Used Beam Profiler for sale (9,538)

Condition: new, number of rollers: 3, shaft diameter: 50 mm, – Shaft diameter: 50 mm – Digital display Nedpfx Aez Dquuofuodb – Forward and reverse operation – Can be used horizontally and vertically – Foot pedal control – Emergency stop – Documentation – 400V

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Ndjdpfezxw E Ejx Afuob Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm Nodpfx Ajztaq Tjfujdb - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Ndsdpfx Aoxyu Itjfuob

Condition: refurbished (used), Year of construction: 1992, punching force: 40 t, Mubea / Muhr and Bender MIW 400: - hydraulic profile/bar shear with hole punch and notcher - Punching force 40 tons - Activation via foot switch - Quick-change device for hole punch - completely overhauled Punches up to: Ø 30 in 10 mm Ø 20 in 15 mm Cuts up to: Round: Ø30 Square: 28 x 28 mm Angle: 80 x 8 mm Flat steel: 100 x 15 mm / 150 x 10 mm Special tools and fixtures on request. Ndjdjrynzgopfx Afusb Trade-in of used machines. Europe-wide delivery possible.

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm Ndedpfx Afszrvcceusb - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: good (used), Technical data for the frame profile: Shelving system: Stow Type: Pallet rack NS Included in the scope of delivery: 1x Frame profile, used Material color: RAL 5015 blue Frame type: PLFB 155 Frame profile dimensions: 100 x 65 x 2.25 mm Frame height: 3,100 mm Nsdpfxezxc A Ne Afuodb Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 1966, functionality: fully functional, spindle diameter: 30 mm, table width: 125 mm, We are selling 6 WEINING thickness planers. We are also selling a feed device to be used with the machines. The machine has an exceptionally robust cast iron housing. It is a very well-maintained and fully functional machine. Nedpfx Afjz Eunhjuodb

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail Nsdpsy H I Trefx Afujdb — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: Ndedpszwg Rzsfx Afuob *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, UV drying system for slats, profiled wood, and parquet Manufacturer: Cefla Type: TLFP Year of manufacture: 2005 UV drying tunnel for the continuous UV curing of paints and coatings using high-intensity ultraviolet lamps directly in the production line Passage width approx. 350 mm Passage height approx. 90 mm 1x adjustable UV lamp from above, left, approx. 80-120 W/cm Njdsz A T T Rjpfx Afuodb 1x adjustable UV lamp from above, center, approx. 80-120 W/cm 1x adjustable UV lamp from above, right, approx. 80-120 W/cm 2x pivoting UV lamps from above 1x UV lamp from below Dimensions approx. 5000 L x 1600 W x 2400 mm H (with fan) Weight approx. 1500 kg Connected load approx. 42 kW

Condition: good (used), Year of construction: 1990, machine/vehicle number: 4061359390114, Offer 26234 Hydraulic combination profile steel shear with hole punch Technical data: - Sheet metal and flat steel shear, blade length 200 mm - Cuts flat steel up to 150 x 15 mm - or up to 190 x 10 mm - Profile bar steel shear - Cuts: - Angle steel up to 100 x 10 mm - Round steel up to 32 mm - Square steel up to 30 mm - Notching device with three-sided notching tool - Hole punch - Punching force 500 kN - Stroke 10 to 28 mm - Outreach 155 mm - Punches holes in steel up to 27 mm diameter in 14 mm - or up to 31 mm diameter in 10 mm - Drive 400 V / 4 kW - Including: - Foot switch - Electrical contact stop - Various hole punches with dies - Space requirement approx. W 650 x H 1750 x D 960 mm Ndodpfx Afoz Df I Aousb - Weight approx. 850 kg

Condition: new, Year of construction: 2026, Cabinet Sandblasting Machine KDP350TOP PLUS is an advanced technological device designed for precise abrasive blasting operations. Its construction has been developed for demanding users in the industrial, automotive, metalworking, and restoration sectors. Thanks to the top-opening chamber and side openings for long components, this model enables efficient cleaning and surface finishing of profiles, frames, and parts with unusual dimensions. It is an ideal sandblasting cabinet for wheels, metal components, and machine parts. Main advantages of the machine Large 330-liter working chamber – allows processing of medium and large components. Top-opening chamber – simplifies loading of elements with non-standard shapes or lengths. Side openings – provide convenient access and comfortable operation with longer parts. Dust-free operation system with two dust extraction connections and sealed gaskets. Ndjdpfx Asm Nccisfujb DC15 cyclone dust extractor included – effectively removes contaminants from the working chamber. Efficient operating pressure range of 4–8 bar and air consumption of 400–700 l/min – ensure effective blasting performance. Blasting gun with ceramic nozzles – high wear resistance and compatibility with various abrasive materials. Construction and technology The KDP350TOP PLUS cabinet sandblasting machine features a robust construction made of thick steel sheet, powder-coated for increased corrosion resistance. The upper door is equipped with telescopic cylinders, making it easier to open even when handling heavier components. The tightness of the cabinet is ensured by rubber perimeter seals, preventing dust and abrasive material from escaping outside the working area. The bottom abrasive discharge system allows quick and convenient replacement of blasting media. Precision and work efficiency Thanks to the wide operating pressure range and the ability to use various abrasive materials, the CORMAK KDP350TOP PLUS sandblasting cabinet provides uniform and precise cleaning of metal surfaces. The large viewing area of 580 × 270 mm and integrated workspace lighting enable accurate control of the blasting process, even when working with complex-shaped components. It is an excellent solution for workshops requiring repeatable and professional surface treatment results. Standard equipment DC15 cyclone dust extraction system Foot pedal for airflow control Working area lighting – 12V fluorescent lamp with 230V power supply 2 integrated, wear-resistant rubber working gloves 2 dust extraction connections: Ø63 mm and Ø90 mm Sandblasting gun with 8 replaceable ceramic nozzles 4 protective visor films Front door with rubber seals User manual in Polish Technical specifications – KDP350TOP PLUS cabinet sandblasting machine Parameter Specification Working capacity 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick connector Viewing window area 580 × 270 mm Side opening dimensions 200 × 180 mm Dust extraction connections Ø63 mm and Ø90 mm Internal cabinet dimensions (W × D × H min/max) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Nodpfez Ark Rsx Afusdb Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Ndedpez Da R Sjfx Afueb

Condition: new, shaft diameter: 50 mm, – Shaft diameter 50 mm Ndjdjz Ai R Ijpfx Afueb – Upper roller hydraulically adjustable – Digital display – Can be used horizontally/vertically – Foot-operated control – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2026, - Minor transport damage (small dent on the control cabinet, see photo) Nedpfjz Aiutsx Afusdb - Shaft diameter: 60 mm - The two lower rollers are adjusted hydraulically - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimensions 2,240 x 880 mm, motorized height-adjustable counter supports, 4 pressure beams, individually switchable on and off, 4 swing grids, available from Seevetal location, sold "as is" and as inspected, Ndedoul Uy Hjpfx Afusb Ex works, excluding transport, subject to prior sale.

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Nedpju Rv Uqefx Afusdb Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Ndedpfx Aey Nk Dfefuob Second flexible pusher: yes

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Nedpewuck Isfx Afuodb

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Nodpfxjwuucij Afujdb

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Ndjdpfx Aowuz Dyefuob Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm Ndedjygtbmspfx Afusb No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Nsdpfx Aoiiiuyjfusdb Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 6 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes