Used Bale for sale (402)

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Pgodpfsimv N Tox Amisk

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Pedpfx Amju Tg I Djiegk Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Available from 15.05.2026 Baling Press Paal Konti 325 G, Year of manufacture 2013 Pgjdpfxjy A Ibno Amiok Technical Data: Manufacturer: Paal Model: Konti 325 G Year of manufacture: 2013 Operating hours: 11,723 (as of 10.02.26) Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput rate at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12,216 x 2,530 x 2,800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on the manufacturer's information. We do not assume liability for the details provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. Sale against prepayment ex works, without warranty or guarantee.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm Pgsdpfx Asy A Uadomiek ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Pgedpfx Amey Avlneiek Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee. Pgodpfx Amey Avhcoiok

Condition: ready for operation (used), Year of construction: 2021, load capacity: 1,400 kg, Brand: KAUP Type: 4.5T413 Serial number: Njbmgmfmjy A Igkoiswf Year of manufacture: 05/2021 Load capacity: 1400 kg Pjdpsy Htl Hofx Amiogk Maximum opening width: 168.5 cm FEM 2 Condition: very good condition

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Pgodpfx Aeyz Snpemijk Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Pgedpfoyz Salox Amijk Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Please note: All technical details are based on information provided by the manufacturer. We accept no liability for the accuracy or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms require 100% advance payment.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Pgsdpfx Ajyz R Uusmijk Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, Year of Manufacture 2019 Technical Data: Manufacturer: Presto Model: CC 20 M Year of Manufacture: 2019 Operating Hours: 1,022 Pressing Force: 20 t Cycle Time: 24 s Drive Power: 7.5 kW Filling Opening: 1030 x 750 mm Filling Volume: 0.53 m³ Pgsdpfxeyz R S Hj Amijk Tying: 3-fold, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine Weight: approx. 2,500 kg Materials: Paper, Cardboard, Film Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or our YouTube channel. Please note: All technical data is based on manufacturer information. We accept no liability for the details provided or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Psdpfxoyz R Hqs Amijgk Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Pjdoyz R Eyspfx Amiogk Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Technical Specifications: Manufacturer: Presto Model: CC 50 M Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Pgedsyz R Etspfx Amiok Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Baler Presto CC 30 V, Year of Manufacture 2006 Technical Data: Manufacturer: Presto Model: CC 30 V Year of Manufacture: 2006 Pressing Force: 30 t Cycle Time: 34 s Drive Power: 11 kW Filling Opening: 1080 x 950 mm Filling Volume: 0.69 m³ Tying: 4-fold, automatic Throughput Capacity at Bulk Density of Pgsdpfx Aeyz Il Djmiek 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale Dimensions: 700 x 950 mm Bale Weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine Weight: approx. 3,900 kg Materials: Paper, cardboard, film Please note: All technical data is based on information provided by the manufacturer. No liability is assumed for the accuracy or possible errors in the stated information. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee. Psdoyzzgnopfx Amiegk

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Pgedpfx Amjyzcwheiek Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Pjdpfx Amsyzcvwsiegk Location: Husum Operating manual available

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, The HSM HL 3521 S model, with its very large loading aperture, is an optimal device for compacting large quantities of paper, cardboard, film, and other packaging materials with particularly large and bulky dimensions. The HSM HL 3521 S model is also a specialist in baling highly expandable materials such as foam. The press was purchased brand new. Regularly serviced. Price of a brand-new machine: approx. €90,000 Year of manufacture: 2023 Pgsdpfx Aoy H Dazemiok Pressing force: 320 kN Max. bale weight: 600 kg Machine dimensions (W x D x H): 7900 x 1660 x 2485 mm Loading aperture (W x H): 800 x 2100 mm Several units of the HL 3521 S model available from years: 2011 / 2015 / 2017 / 2023

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Podpfx Ajra Rbgomiogk Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: good (used), Strautmann AutoLoadBaler baler Baler for compacting: Cardboard Foil PET bottles Foam Cans Electronic waste Machine dimensions (L / W / H) mm: 2047 / 2179 / 2950 Filling opening approx. 1192 mm / 575 mm Pedpfsv Aktnjx Amisgk Bale dimensions (L / W / H) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force: 530 kN Year of manufacture: 2017-2018

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of manufacture: 2010-2015 Pressing force (t): 3 Noise level (dB): 69 Price: 2,000 EUR B5 - Ideal for large cartons: Psdpfx Aov Akr Rsmiogk High performance – high throughput The bale is ejected automatically Strap rollers positioned at the front for easy strap replacement Cardboard bale weight (kg): 80-110 Plastic foil bale weight (kg): 90-130 Bale size W x D x H (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions W x D x H (mm): 1360 x 895 x 2370 Weight (kg): 600 Filling opening width x height (mm): 1000 x 500 Year of manufacture: 2014-16 Price: 3,800 EUR

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition, unused after overhaul. Serviced only by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600-1200mm. 15 kW motor. Year: 2007. Bale weight approx. 380 kg. Pgsdpfox S Sbdox Amiek

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Pgedpfx Amsy D Dr Seisk Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, filling opening width: 920 mm, filling opening length: 1,600 mm, Hello, I am selling a fully operational Paal Comdec channel baler. The machine has been serviced and is in very good technical condition. It comes complete with a belt conveyor. In 2025, the conveyor belt was replaced. Pgedoyk Uzpjpfx Amiok