Used Bale for sale (400)

Condition: used, functionality: fully functional, load capacity: 6,000 kg, Bale clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Kodpfx Anjw Ez Tcoyslu Condition: Ready for use and fully functional Technical condition: Good Description: ISO 4A (61 cm) Capacity 600 kg Sideshift Width 1,550 mm Clamps 1,400 mm ID OS1696

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,600 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: good Description: Year 2015 ISO 3A (51 cm) Capacity 3,600 kg Sideshift Width 1,700 mm Clamps 1,200 mm ID OS1694 Kljdpfx Anjw Ez Sxsyou

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Kodpfex N Dp Uox Anyolu Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1751

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Description: Year 2021; ISO 3A (51 cm); Capacity 5,000 kg; Sideshift; Opening range 550-2,560 mm; Width 2,000 mm; Clamps 1,550 mm; ID OS1546 Klsdjw Dwrlepfx Anyeu

Condition: excellent (used), functionality: fully functional, filling opening width: 1,600 mm, filling opening length: 2,200 mm, bale width: 400 mm, bale height: 400 mm, total width: 3,345 mm, total height: 3,160 mm, total length: 7,440 mm, input voltage: 380 V, overall weight: 28,000 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Baler 400 x 400 mm. Very good condition. Well maintained. Kledpfxexcazwe Anysu

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm Ksdpfx Anst Ucqfeyelu The press was in operation until the production line was shut down.

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Kledpfxjymmtcs Anysu Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: ready for operation (used), Vertical baler Dixi 50S PET Year of manufacture: 2019-2021 Bale dimensions (L x W x H) (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Technical data (L x W x H) (mm): 1600 x 1300 x 3100 Filling opening (mm): 1200 x 670 Ksdpfov Amtkex Anyjlu Pressing force: 50 tons Power supply: 400 V

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Kodpfxjra Nrxs Anyelu Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Ksdsv Amv Eopfx Anyolu Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Width: 0,55 m Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring Klsdpfxjd H Twie Anyju without engine

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Refurbished 12m length Everything in perfect condition Operational Located at company headquarters. Kledpfsxfg Sbsx Anyeu

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. Kodexfl Izspfx Anyjlu The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Kledpfevvk T Iox Anyju We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, condition: new, Layout: Round bale grab Kedpfxsn Tm Nko Anyolu Carrying capacity: 3.000 kg Attachment suited for: Agricultural machines Galen bale spear is produced to load your hay bales from 200 kg to 4000 kg from the ground to a trailer, truck, or stack them on your farm. As Galen we produce hay spear for telehandlers, tractor rear and front loaders, excavators and any other loaders that you requsted.

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Kedpfxjzcu U Ts Anyelu Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. Kljdpfexrpkmex Anyeu FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: used, Model: Balestrini 1+1 dual-spindle turret press, patterning machine, 2500mm worktable size, used, tested. Kledpfxozfi Sde Anyeu

Condition: excellent (used), Balestrini linear milling machine Two milling units Milling height max 100mm Milling length max 1500mm Kedpfx Aovt Aynjnyolu Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: excellent (used), Balestrini NOVA 3 envelope tenoning machine Main motors 2 x 2.2 kW Diameter of spindles 25 mm Spindles length 70 mm Spigot diameter 2 x 100 mm Automatic material loading and discharge Ksdpfx Aevkcfrjnyelu Workpiece length min/max 199.5 mm / 2030 mm Thickness of workpieces 100 mm Width 90 mm

Condition: used, Year of construction: 1995, Bacci brand double-shaft milling machine, CP CNB model, with 4 right-hand groups and 4 left-hand groups (2 for milling and 2 for sanding) Klodpfozcpxyjx Anyeu

Condition: ready for operation (used), Year of construction: 2008, The Balestrini CP 100 (manufactured in versions such as CP 100/6 or CP 100/8) is an industrial, multi-spindle wood profiling and copying machine. It is used for precise shaping and copying of curved components. It is typically used in the production of chairs, bent furniture, and door and window frame elements. Technical specifications: Construction: The machine is equipped with several working units (heads) that operate simultaneously based on copying templates. Drives: Main motors with power usually exceeding 2.9 kW (up to 10 HP depending on the configuration), often powered by 380-400V. Working equipment: It features tables with adjustable angles in two planes and a pneumatic clamping system that ensures the stability of the workpiece. Parameters: The machine allows for milling components with a length often exceeding 2000 mm in larger versions. The weight ranges around 900 kg. Kledpfjzbc Rtsx Anyeu

Condition: excellent (used), Milling machine, copy router in very good working condition. Kljdpfox Rrtdjx Anyou

Condition: excellent (used), functionality: fully functional, Balestrini Mini-C 2500mm Linear Copy Milling Machine Model MINI-C Klsdpfxsy Ew Ehj Anyju Working table length: 2500 mm Two milling units, one per side Milling motor: 2 x 5.5 kW Maximum tool height: 120 mm Heads included Hydraulic table feed, steplessly adjustable Pneumatic clamps for units and material Number of material clamps: 5 pcs.

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model BALESTRINI CP 90 - 4 second hand machine working condition : Excellent Kledox A Hatopfx Anyju CE mark : YES with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 4,5 / 6 ( 2 speeds ) max. working width mm.500 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:18 m/min. hydraulic carriage return speed: 75 m/min. volt. 380/50