Used Bar Shelf for sale (15,650)

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: Dedey H Hkpopfx Ak Ajkw 01x Shelf panel, used Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: new, Year of construction: 2025, Economical L-Sealer for wrapping middle sized products in shrink film. Semi-automatic version (manual product feeding and sealing, automatic product outfeed). - Technical specifications: 220V, 1.2kW; compressed air not necessary; max. speed of the machine in neutral: 20 cycles/minute; max. product dimensions (mm): L450xW400xH300; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1560xW760xH1040; weight (net/gross): 125/175kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Dedsv Nlzgopfx Ak Aekw Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; max. product dimensions: unlimited length, 300mm width, 150mm height; weight (net/gross): 400/500kg; power: 220V, 2kW; air: 5.5 bar/0.1m³/min; L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Djdpfxev Nl Efj Ak Askw

Condition: good (used), Technical specifications for shelf panel: Racking system: SSI Schäfer Type: R 3000 Scope of delivery includes: shelf panels, used Material color: Sendzimir galvanized total width: approx. 1,295 mm total depth: approx. 790 mm for upright depth: approx. 800 mm height: approx. 40 mm number of reinforcement beams: 2 pcs Weight / pcs.: approx. 12.82 kg Currently available in stock: 1,338 pcs. Your contacts at our company: Mr. Andre Evering Dedpjwvq Epjfx Ak Aekw Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transportation or shipping of this item involves additional costs, which can be requested from us depending on the delivery location and/or scope of delivery.

Condition: used, empty load weight: 6,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, next inspection (TÜV): 09/2027, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer - Manufacturer: Magyar - Type/Model: Food tank, pressure tank, 2.0 bar - 30,000 liters - First registration: 09/19/2005 - Number of axles: 3 - Suspension: Air - Lift axle - Axle type: BPW - Brake: Disc - Length: 11532 mm - Width: 2550 mm - Height: 3610 mm - Unladen weight: 6800 kg - Next inspection date: 09/2027 - Body manufacturer: Magyar - Tank material: Stainless steel - Total tank volume: 30000 L - Tank compartments: 3 - Insulated - CIP cleaning Dodpfxoxtumce Ak Ajkw

Condition: ready for operation (used), functionality: fully functional, STAR SH-12 Control: Fanuc 21-T Device for unloading long parts Dodpfx Aexwugdek Askw Complete with IEMCA MINI BOSS 325 bar feeder

Condition: reconditioned (used), functionality: fully functional, Profile cutting center Scarabeo 55 CNC cutting center with 1 controlled axis, designed to cut PVC profiles with the highest cutting speed and quality. It consists of four different components connected in an automatic line: 1. Automatic bar stock magazine - steel body with 6 grippers moved by belts, driven by electric motors - max. capacity 8-10 profiles (depending on their width) - equipped with a bar presence detection device 2. Automatic Profile Feeding Unit 3. Automatic cutting unit - ø 500 mm blade - electromotor 3 kW, 2,800 RPM - cuts at three main angles: 45° – 90° – 135° - special centering device which allows the blade center of rotation to be positioned in the center of the profile section, so that wedge cuts can also be made automatically - equipped with a special evacuation system for waste and cutting chips - fully enclosed with a front door for free access to the cutting area for calibration, cleaning, and maintenance purposes - pneumatic pistol for blowing chips 4. Automatic unloading unit - automatic discharge device with pneumatic control - flat table for storing cut profiles - safety guard for moving parts Power: 7.2 kW Weight: 1,500 kg - Industrial computer - TFT color LCD screen - Keyboard - data retrieval from the keyboard or ON-LINE Dodjrungaopfx Ak Aokw - control of each function on the monitor - Virtually unlimited number of data on the profiles to be cut - label printer with choice of format and letter size - collection of data on the remains of cut profiles (waste) - the ability to collect statistical data (weekly and monthly report) - Automatic fault diagnosis Sizes: width: 2300 mm, length: 12500 mm Completely refurbished, 6 months warranty on parts. Ready for work Available for viewing at the company's headquarters.

Condition: new, Technical data on the shelf trolley: Manufacturer: LPR Type: 600 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x workbench stand, new Material color: blue Stand profile: 50 x 50 mm Stand height: 2,000 mm Stand depth: 600 mm incl. cross and diagonal struts, metal base plates, plastic Cover caps The uprights are pre-assembled (bolted framework) 06x workbench crossbars, new Material color: orange Design: stepped crossbar Truss profile: 80 x 50 mm Clear width: 1,450 mm Load capacity 300 kg with evenly distributed load 12x safety pins, new Dkedpeqzg T Uofx Ak Ajw Version: completely galvanized For securing the side rails against unintentional lifting out 03x chipboard or MDF II. Choice Chipboard thickness: 22 mm Chipboard width: 1,430 mm Depth of chipboard: 545 mm 02x double-stop swivel castors, new Castor dimensions: 125 x 37 mm Mounting plate: 105 x 80 mm Galvanized steel rim with hub and thread guard 02x swivel castors, new Castor dimensions: 125 x 37 mm Mounting plate: 105 x 80 mm Galvanized steel rim with hub and thread guard 08x machine screws: M 8 x 20 mm 08x nuts: M 8 08x washers: 8 mm - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), The scope of delivery includes: 198 used deep-web joists Material color: Sendzimir galvanized Total length: approx. 1,110 mm Suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Dksdpjlhp Tcjfx Ak Aew Profile dimensions: C 70 x 50 x 15 mm Crossbeam support: approx. 50 mm Weight/piece: approx. 3.02 kg Note: The unit price only applies to a minimum order quantity of 198 pieces (1 pallet).

