Used Bale Clamp for sale (9,119)

Year of construction: 2005, condition: good (used), Wooden power chuck Fabr.FORKARDT Type:3QLC/K250-72-Z8-S12-172005 Rodpfx Ajgqxg Hjg Iop Bore in chuck 72mm with clamping cylinder complete Year 2005 in good condition.

Year of construction: 1997, condition: excellent (used), Hydraulic system - clamping hydraulics Rjdpfx Agjmx Slze Iop For tool clamping - Clamping device Make:BACHOFEN HYDRAULIK Type:HA3B-L1/90 Year.15/1997 Tank : 3 L Clamping pressure :90 Bar In very good condition .

Condition: used, functionality: fully functional, jaw width: 16 mm, jaw height: 19 mm, Flat EDM vice, used Brand: Matchling Redpfx Agjymdiuj Iop Type: V1650 Length: 100 mm, Width: 100 mm, Height: 16 mm (without spindle) Material: stainless steel Jaw width: 16 mm Clamping range: up to 48 mm Jaw height: 19 mm With downforce feature stainless in wooden case

Condition: new, functionality: fully functional, jaw width: 20 mm, jaw height: 19 mm, Flat EDM vice Brand: Matchling Type: V2075 Rodpfxjymdamo Ag Ijp Length: 125 mm, Width: 100 mm, Height: 20 mm (without spindle) Material: stainless steel Jaw width: 20 mm Clamping range: up to 75 mm Jaw height: 19 mm Down-thrust feature Corrosion-resistant In wooden box

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, empty load weight: 1,123 kg, opening width: 1,525 mm, Roll clamp Load center: 760 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Rjdpfxeydf Ruj Ag Isp Condition: Operational and fully functional Technical Condition: Very good Description: In addition to this device, we offer a wide range of forklifts and warehouse equipment. All our units are inspected and certified in accordance with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also interested in purchasing your used equipment, even if you do not buy a machine from us. Lease-purchase and financing options are available upon request at attractive terms. We are happy to provide you with knowledgeable and comprehensive advice on our vehicles.

Condition: used, diameter 250 mm Rsdpfx Asicbq Njg Ijp

Condition: used, weight 1 kg taper MK 4 Rodpjl Idr Njfx Ag Iop different center points. price per piece.

Condition: used, Year of construction: 1992, table length 1 mm table width 1 mm table load 1 t round table plate Ø 600 mm with 3 t-slots (18/30), Slot-distance: 160 mm, with Rjdpou Sbc Njfx Ag Iop misc. clamping plates and clamping pot!

Condition: used, length 1000 mm width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m used angle plate in good condition with several bores for clamping. Rjdpfx Aoh Ig Tpeg Ijp

Condition: used, diameter 200-400 mm Rsdpeu Sbgbefx Ag Ijp different adapting flanges available. Price per pc.

Year of construction: 2015, condition: used, weight 25 kg taper MK 0 Redpfxswlvh Us Ag Ijp Consisting fo following modules: 4 pcs Multi Quick MQ200 complete 200-160-2428 4 pcs structural element B50 pcs. structural elementB50 pcs. tension shoe 100-2-205-25

Condition: used, length 720 mm width 500 mm height 600 mm weight of the machine ca. 0,7 t dimensions of the machine ca. 1200x640x600 m Rjdpog A U Sxofx Ag Isp

Condition: used, length 720 mm Rjdpeg A U S Asfx Ag Isp width 500 mm height 700 mm weight of the machine ca. 0,7 t dimensions of the machine ca. 1200x640x700 m

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. Rsdpsgqg Rujfx Ag Ijp --- price per piece ----

Condition: used, table length 600 mm table width 600 mm Rodpfed Ihbbox Ag Iep table load 0 t different clamping tables, former used on a HÖFLER measuring machine! As complete package or single table available.

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. Rsdpfx Aegqlkgeg Isp --- price per piece ----

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 Rjdpfxowzkcxo Ag Ijp new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Rjdpfoymmtcjx Ag Isp Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: like new (used), Position 1 TS 125 Magnum tower clamping system Jaw width 125 mm Clamping widths: 1 x 476 mm 2 x 226 mm 4 x 108 mm overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7.850,00 € + VAT. Position 2 4 pieces hydraulic vices jaw width 125 mm overall length 400 mm Price per piece 850,00 EURO + VAT. Price for 4 pieces 3.000,00 EURO + VAT. Position 6 Preci Tool NC, type 125 jaw width 125 mm overall length 430 only 1 fixed jaw Price: according to bid position 8 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. Position 9 HILMA machine vice mechanical/hydraulic clamping force 50 daN jaw width 160 mm overall length 550 mm Price: 900,00 € + VAT. item 10 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 380 mm Price: 650,00 € + VAT. item 11 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 40 daN jaw width 125 mm overall length 430 mm Price: 850,00 € + VAT. position 12 HILMA machine vice with rotary plate mechanical/hydraulic clamping force 50 daN jaw width 160 mm Redpfsic Rnujx Ag Iep overall length 620 mm Price: 1.050,00 € + VAT. Position 26 HILMA machine vice (exhibition version) jaw width 125 mm overall length 430 mm Price: according to bid item 28 HILMA machine vice mechanical/hydraulic clamping force 25 daN jaw width 100 mm overall length 570 mm Price: 700,00 € + VAT. Position 32 Clamping angle clamping surface 160 x 420 mm Price: 150,00 € + VAT. Position 33 Clamping angle with HILMA vice jaw width 125 and load cell Price: 450,00 € + VAT.

Condition: used, Trabo WSB33 Net locking dimensions: 3680*2700mm. 6 hydraulic jacks in two groups Electric operation Module dimensions 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height of the stop strip 130 mm - Documentation available: No - CE certificate present: No - Serial number: 104790/0007 - Press drive: Hydraulic - Max. clamping width [mm]: 140 - Max. clamping height [mm]: 2500 - Max. clamping depth [mm]: 3400 - Number of cylinders [pcs]: 3 - Options: Remote control, Horizontal/vertical cylinders separately controlled Rjdpewnh D Hsfx Ag Ijp - Deals (actions): er deal Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Rodpfx Ajx H R U Ssg Iep Year of manufacture: 2012 Pressing force: 40 t

Condition: used, total width: 4,600 mm, total length: 1,300 mm, total height: 3,600 mm, Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. clamping width [mm]: 4000 - Max. clamping height [mm]: 3000 - Number of cylinders [pcs]: 5 - Number of counter-pressure cylinders [pcs]: 3 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 1300mm x 4600mm x 3600mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Redpeychzyofx Ag Iop Yorick Diebels

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Rodpjv Ai Tgjfx Ag Isp Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Rjdpfx Asv Akr Reg Isp Chamber height (cm): 110 Year of production: 2010-2015 Pressure force (t): 3 Noise level (dB): 69

Condition: excellent (used), Baler Hsm HL 4812 Pressing force: 480 kN Unitary pressing force: 58 N/cm² Drive power: 15 kW Voltage / frequency: 400 V / 50 Hz Working cycle time: 33.5 s Rjdpfx Aev Ak Dgsg Iep Idle capacity (theor.): 95 m³/h Loading opening width x length: 1020 x 1250 mm Bale width x height x length: 1100 x 750 x 1200 mm Bale weight: 420 kg Total length x width x height: 5158 x 1642 x 2550 mm Machine weight: 5899 kg Type of consumables: wire Compressed material: foil, mixed paper, cardboard Year 2017 15kw engine