Used Bale for sale (385)

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. Fpsdpfx Alsy D Dr So Uon New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: used, functionality: fully functional, load capacity: 7,000 kg, Bale clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Fpsdpfxozz Ea Ao Al Uen Technical condition: good Description: ISO 4A (61 cm) Capacity 7000 kg Opening range 675-3320 mm Width 2250 mm Clamps 1800 mm ID OS2092

Condition: ready for operation (used), Pressing force: 60 tons Dixi press, model 60s, year 2011, costs 3,800 EUR. Model years 2017-2019 cost 5,200 EUR. Beam dimensions: 120 x 80 x 110 cm Fodpfsra Nqhsx Al Uepn Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight: approx. 2430 kg Beam weight: up to 500 kg Oil heating system Motor: 7.5 kW New, showroom model press costs 11,000 EUR.

Condition: ready for operation (used), Vertical baler Dixi 50S PET Year of manufacture: 2019-2021 Bale dimensions (L x W x H) (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Technical data (L x W x H) (mm): 1600 x 1300 x 3100 Filling opening (mm): 1200 x 670 Pressing force: 50 tons Fpjdpfx Alev Amtks Usn Power supply: 400 V

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Fpjdexfl Izepfx Al Uon Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Fodeztgnxopfx Al Uspn

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management Fpsdpfjndcxgsx Al Usn - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 530001846, pressing force: 70 t, filling opening width: 1,020 mm, filling opening length: 900 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,060 mm, total height: 2,394 mm, total length: 5,992 mm, type of input current: three-phase, input voltage: 400 V, input current: 19 A, overall weight: 7,500 kg, warranty duration: 3 months, noise level: 70 dB, pressure: 58 bar, transport height: 2,400 mm, pressure (max.): 70 bar, opening width: 1,020 mm, empty load weight: 7,500 kg, year of last overhaul: 2026, volume flow: 43 m³/h, operating pressure: 70 bar, transport width: 2,066 mm, transport length: 5,992 mm, protection type (IP code): IP54, input frequency: 50 Hz, tank capacity: 123 l, stroke length: 1,500 mm, Equipment: documentation/manual, FOR SALE: HSM HL 7009 Li hydraulic baling press Manufacturer: HSM Pressen GmbH, Germany Single-chamber horizontal baling press for waste, used Suitable for compacting/baling paper, plastics, PET bottles, municipal waste, etc. In the case of paper, suitable for logistical packaging for paper mills = waste valorization Fpedpfx Aozmu Umsl Usn Pressing force: 70 tons (compaction ratio approx. 6:1) Motor: 11 kW, 3x400 V Overall dimensions of the machine/press: 580 × 290 × 300 cm (L × W × H) Bale dimensions: 120 × 110 × 110 cm (L × W × H), 1.5 m3, 650 kg, 1 bale = 1 pallet Bales can be stacked on top of each other Automatic bale ejection system onto pallets Easy bale tying with 4 strands of iron wire Machine/press weight: 7400 kg Year of manufacture: 2017 Both left-hand and right-hand models are available for optimal placement in the facility. The machine has been inspected and serviced, is leak-free, regularly maintained, and ready for use. 3-month warranty. Invoice provided, price excludes VAT. Transport: - Loading included in the price - Personal collection at Moravec 41, Žďár nad Sázavou district - Alternatively, truck transport can be arranged.

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Fjdpfxoyim Ays Al Uepn Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 machine for sale. The machine underwent its last maintenance check in March 2026, during which no significant issues were identified. The machine is fully functional and has since been taken out of production. It is in good condition and is currently located in France. Fjdpfx Alezlnb Dj Ujpn Technical specifications of the machine: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approx. 500 kg Number of binding wires: 5 vertical Dimensions of feeding hopper: 1420 x 972 mm Weight of press: approx. 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Fpjdpsz H I Dlefx Al Uen Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALLER PAAL KONTI 425 C Lebl Nm Esycfuqogvjhl Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Fodpfez Eg U Tsx Al Uopn Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE UPON REQUEST!

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter Fsdpfeyyy Dpjx Al Uepn - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: used, Year of construction: 1994, 1. LIKON 200C Horizontal Baler Machine Technical specifications: Engine power – 22 kW Year of manufacture – 1994 With oil cooler Horizontal tying x 4 times Pressing force – 30 t Overall dimensions of the baler: 10,000 x 2,000 x 2,750 mm Press weight: 10 t Loading opening dimensions: 1,400 x 700 mm Bundle dimensions – 700 x 1,100 x 1,000-1,200 mm, variable length With hydraulic oil No tying wire It was used in a printing shop without a conveyor belt, only with dry-shredded printing waste! Itsbqk Tew S Hpzoymxsp Operating hours – 62,639 The baler is in good condition and ready for operation. PRICE ON REQUEST! 2. Horizontal Baler BAUER 300 The baler is in good working condition (previously used in a printing house)! Fedpfx Aloz Eg Hce Uspn Technical specifications: Installation for a secondary raw material baler Manufacturer: BAUER Model: 300 Year of manufacture: 1994 Power: 22 kW Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AND PHOTOS AVAILABLE ON REQUEST!

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of manufacture: 2010-2015 Pressing force (t): 3 Noise level (dB): 69 Price: 2,000 EUR B5 - Ideal for large cartons: High performance – high throughput The bale is ejected automatically Strap rollers positioned at the front for easy strap replacement Fpsdev Akr Repfx Al Ujn Cardboard bale weight (kg): 80-110 Plastic foil bale weight (kg): 90-130 Bale size W x D x H (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions W x D x H (mm): 1360 x 895 x 2370 Weight (kg): 600 Filling opening width x height (mm): 1000 x 500 Year of manufacture: 2014-16 Price: 3,800 EUR

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Fsdpfx Ajv Akmzel Uopn Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: used, Year of construction: 2005, Technical details: pressure: 58 t Fsdpezgvhhsfx Al Uspn box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: used, Model: HSM V-press 1160 plus baler Fedpfx Alov Al Tis Uopn Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Fsdezxzxcepfx Al Uspn Year of manufacture: 2013 Pressing force: 40 t

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2020, very good condition Technical data: Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Fsdpfx Alez H I Eps Ujpn Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, polystyrene, non-woven fabric, glass wool, etc. Note: The machine is in very good, like-new condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It has been inspected and tested by us. You can find the video on our website or YouTube channel. The operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,600 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3600 kg Side shift Opening range 520-2120 mm Width 1350 mm Clamps 1250 mm ID OS2086 Fpsdpfx Alozz Eapj Ujn

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Fpsdpfszllvljx Al Ujn ISO 3A (51 cm) Capacity 3500 kg Side shift Width 1300 mm Clamps 1400 mm ID OS2027

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Fpedpfx Aezxqkzjl Uen Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Fpedpfx Alozxzv Us Usn Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Fjdpfx Alezxqpdo Ujpn