Condition: used, Technical data for the connection plate: Manufacturer: META Type: META CLIP Djdpfxerntl Uj Ak Askw The scope of delivery includes: 01x connection plate, used Design: single Material color: sendzimir galvanized Total height: approx. 75 mm Total width: approx. 55 mm Material thickness: approx. 1.5 mm Weight per unit approx. 0.060 kg Currently available in stock: approx. 300 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Djdpow T Tfrofx Ak Ajkw Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Dkedpfxjw Uczxs Ak Aow Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: ready for operation (used), Year of construction: 2008, bar length: 2,100 mm, bar diameter (max.): 85 mm, overall weight: 1,000 kg, Bar diameter Ø 8-80 mm 7-65 mm Magazine capacity 270 - 320 mm (360 kg max) Minimum bar change time 27 sec Feed rate 150 mm/sec, adjustable Return speed 950 mm/sec Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 1000 kg Dkedew Iwi Repfx Ak Aew

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg Dkjdpjw Rfkbjfx Ak Ajw

Condition: used, Ingersoll Rand TS3A compressed air refrigerated dryer, 12 bar For sale is a used, professional compressed air refrigerated dryer from the manufacturer Ingersoll Rand – model TS3A, manufactured in 2008. Technical specifications: Dedpfoxl D Adox Ak Aekw - Max. air pressure: 12 bar (175 psig) - Max. air inlet temperature: 60 °C (140 °F) - Cooling system: Air-cooled - Operating voltage: 400V / 3Ph / 50Hz - Refrigerant: R404A (3.36 lbs / 1520 g) - Refrigerant oil type: ISO 32 Polyol Ester (POE) - Power consumption: 4.8 kW - Weight: 230 kg Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), volume flow: 0.74 m³/h, pressure (min.): 10 bar, Exhibition machine includes 2 x 90-liter pressure tanks / galvanized includes refrigerant dryer includes automatic condensate drain includes oil-water separator includes microfilter includes sub-microfilter Rated power 5.5 kW Delivery rate at 10 bar: 0.74 m³/h Dimensions (W x D x H): 980 x 755 x 1257 mm approx. 300 kg Dkjdpfx Aoxq Elwok Aow

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Djdpfx Akezqglle Askw Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, shelf length: 2,700 mm, load capacity: 600 kg, frame height: 9,000 mm, Jungheinrich MPB pallet racking – over 1,000 frames and several thousand beams We offer for sale a very large quantity of used Jungheinrich MPB pallet racking. Available components: Frames: heights from 3000 mm to 10,000 mm, over 1,000 units, various height and load-bearing capacity options. Beams, 2700 mm long: load capacity 3 x 500 kg, load capacity 3 x 600 kg, load capacity 3 x 800 kg. Beams, 3600 mm long: load capacity 4 x 500 kg, load capacity 4 x 600 kg. A total of several thousand beams are available, allowing for the preparation of both individual racking rows and complete warehouse installations. Dodezrnnkopfx Ak Aekw It is possible to purchase entire batches or selected quantities. Upon request, we will prepare a configuration tailored to the warehouse height, the type of pallets, and the required number of pallet spaces. We also offer: dismantling and assembly of racking, transport, preparation of a layout plan, selection of additional components and safety features. Please contact us to obtain a detailed offer, an up-to-date list of available components, and photographs.

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Dkedpfx Akozpbq Hj Aew Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Djdpfszpxx Ijx Ak Ajkw Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Dkedpszxr Dcofx Ak Asw Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: new, Year of construction: 2025, Safo DNAA 160 Finished product diameter 40-160 mm New machine tool. Dkedpfszxhatjx Ak Asw

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Dkedpszk E Irsfx Ak Asw Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Condition: used, mileage: 261,292 km, power: 155 kW (210.74 HP), first registration: 02/2016, fuel type: diesel, overall weight: 7,499 kg, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, number of seats: 2, total width: 2,550 mm, total height: 3,560 mm, loading space volume: 30 m³, loading space length: 5,080 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 821 Walther Body VIN: 028937 Chassis / Components: * Wheelbase: 3,560 mm * Leaf / Air suspension * Tires: 215/75 R.17.5 * Remaining tread depth: Front approx. 60%, Rear approx. 60% * Diesel tank // Plastic * 1 x Ad-Blue tank Dedpoz Al Szsfx Ak Aokw * LBW-Bär BC 1000 S4 - A4 Cab: * Classic Space S * Storage compartment above the engine tunnel * 2 seats * Air conditioning * Radio CD * USB, Aux * Camera * Lane keeping assist * Roof hatch Body: * Walther flatbed // side curtain * Cargo area: 5.08 m x 2.48 m x 2.38 m, approx. 30 m³ * Aluminum slats * Tie-down points * 6 x cargo securing rails embedded in the floor * 9 x bars for cargo securing * LBW Bär BC 1000 S4 - A4, 1,000 kg load capacity, year 2016 Engine / Transmission: * 210 hp / 155 kW // 5,132 ccm // Euro 6a * Automatic transmission * Engine brake * Differential lock Weights: * Gross weight: 7,490 kg * Unladen weight: 5,710 kg * Payload: 1,780 kg Other: * 1 previous owner * German vehicle * Valid TÜV (technical inspection) ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and reliability. Since we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day licenses / export license plates We will gladly help you obtain export/temporary license plates. Handling customs formalities We will gladly help you with handling customs matters.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Dkodpszznuvofx Ak Aow Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890