydr. extensions, yellow environmental sticker Hjdpovhg N Aefx Agljh Wheelbase: 4500 mm Body: ATLAS 125.1 ( emergency stop ) Crane not foldable, stone tongs with rotary servo possible for an extra charge of 1,500 EURO! 300 l tank, load diagram: 5,2m-2,31t, 7,5m-1,51t, 9,9m-1,13t ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2019, condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Hedpswgnglsfx Aglsh

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2025, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable Hodpjwg Etiofx Agleh • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Hjdpfoua Tbwex Aglsh Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Fully functional veneer press from Steinemann model Triumph-60 Plates: 225x125 cm The plates are NEW 4.5 kW water-heated (integrated) 3200 kg Hodpfxsw D Rt Ae Agleh

Condition: new, Year of construction: 2025, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Hedpfx Agsq I Nw Ijloh

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 12 m/min, edge thickness (max.): 10 mm, overall weight: 1,530 kg, rotational speed (max.): 12,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS Panel height: 1,060 mm Maximum edge thickness: 10 mm Minimum panel length: 140 mm Minimum panel width: 85 mm Hedpfx Aoyf Ed Rogleh Feed speed: 12 m/min Sanding Unit Motor power: 2.4 HP Speed: 12,000 rpm Tool diameter: 80 mm Extraction port diameter: 60 mm Gluing Unit Glue pot capacity: 2 kg Glue application roller diameter: 25 mm Pressure roller cutter, large roller diameter: 100 mm Pressure roller cutter, small roller diameter: 80 mm End Trimming Unit Motor power: 1.07 HP Maximum tool diameter: 140 mm Extraction port diameter: 80 mm Milling Unit Motor power: 0.87 HP Tool diameter: 70 mm Extraction port diameter: 80 mm Scraper Unit Extraction port diameter: 60 mm Joint Scraper Unit Extraction port diameter: 60 mm MACHINE DETAILS Compressed air connection: 7 bar Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,000 x 1,600 mm Weight: 1,530 kg EQUIPMENT Electronic control panel with USB port Sintra software Touch probe devices Vertical and front touch probe devices with rotating discs Removable panel support arm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, Hodpfx Aju Ez Huegleh • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: used, Year of construction: 2002, Used machining center from Victor Type: V Center 125 X-axis: 1250 mm Hjdoyfmu Djpfx Agloh Y-axis: 500 mm Z-axis: 600 mm SK 50 taper Table dimensions: 1400 x 550 mm 6000 RPM Coolant through spindle: 15 bar Spindle power: 18.5 kW Tool changer: 32 stations Year of construction: 2002 Transport dimensions: height: 265 cm / depth: 235 cm / length: 450 cm

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Hsdpfx Aoxdltusglsh Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Platters 300cm/125cm Hsdpfx Agsyf Enijlsh divisible into 3 pieces 380V Cold press

Condition: used, Year of construction: 2018, operating hours: 3,025 h, 2018 | Wacker Neuson EZ53 | Used Mini Excavator < 7t | 3025 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 26000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 66 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good overall and operational. 3 buckets. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39895 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Hodoyf Dxtspfx Agljh We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, fuel tank capacity: 128 l, Year of construction: 2018, operating hours: 8,220 h, Year of manufacture: 2018 Field of application: Construction Empty weight: 9.000 kg Hsdoxqfc Nopfx Agloh Dimensions (LxBxH): 699 x 220 x 257 cm Digging depth: 4.4 m

Condition: used, color: gold, Year of construction: 2019, operating hours: 2,230 h, Year of manufacture: 2019 Hsdpfxoxk Tdns Agljh Field of application: Construction Empty weight: 1.500 kg Dimensions (LxBxH): 386 x 98 x 232 cm

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,110 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Hsdexqfb Ejpfx Agleh Digging depth: 4.88 m

Condition: used, lifting height: 5,920 mm, Year of construction: 2023, operating hours: 1,380 h, Equipment: air conditioning, Year of manufacture: 2023 Field of application: Construction Empty weight: 8.500 kg Hodpfx Agjxqfg Ieljh Dimensions (LxBxH): 704 x 220 x 255 cm Digging depth: 4.43 m

Condition: used, lifting height: 5,020 mm, Year of construction: 2019, operating hours: 5,010 h, Year of manufacture: 2019 Field of application: Construction Empty weight: 8.300 kg Dimensions (LxBxH): 583 x 230 x 271 cm Hsdpfxjx Hxq Ue Agloh

Condition: used, lifting height: 4,650 mm, Year of construction: 2015, operating hours: 7,510 h, Year of manufacture: 2015 Field of application: Construction Empty weight: 8.500 kg Hedpfx Agoxqfdgjljh Digging depth: 6.63 m

Condition: used, Year of construction: 2019, operating hours: 2,703 h, Empty weight: 1.600 kg Hodpfx Agsyf Hyajlsh Digging depth: 2.19 m