Used Bar Streightener for sale (13,927)

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- Nwodpfehf Naksx Aiujk CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Nwedpfohui D Eex Aiuok The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 100.000 Liters Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - Filling pipe 3" with TW closure - Gauge pipe 1" with gauge rod - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent connection 2" with vent cap. The tank is factory-equipped with the above-mentioned fittings and is cleaned internally. Capacity: 80,000 liters Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg The tank can be repainted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will promptly receive the exact freight costs. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 Nwedjhvidgepfx Aiusk 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Nwedpek H Ic Ujfx Aiuok Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 Nwsdoi E Hz Topfx Aiusk equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Nwedom E Im Topfx Aiuek Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler Njdpfx Aisnp Hwkouowk ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: good (used), Hobart H600 Planetary mixer Planetary mixer, 60L stainless bowl, whisk attachment, variable speed, with timer, 3Ph Nwedpfx Aenxlwqoiuok

Condition: new, Included in delivery are 100x double web closure, brand new for 35 mm webbing Material color: sendzimir galvanized Total length: approx. 83 mm Total width: approx. 54 mm inner width: approx. 35 mm material thickness: approx. 4,00 mm breaking load: 1.600 Kg Nwedpfjpuz I Sox Aiusk Weight | Piece: 0,090 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Rexroth SR 8 3842998020 swivel arm robot SN: 4810354, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nwjdpfeqb Tdbox Aiuok

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, total length: 2,400 mm, total width: 1,200 mm, Perforated table 1200 x 2400 x 200mm thickness of the table top 20 mm, diameter of the holes 28 mm with wireless remote control Swivel range 360° Height adjustment Hydraulic motor 800 to 1200mm Nwodpfst U Rccsx Aiujk Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment

Condition: used, Year of construction: 1996, Technical details: length: 4000 mm width: 800 mm height over floor: 400 mm Payload: 3,0 t dimensions L x W x H: 4,1 x 0,8 x 0,41 m weight: 0,153 t Several of these "long material trailers" are for sale in Leipzig. The trailers can be coupled together. The drawbar/trolley jack is charged separately, if required. Single axle operation with rigid axle. Solid rubber tires, track spacing = 590mm Sale individually but also in a package from 5 pieces possible. Price on request. i.D. Nsdju Nv Syopfx Aiuewk *

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Nwodpfsd Ix I Ajx Aiuek Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 Nwjdpfxjc Rwcte Aiuok -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min Nwsdpfxoc Umfto Aiuok infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: new, 🚀 Modular powder coating systems with rod transport system Nwedpsdy Ezdofx Aiuek Our modern coating systems with rod transfer systems offer maximum flexibility while minimizing space and energy consumption. All process steps – from pretreatment to oven drying – can be implemented in a continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Curing and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-driven Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic and walk-in coating booths The movement is fully automatic with a continuously variable drive, which enables precise control of the cycle times. 🏗️ Structure & components: Single-rail conveyors for longitudinal movement Transverse guide units for changing direction Movable carriages with product holders Supporting steel structure for permanent load Control via control panel with speed regulation ⚙️ Efficiency through well-thought-out design The system allows for non-contact handling – the workpiece is hung onto the loading station and remains in the same position until it is removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated rod lifting device enables ergonomic and safe working with heavy parts. The staff can position the lifting rod precisely by pressing a button (raise/lower) – ideal for large components. ✅ Your advantages at a glance: Fully automatic material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfectly suited for modern coating processes where flexibility, ergonomics and efficiency are the focus. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner; Nedpfxsfdkb Ej Aiujwk  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Nwjdpfx Aieff Hdpjujk Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: refurbished (used), Fire water tank according to DIN 14230 (underground fire water tank): 100,000-liter fire water tank for underground storage, single-walled, 1 manhole DN 600 with blind cover including gasket and screws, with bitumen insulation on the outside - used - Nodefn Rddopfx Aiuswk Tank volume: 120,000 liters / 120 m³ Length: approx. 16,500 mm Diameter: approx. 3,100 mm Weight approx. 3,100 kg Material: Steel material S 235 JRG 2 The tank has a fire water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in form B, without a dipstick. Furthermore, the tank has a ventilation flange with a cap, in NW/DN 100, with a total length of approx. 1,300 mm, suitable for 800 mm of earth cover and 500 mm above ground. - The tank has been emptied, cleaned, and factory-coated with a bitumen exterior finish. Upon request, we can equip the tank with an internal full coating based on bitumen (for corrosion protection) or an epoxy resin internal coating. We would be happy to offer you a cost-effective delivery with our own truck. Simply let us know the delivery address, and you will promptly receive the exact freight costs. An inspection is possible at any time after prior arrangement. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers; please feel free to contact us. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000 liters.

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning 1 set of chuck jaws consisting of base jaws and soft step jaws for turning - central adjustment Weight: 11 kg Njdpfx Ajf Axpreiuswk Good condition

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting Njdpef A Nqqjfx Aiuowk • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: new, mileage: 30 km, power: 129.45 kW (176.00 HP), first registration: 09/2025, fuel type: diesel, empty load weight: 3,800 kg, maximum load weight: 3,400 kg, overall weight: 7,200 kg, wheelbase: 5,100 mm, next inspection (TÜV): 09/2027, fuel tank capacity: 115 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 36 m³, loading space length: 5,750 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, spoiler, summer tires, tail-lift, traction control, trailer coupling, truck registration, EU vehicle with warranty. Curtainsider vehicle L-5750 x W-2450 x H-2500 mm, 14 Euro pallet spaces, Tail lift BÄR BC 1000kg, platform 1800 mm Payload approx. 3400kg, IVECO air suspension, Tow hitch, 6-speed manual transmission, Sliding curtain left and right, Aluminum body, Cabin parking heater, Tachograph, Sleeper cab, 115L tank, Automatic climate control, HI Connect CD/MP3 car radio + Bluetooth NAVI EUROPE Radio remote control on steering wheel, Roof storage compartment, Spare wheel, Hydraulically suspended driver's seat, Floor covered with anti-slip surface, Nedpsr Nvlljfx Aiuowk Subframe made of aluminum, Large exterior mirrors, Aluminum insert slats, Outline lighting, Load securing lashing eyes in the floor, Prepared for customs cable, European COC, - Delivery, leasing or financing possible. - Available in approx. 2 months. Contact us: Auto-Wardenga Irenäus Wardenga

Condition: new, load capacity: 2,500 kg, Special price Nwjdpotynf Tefx Aiuok Swivel range 360°, one side driven, one side rotating Height adjustment Hydraulic motor 800 to 1200mm Distance as required, can be converted with very little effort, the middle section can be removed (pictured 2.4 meters) Speed 0.5 rpm. Motor power 0.75 KW We offer the machines in many sizes and load capacities: Load capacity 1 ton, 2 ton, 3 ton, 5 ton also suitable for conversion without floor middle section

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Steel bar shears make Schubert, type STS 100 Used, very good condition Technical data: Shearing force/diameter (max.): 1000 kN/52 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop 650 mm, safety device Nwsdpfetukqqox Aiuek

Condition: used, Year of construction: 1999, diameter 3 - 16 mm Nwedpfxstqqp Io Aiuok length 3000 mm = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø