Used Bar Shelf for sale (15,422)

Condition: excellent (used), Year of construction: 2016, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Gijdpexw Nx Iefx Aa Aor Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg

Condition: used, mileage: 599,739 km, power: 265 kW (360.30 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space length: 8,970 mm, loading space width: 2,480 mm, loading space height: 230 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz 2636 Antos Refrigerated Box Truck with BÄR Tail Lift 6x2 !!! 3 identical vehicles in stock !!! Suspension: Air-Air Wheelbase: 5.60 m + BÄR tail lift + Carrier refrigeration unit Special equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Exhaust down to the right, Right-hand exterior mirror with maneuvering position, Compressed air connection in cab, High compressed air unit, Pneumatic horn, Driver assistance system: Brake Assist (Active Brake Assist), Vehicle without trailer coupling, Alternator 150 A, 2-cylinder air compressor, Steerable and liftable trailing axle, Tail lift switch, Fleet management system interface, Circuit breaker, Gsdex Axpaepfx Aa Aoir Seats in cab: Driver’s comfort air suspension seat, External sun visor, Side window roller sun blind, driver’s door, Voltage converter 24V / 12V 10 A, 12V socket in co-driver’s footwell, Additional 24V socket in co-driver’s footwell, Automatic daytime running lights Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2-line, connections left, 24V / 15-pin trailer socket, Antos, Electrically adjustable and heated exterior mirrors, Battery 170 Ah, Rear axle differential lock, Steel air tanks, Driver assistance system: Lane Keeping Assist, Cab width: 2.30 m, Cab: hydraulic tilting system, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with 320 mm engine tunnel, Suspension: air / air (full air), Electric windows, Tinted windshield, 12-speed gearbox – Type: G 211-12, Urea tank (AdBlue): 60 ltr., Manual pop-up roof (steel), Rear axle, crown wheel 440, Info display 10.4 cm, Central locking system, Fuel tank: 290 ltr. aluminum, Unregulated power steering pump, Front air intake, Engine 10.7 ltr. – 265 kW R6 diesel (OM 470), Engine brake, Engine compartment encapsulation, Trailing axle single tires, Ramp mirror, Residual heat utilization, Disc brakes front and rear axles, Seat cover/upholstery: fabric, Cab seats: co-driver function seat, Front mudguards, front axle stabilizer, Additional stabilizer, Rear/trailing axle, 24V cab socket, Tachograph / EC control device, Aerodynamically shaped underbody cladding, Front underrun protection, Cranked front axle, Regulated water pump We are also happy to assist you in financing/leasing through our partners. All information without guarantee. Subject to error and prior sale.

