Used Bale for sale (392)

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Dkjdpfsra Rbgjx Afneh Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Type: Bale clamp / Rotating clamp Dkodpfx Afex Aw Syjneh Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment Djdpfsh Dy Rfsx Afnskh

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Dkedpfxoic Rl De Afnjh Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Djdpfeiuky Iex Afnekh

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Djdjra Nyujpfx Afnskh Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. Djdpfx Afjlc Du Nenokh all dimensions are approximate Errors in the description expressly reserved.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Dodpfsxmvc Eox Afnjkh Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm.

Condition: used, Year of construction: 2007, load capacity: 10,000 kg, For sale: C-hook coil lifting hook PFEIFER Condition: used, but technically sound and ready for work. Reliable lifting device from the German manufacturer PFEIFER Seil- und Hebetechnik, manufactured in 2007. Technical specifications: Djdpfxsxhgvfs Afnskh Lifting capacity: 10 t Design: C-hook coil lifter Manufacturer: PFEIFER, Germany Year of manufacture: 2007 Application: The device is designed for lifting and transporting heavy coils using overhead or gantry cranes. Typical areas of use: Metallurgy – lifting steel, aluminum, or other metal coils Paper industry – handling large paper rolls Logistics and warehousing – safe transport and storage of coils The C-shaped design allows for quick and convenient gripping of the coil by its core, ensuring stable weight distribution. This increases workplace safety and improves handling efficiency. If you have any questions, we will be happy to assist you.

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Dedjv Ai Tgjpfx Afnekh Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Djdpju D S Tisfx Afnjkh Technical condition: very good Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 6422.P01.347, bale weight: 100 kg, type of input current: three-phase, power: 7.5 kW (10.20 HP), year of last overhaul: 2023, The machine comes with a complete wiring diagram. Dodpjxz Avujfx Afnskh

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Dodpfx Aora Nrmefnskh Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: used, Year of construction: 2012, operating hours: 31,000 h, functionality: fully functional, pressing force: 90 t, filling opening width: 940 mm, filling opening length: 1,600 mm, bale width: 1,000 mm, bale height: 800 mm, total width: 5,800 mm, total height: 5,680 mm, total length: 9,050 mm, overall weight: 16,500 kg, power: 53 kW (72.06 HP), volume flow: 190 m³/h, tank capacity: 1,500 l, Equipment: documentation/manual, The baler has been in operation since 2012 and has been primarily used for compressing paper materials, which make up approximately 85% of the total volume processed. The remaining materials include film/nylon and a small percentage of plastics. The machine has undergone regular maintenance and remains fully functional to this day. It continues to serve as our main baler in daily operations. Operating Schedule: 5 days per week, 8 hours per day Throughput: Approximately 50 tons per day In 2023, we replaced the carriage plate wheels and bearings. The pump for the pressing channel is new. The machine operates under excellent pressure conditions; we consistently achieve container loads of 25 tons of compacted cartons. The tying system is fully functional and performs reliably using a 4-wire configuration. Dkodpsx H Rmbjfx Afnsh The main cylinder piston was recently replaced with a new one, installed by local technicians. Minor modifications have been made to the tying system and the spring system that prevents material expansion back into the carriage plate area. These changes are The channel is in good operational condition. Recently, the old floor was removed due to wear, and we applied a filler compound (similar to concrete) to smooth out irregularities and prepare the base for a new floor installation. This work ensures proper alignment and durability moving forward. The conveyor is in working order, with visible signs of wear on the side panels. These are cosmetic and clearly visible in the photos included in this report

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Dkedpow E Htuefx Afnjh Machine decommissioned

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Dedpewvwtasfx Afnskh Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: used, Year of construction: 2019, Chamber Press - Baling Press - Raw Material Press Bramidan X30 AD, used 🧰 Product Features • Manufacturer: Bramidan • Model: X30 AD • Condition: Used, see photos • Color: Orange • Year of manufacture: 2019 • Dimensions: approx. 1760 x 1255 x 2295 mm • Net weight: 1650 kg • Press force: 300 kN • Cycle time: 25 seconds • Power: 4 kW • Voltage: 3 x 230 - 440 V / 50/60 Hz • Noise level: 59 - 60 dB Dkjdpfxoxvyn Do Afnjh • Bale weight: Plastic up to 425 kg, cardboard up to 350 kg 💰 Price € 8,900 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions; all prices excl. VAT ex stock.)

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Dkedpfx Ajra Nqhofneh Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, pressing force: 50 t, overall weight: 17,000 kg, empty load weight: 17,000 kg, Technical data: Avermann Maschinenfabrik GmbH & Co. KG Type: AVOS 1410 BS-22/50 Year of manufacture: 2000 Pump operating hours: 25,000 hours Feeding channel dimensions: 1,400 x 1,000 mm Bale size: 1100 x 750 mm (width x height), length adjustable Drive power: 22 kW Net weight: 17 t Capacity: 5.5 tons/hour Bale weight: depending on the material, up to 500 kg Vertical, 4-fold tying, fully automatic PLC control: Siemens S7-1500 Dkjdpfx Afjw N Hlqenjh Assembled baler dimensions: 8,610 x 2,400 x 3,835 mm (length x width x height) Special equipment: Wear-resistant floor made of HARDOX steel The conveyor belt is not included with the machine. Documentation: the complete operating manual is available. Viewing is possible by prior appointment. We do not assume responsibility for the technical data or possible errors. Condition of the press: It is in working condition thanks to continuous servicing. It has been used exclusively for baling paper. Avermann baler type AVOS 1410 BS-22/50, including wire-drawing stations and bale chute.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, pressing force: 25 t, filling opening width: 1,090 mm, filling opening length: 530 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, total width: 1,760 mm, total height: 1,995 mm, overall weight: 1,410 kg, noise level: 59 dB, transport height: 1,995 mm, year of last overhaul: 2025, Vertical baler Bramidan 4- x 25 for 25 t pressforce. In good condition, ready to work. Bale weight 200-300 kg. Dsdewpmbaopfx Afnskh

Condition: not inspected (used), Year of construction: 2005, Scraper conveyor: 5m Dedpfx Aod H Twijfnjkh Width: 0,55 m Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring without engine

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Djdpsw S Tv Uefx Afnskh

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 850 kg, empty load weight: 610 kg, opening width: 2,400 mm, Bale clamp Dkjdpjuhwz Rofx Afneh Condition: Ready for use and fully functional Technical condition: good Description: Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Errors and prior sale reserved, sale only to traders... every sale of used goods takes place under exclusion of warranty and or guarantee.

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Dksdpfx Aeki Einsfneh

Condition: good (used), Year of construction: 1985, -KOM 421 Dkjdodl T Hlspfx Afnjh Offered here is a Bunion brace of company Tigrip type TR 0.75 / 1050. The Bale clamp works mechanically and is therefore in perfect condition! Gripping area: 700 – 1050 Capacity: 0.75 t All other information, please refer to the pictures. Pick up is shipping for free-please enquire. You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail!