Used Bale Clamp for sale (8,996)

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Klsdpfoxp R E Tjx Ab Tjn Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Kjdpfx Aboygk H Te Teln Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Just arrived Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Please note: Kjdpfxoygk Hgo Ab Tsln All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale ex works, advance payment only, without warranty or guarantee.

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. Kledpeylwa Rjfx Ab Ton We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: ready for operation (used), Year of construction: 2015, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2015 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Fully inspected and tested. Additional feature: Protective covers on the rear side of the machine Ksdpfeykzhpex Ab Tjln FLITS Rental & Sales Service: With every machine, we supply a bundle of binding wire (120 wires). Do you need additional binding wire bundles? Feel free to request a quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you get the right machine quickly. You are very welcome to visit our location to view the machines. We are based at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to thoroughly inform you and show you the appropriate machines. We are happy to assist you! Waste press Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste management Waste processing

Condition: used, Various clamping lengths: from 20 to 200 cm Kjdpfxjx E T Ufj Ab Tjln A lot consisting of approximately 70 screw clamps from various manufacturers such as Bessey and others, featuring sturdy steel rails.

Condition: used, length 2.300 mm width 800 mm Kledpfx Abot H Tuxj Tsn height 2.700 mm dimension of workpiece max. 1.300 x 700 x 1.450 mm Pneumatic body press or gluing press for pressing furniture bodies or similar items.

Condition: excellent (used), Year of construction: 2015, Brand: HSM Model: V-press 860 max Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Kljdpfxsykpc Ue Ab Ton Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening: 120 cm x 65 cm Condition: Very good! Functionality tested. FLITS Rental & Sales service: Each machine comes with a bundle of baling wire (120 wires). Need more wire bundles? Request a non-binding quotation.

Condition: as good as new (ex-display), Product description: Klsdpfxoyk Tmdj Ab Ten RÖHM NC compact clamp RKE-125 178026 vise ----- Condition: This is new / unused stock. 2 units available. Price per unit.

Condition: as good as new (ex-display), Product Description: Klsdpfeyk Sf Eox Ab Tsn RÖHM NC Compact Vise RKE Jaw Width 125 mm 178412 Jaw Width: 125 mm Clamping Range: 0 - 216 mm / 97 - 312 mm Jaw Height: 40 mm Overall Length: 463 mm Clamping Force: approx. 40 kN ----- Condition: This is new, unused stock. 5 units available / price per unit

Condition: excellent (used), Clamping tower 4x NC 90 DUO 25x25 The clamping tower comes from a company liquidation. Good used condition. Kjdpfex N Imqjx Ab Teln

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Binding: 3-fold manual Kljdeyf Eh Aspfx Ab Tjn Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The baler is in good, fully functional condition and has been inspected and tested by us. The video can be found on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We accept no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, Technical details: width: 1270 mm depth: 1000 mm height: 1600 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm Kjdeu N Ea Hspfx Ab Tsln *

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Kljdpfxoyibymo Ab Tsn Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Overall dimensions: 2800x2570x2000 mm Klodpfx Aoyibhkjb Tjn

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: Kljdju Tg I Dopfx Ab Ton The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Klodpswzkcxsfx Ab Ton Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg Kljdpfeu Nklhsx Ab Tjn dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *

Condition: used, machine/vehicle number: 22031, Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 ASerial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Kodpsiiv S Sefx Ab Tjln Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1973, machine/vehicle number: 4700, 1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB IIYear 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video Klsdpfsh Aw T Hox Ab Tsn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1996, 4 Zangen Klebebinder - 4-Clamp Perfect Binder Horizon BQ 440Year 1996 - Serial-No. Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustable Automatic scoring and automatic feeding of the coversTechnische Daten / Technical Details: Papierformat / Sheet Size min. 75 x 75mm - 320 x 320mm Ksdpfx Absl Dqdzo Teln Umschlagstärke / Cover thickness: 80 - 300 gsm Buchstärke / book thickness min. 1 - 40 mms (10 up to 400 pages) Paper thickness: 52 - 157gsm Leistung / speed max. 150 - 1.100 Cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 1527, 1 Zangen Klebebinder - 1-Clamp Perfect Binder Ordibel Super MXSerial-No. 1527 Kledpfjrffmlsx Ab Ten Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustable Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, 1 Zangen Klebebinder - 1-Clamp Perfect Binder CP Bourg BB-3002 EVAYear 2008 - Serial-No. 61300520 Zählerstand / Counter 118615 Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustableTechnische Daten / Technical Details: Papierformat / Sheet Size min. 100 x 201mm - 385 x 750mm Umschlagformat / Cover Size min. 100 x 201mm - max. 385 x 750mm Buchstärke / book thickness min. 1mm - max. 60mm Umschlagstärke / cover weight range 80 - 300 g/qm Umschlagstapelhöhe / cover pile hight max. 80mm Leistung / speed max. 650 Cycles/h Abmessungen / dimensions 2.020 x 2.400 x 1.500mm Online-Video-Inspection by Skype-Video Kledpfoipaqyjx Ab Tjn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1963, machine/vehicle number: 418, 1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33Year 1963 - Serial-No. 0418 Ksdpfeh Aw T Ajx Ab Tsln 1 Clamp hotmelt binder Block back roughing with suction Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min Kledpfx Aog Uf I Asb Ten load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive