Used Barb Wire Machine for sale (66,138)

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Crsdpfxo Ahklmj Aktsi

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit Cjdo Abal Rjpfx Aktjri • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Cjdpfszhvhwsx Aktsri Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: like new (used), Year of construction: 2018, Technical data: Travel ranges (X/Y): 300 / 200 mm Travel range (Z): 350 mm Diagonal travel range (W): 200 mm Table size: 350 x 250 mm Max. workpiece height: 180 mm Max. workpiece weight: 150 kg Electrode diameter: 0.2 – 3.0 mm Credo Afbykspfx Aktji Dimensions (length x width x height): approx. 1100 x 1100 x 2000 mm Machine weight: approx. 0.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: ±21º / 100 mm Machine weight: 3700 kg Cedoza Eppspfx Aktsri Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Crsdpozrfpxefx Aktji Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) Csdpowz Iuxefx Akteri - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Pinch roller Chiller Spare motor for U/V axis

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Cjdpfs Ah D U Aox Akteri Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm (including KIT 70) Wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for comfortable setup Including AGIESETUP 3D Including automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has already been completely cleaned, overhauled, and thoroughly tested. You will receive a 6-month warranty on the machine. We would also be happy to perform an individual test for you on the CUT 3000. Includes operator training at Techma on your overhauled machine. We would also like to offer you the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Crsdpfozncqlox Aktei Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM Crjdey Twg Ujpfx Aktji WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2016 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup Cjdpfxs Aaz R Ee Aktjri AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility after the order is received. You will receive a 6-month warranty on all machine parts. We would also be happy to offer commissioning and training.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF AgieCharmilles CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.02 mm to 0.20 mm (including optional KIT F20) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Crodpfxsz I Ni Ss Aktsi Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, overhauled, and thoroughly tested by our specialists. We will gladly commission the machine at your facility and provide training on the control system and machine operation.

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Cjdpfx Aez Affnekteri Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Crjdpez Hzz Djfx Aktsi

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Cjdpfxjz Uwf As Akteri Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Cedpoz Et Rujfx Akteri Before purchasing, it is possible to verify the completeness of the equipment.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm Crodoz Az Uvspfx Aktei - Power supply: 3-phase AC 220V (50/60Hz)

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Cjdpfx Aoz Sp Udsktjri Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. Crjdpfezymynjx Aktji This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Max. workpiece weight: 500 kg Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on. Credpfxezvd Sae Aktei

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Credpfx Aswww Sxjktoi Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2005 Charmilles Millenium control system Csde Ahw Adepfx Aktsri Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and overhaul the machine and test all functions. You will receive a 6-month warranty on the machine. We would be happy to offer you the commissioning of the machine.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, AGIE CHARMILLES CUT 20 CNC wire erosion machine Manufacturer: GF AgieCharmilles Model: CUT 20 Year of manufacture: 2008 Control: AgieCharmilles CNC control Machine type: CNC wire erosion machine Travel ranges: Crodpfxoz Rz D Ij Aktji X-axis: 350 mm Y-axis: 250 mm Z-axis: 250 mm U/V axes: ±45 mm Working area: Max. workpiece dimensions: 900 × 680 × 250 mm Max. workpiece weight: 400 kg Max. taper angle: ±25° at a workpiece height of 80 mm Wire erosion system: Wire diameter: 0.15–0.30 mm Automatic wire threading Machining in a water bath Dielectric fluid: Deionized water Wire speed: approx. 30–330 mm/s Machine data: Connection voltage: 380 V / 50 Hz Machine weight: approx. 3,000 kg Machine dimensions: approx. 3,000 × 2,100 × 2,300 mm (L × W × H) Equipment: - CNC control AgieCharmilles - Automatic wire threading - U/V axes for taper machining - Dielectric fluid and filter system - Wire collection container - Handheld control unit According to the previous owner, the electronics have been extensively refurbished, with work carried out by Charmilles technicians.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS Cedpfx Akey Twkaetsri POSSIBILITY OF PERFORMING A TEST CUT

Condition: used, Year of construction: 1970, für MK3 Cedpfxeztfzds Aktjri weight of the machine ca. 4 t