Used Barb Wire Machine for sale (92,903)

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Dedpjwlq Hlsfx Ah Uecp Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dcodpfx Ahjuuz Iie Ujp Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m Dedjvc Aklspfx Ah Uecp dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 2009, operating hours: 3,641 h, functionality: fully functional, machine/vehicle number: 09N12011, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,706 mm, total width: 2,706 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 550 mm, overall weight: 2,500 kg, table length: 650 mm, We are selling a Mitsubishi NA1200 Advance wire EDM machine. The machine was in operation in our single-shift production until recently and can be inspected under power. Dcjdpfx Aexm Rl Ioh Uop

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Viewable at our Semsales premises from mid-June. Dcedpfx Ajwmw I Soh Usp

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 1200 kg Control Unit Brand FANUC Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Y-Axis Movement 220 mm Z-Axis Movement 255 mm V-Axis Movement 120 mm U-Axis Movement 120 mm This 5-axis FANUC Robocut alpha-0iC was manufactured in 2006. It features X-axis movement of 320 mm, Y-axis of 220 mm, and Z-axis of 255 mm. It can handle workpieces up to 500 kg and has a machine weight of 1200 kg. Consider the opportunity to buy this FANUC Robocut alpha-0iC wire edm machine. Contact us for more information about this machine. Dcedpfexf N Rmox Ah Uep Application Types EDM

Condition: used, Year of construction: 2017, X = 600 mm Y = 400 mm Dodpfjwzu Hbjx Ah Uecp Z = 310 mm incl. cooler

Condition: used, Year of construction: 1998, EDM machine Charmilles Robofil 4020 SI, year 1998. Unfortunately, the machine is no longer connected to power. Dedjw E Evujpfx Ah Uscp

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Djdpfxsu Ic Hns Ah Uscp Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control Dsdpfowz Iuxex Ah Uocp - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: excellent (used), Year of construction: 2002, operating hours: 34,000 h, functionality: fully functional, Agie Excellence 2F, year 2002. Machine in excellent condition. Can be inspected at our premises in Semsales, Switzerland. Dcedpfjw N Tazex Ah Ujp

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Dsdpfx Ahjxf N Rtj Ujcp Main Drive Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 370 mm Z-Axis Movement 310 mm V-Axis Movement ±60 mm U-Axis Movement ±60 mm Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT alpha-1iC wire EDM machine was manufactured in 2006. It features X-axis movement of 550 mm, Y-axis movement of 370 mm, and Z-axis movement of 310 mm. It can handle workpieces up to 1000 kg and has a machine weight of 3000 kg. Consider the opportunity to buy this FANUC ROBOCUT alpha-1iC wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. * Dodpfxeuzbays Ah Ujcp

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Dcsdoxnx Itopfx Ah Uop Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Price per piece Dodsv Nv Dlspfx Ah Uecp A reel is available if needed.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Description: ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. Djdpfxjxm Tq Ho Ah Uocp ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: ● Original Purchase Value (This Unit): 160 000 EUR. ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 690 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 222 mm, total length: 300 mm, total width: 185 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, type of input current: three-phase, overall weight: 2,850 kg, Equipment: cooling unit, GF CUT E 350, year 2022. Machine like new, only 685 hours of operation (upgradable). Available in our Semsales workshop at the end of February. Djdpsvvld Isfx Ah Ujcp

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2722 kg Control Unit Brand MITSUBISHI Dodoxgwddjpfx Ah Uocp Model M800 Main Drive Number of axis 5 This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Dsdpfx Aoxnpmgsh Uscp

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Djdpfx Aerqfxweh Ujcp

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Dcodpfx Aev Rbxwsh Ujp Viewable at our Semsales premises in Switzerland.

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Dcsdpfx Ahexfcpve Usp Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Dodjxnpkxepfx Ah Uocp

Condition: refurbished (used), Year of construction: 2012, operating hours: 24,760 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 220 mm, total width: 200 mm, type of input current: three-phase, empty load weight: 2,450 kg, GF CUT 200 MS, year 2012. Excellent condition, the machine will be cleaned, revised and tested. Option 0.1 mm. Available in our workshop in Semsales during March. Dcedpevvlhysfx Ah Ujp

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Sold as is or revised on request. Dcodpfx Ahsv Im R Tj Uep Machine visible in our premises in Semsales in Switzerland.