Condition: excellent (used), CATALOGUE NO. 6623 TECHNICAL DATA - Output log diameter: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW Giodex Rqzaopfx Aa Aer - Feed motor: 1.7 kW Configuration: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – German-made – Ability to turn posts into cones – Used rounder, in very good condition Net price: 98,900 PLN Net price: 23,550 EUR (based on the rate of 4.2 EUR) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer of the manufacturer. All trademarks and names are used solely for identification purposes. We resell only goods that have already been placed on the market by the manufacturer. MAR-MASZ has no business relationship with the manufacturer.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Gsdpfx Aoh R Taqsa Asir Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: Gedpfxsmhhypj Aa Aoir - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Gjdpfxsmhh Dhe Aa Aoir - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm Giedsfdkb Tspfx Aa Aer - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Giodpemhh Dzsfx Aa Ajr - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Godpfxsmhh Ano Aa Asir - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Gjdoguk A Hepfx Aa Ajir Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gijdpfeguk Dksx Aa Ajr - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels Gedomhhy Nopfx Aa Asir - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Giedpjmhh Dtefx Aa Asr We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Godpfx Aasguk Dvs Ajir 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 421,128 km, power: 157 kW (213.46 HP), first registration: 09/2018, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 36 m³, loading space length: 7,260 mm, loading space width: 2,470 mm, loading space height: 2,030 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, DAF LF 210 FA 4x2 Box Truck with Tail Lift VIN: L476365 Chassis / Attachments: * Wheelbase: 5,000 mm * Leaf / air suspension * Tyres: 245/70 R17.5 * Remaining tread: front approx. 60% rear approx. 60% Cab: * 3-seater * Spoiler * Roof hatch * Storage above engine tunnel * Air conditioning * Radio with navigation * Reversing camera Body: * PL Fahrzeugbau box body * Underside of body hot-dip galvanized * Dimensions: L=7.26m W=2.47m H=2.03m * Load securing rails mounted on top * approx. 36 m³ * BÄR BC1000S4 tail lift Engine / Transmission: * 213 hp / 157 kW // 4,500 cc // Euro 6c * Engine brake * Automatic Weights: * Gross weight: 11,990 kg * Unladen weight: 6,190 kg * Payload: 5,800 kg Miscellaneous: * German vehicle * Was under maintenance contract * TÜV / Safety inspection until 09/2026 New main inspections, safety inspections or gross weight downgrades/upgrades are possible on request. We are happy to assist you in obtaining export/temporary registration plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typing errors. Subject to changes, prior sale and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide variety of vehicles. Our corporate philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact person to accompany them during the purchase or sale of vehicles. Godpfsy Aqvuex Aa Aoir See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to help you organise special transports. Day plates / export registration plates We are happy to help you obtain export/temporary registration plates. Handling of customs formalities We are happy to assist you with customs matters.

Condition: used, High-pressure hydraulic power unit up to 630 bar WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader, hydraulic spreading tool Year of manufacture: 1988 / 1986 Hydraulic power unit type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader tool - WEBER spreader type SP30 / 59 198.0 Spreader range = arm length 340 mm Spreading distance max. 610 mm Spreading force in working range max. 132 kN Closing force 99 kN - Twin hose with quick-release coupling Rated power 0.9 kW Gjdpfjdzp S Rsx Aa Aeir Power supply 220 Volts, 50 Hz Weight hydraulic unit approx. 40 kg Weight spreader approx. 25 kg Very good condition Hydraulic rescue set for fire brigade with hydraulic power unit and spreader. The spreader is used to create rescue openings after road traffic accidents by spreading. Also suitable for compressing or lifting loads. Versatile application thanks to the multifunctional spreading jaws made of drop-forged and hardened steel.

Condition: reconditioned (used), Hammelmann HDP, 064 with 2000 bar and 14 l in excellent condition. Giodpfx Aasy Anwps Ajr

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMA06SZZ8HM742116, mileage: 938,000 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 11,210 kg, maximum load weight: 6,790 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, next inspection (TÜV): 03/2025, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,440 mm, loading space width: 2,490 mm, loading space height: 2,450 mm, Year of construction: 2017, Equipment: ABS, additional headlights, air conditioning, cooling unit, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, retarder, tail-lift, traction control, trailer coupling, For sale is a MAN TGS 18.460 with a Schmitz Cargobull refrigerated box body, with a Bär BC 2000 tail lift and a Carrier Supra 850 refrigeration unit. The vehicle is in very good technical and visual condition and is ready for immediate use. Vehicle data: - EZ: 03/2017 - Mileage: 938,000 km - HU 03/2025 - Euro 6 - FIN: WMA06SZZ8HM742116 - Engine power: 460 HP - Tire size: 315/70 R22.5 - Tread depth approx. 60% - Automatic transmission - Total weight: 18,000 kg - Curb weight: 11,210 kg - Payload: 6,790 kg - Retarder - Lane departure warning - Adaptive cruise control - Blind spot camera - Hill start assist - Air suspension rear axle - Disc brakes on both axles - Multifunction steering wheel - Automatic climate control - Auxiliary heating - Navigation - Radio - Radio - Refrigerator - Driver's seat with air suspension - Seat heating - Rear view camera - Duomatic - Multiple work lights - LED Taillights - Wind deflectors - Air horns - Storage box - Tail lift manufacturer: Bär, type BC 2000 - Body manufacturer: Schmitz Cargobull - Cooling unit Carrier Supra 850 - Internal dimensions of the body: Length 7440 mm Width 2490 mm Height 2450 mm Offer subject to change, input errors, changes, mistakes and prior sale reserved. Giodpfx Aourih Sea Aor Financing available on request. We are also happy to organize customs clearance for you. Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by arrangement. Invoice with VAT shown will be issued upon sale. Price is NET/ subject to negotiation Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, Year of construction: 1998, functionality: fully functional, Description: Mazak CNC lathe with chip conveyor Type: Mazak SQT 200 Control: MAZATROL PC FUSION 640T Year of manufacture: 1998 Machine number: 320140264 Bar feeder: KSF 60/S4 included in price Chuck: no longer available Chip conveyor: chip conveyor present X-axis: 190 mm Z-axis: 535 mm Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter through loader: 70 mm Max. swing diameter: 525 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 Operating/spindle hours: single-shift operation with 80% utilization Voltage: 400/230 V 50 Hz Control voltage: 230 V/24 V Bar loader: IEMCA TAL/AUTO 65/32 Serial number: 020417GA05 Max. bar length: 3,200 mm Min. bar length: 400 mm Max. bar diameter: 32 mm Min. bar diameter: 5 mm Bar loader weight: 850 kg Gisdpfxoyrrcts Aa Asr Overall height: approx. 2,000 mm Overall length: approx. 4,000 mm / 5,700 mm Overall width: approx. 1,800 mm Total weight: approx. 5,000 kg Location: Germany, 72622 Nürtingen near Stuttgart Delivery: Short-term possible by arrangement Freight terms: Ex works General condition: Used, very good, fully functional. From the user, first-hand, not a dealer, professionally maintained and serviced The machine can be inspected under power. All technical details are provided without guarantee.

Condition: used, mileage: 540,000 km, power: 331 kW (450.03 HP), first registration: 04/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,550 mm, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, trailer coupling, Color: Blue, permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 295/80 R22.5, 3rd axle: 295/80 R22.5, velour seats, air suspension, lift axle, retarder, digital tachograph, electronic braking system (EBS), electronic stability program (ESP), automatic climate control, adaptive cruise control (ACC), LED headlights, automatic driving light control, headlight range adjustment, Bluetooth hands-free kit, rain sensor, adjustable steering column, roof hatch, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, electrically adjustable curb mirror, wide-angle mirror, immobilizer, wind deflector, axle load indicator, hill start assist, LED daytime running lights, 1x 15-pin connector, coasting function, telematics system, SCR (Selective Catalytic Reduction), non-binding offer, subject to errors and prior sale. Illustration may not correspond to the actual offer. Gedpfx Asy Ablgoa Aoir

Condition: ready for operation (used), * Brand: Mogensen * Model: bar sizer * Type: VD 1026 * Surface: 1200 x 950 mm * Driving: 2 pieces vibration motors of each 0,95 kW * On stock: 1 piece. Giodoywm E Ujpfx Aa Asr

Condition: ready for operation (used), * Brand: Mogensen * Model: bar sizer Godpfx Aaoywm Ame Aeir * Type: SV 1526 * with: 2 decks * Driving: 2 pieces vibration motors of each 2,7 kW.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Giodpfxoy Ah Tks Aa Asr Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: ready for operation (used), * Brand: Mogensen * Model: Bar Sizer * Type: VX 2058 * Dim.: 6000 x 1900 mm * Execution: 5 steps * Bars: length 1000 mm, diameter 40 mm Ø, distance C.C: 100 mm Gisdpfx Aajywl R Ae Aor * On stock: 2 pieces

Condition: ready for operation (used), * Brand: Mogensen * Model: Bar Sizer Godpfeywl Rvex Aa Aeir * Type: VX 2558 * Dim.: 6000 x 2400 mm * Execution: 5 steps * Bars: length 950 mm, diameter 30 mm Ø, distance C.C: 36 mm