Used Beam Saw Line for sale (18,964)

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Kdodpfozylxiox Ap Deu Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness Kdsdpfx Aoyyd Tnep Dou 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Kdsdpfx Aswuzzrsp Dju Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. For more information or to arrange viewing feel free to contact us. Kdodpfemk S S Esx Ap Dsu

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm Kodpfx Aofv Hphsp Dodu ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Kdedox A Tbwopfx Ap Dsu Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Kdjdpfx Apoz Ni S Do Dou Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Kjdpfeztaufex Ap Dodu

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Kdjdpswuz Dgofx Ap Deu

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Kdjdpfx Aozp Nt Ajp Deu Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment) Kdjdpfxoi Akrkj Ap Deu

Condition: excellent (used), Year of construction: 2007, Striebig Panel Saw Compact 6220, year of manufacture 2007 Solid, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting precision Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 hp) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Kodpfx Apjz N Igas Djdu Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 5600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 6220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Kodpsz Im Skefx Ap Dsdu Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw Kdjdpfx Apsv I Dmle Dou TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Pitch circle of drive pin: 45 mm Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, or timeliness of this information.

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Kdsdjk H Ic Uepfx Ap Deu The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 Kdsder Elmwepfx Ap Dju With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Heavy-duty, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Super Silent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight: approx. 910 kg Cutting depth: 60 mm Saw motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Saw blade bore: 30 mm *1 Emission sound pressure level at the workstation LpA: 82 dB *2 Saw blade speed: 5250 rpm 2 extraction ports: ø 100 mm Connection value: 4.8 kW Mains connection: 3 x 400 V / 50 Hz Kdsdpjihahbofx Ap Dju Cutting range: L: 4600 mm; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - VSA scoring saw, stepless adjustment - Strip stop - Mechanically braked support rollers - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Photo shows optional digital display, which is not included in the offer.

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° Ksdpfx Apjyxxzws Dodu - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (manufactured in 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 2160 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Kjdpfxszpbcve Ap Djdu Cutting area: approximately 5300 mm in length 2160 mm in height Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. The machine operated flawlessly until it was disassembled; all parts, as shown in the pictures, have some signs of wear and tear. Location: in storage at 54634 Bitburg.

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available - Kdedpfxeg U Uv Ro Ap Dou

Condition: new, Year of construction: 2024, EVOLUTION – Perfect combination of precision, ergonomics, and functionality. Automatic functions, such as automatic locking and swiveling, or automatic raising and lowering of the sawing unit, significantly simplify your daily work. Benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect execution of your orders in every detail. Comprehensive standard equipment: 12" touchscreen computer with optimal user guidance Laser-assisted display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with cut detection Automatic locking and swiveling of the sawing unit Kjdpshf Dqbsfx Ap Djdu Automatic raising and lowering of the sawing unit Automatic fine adjustment of the sawing unit Operating hour counter Tool database Aluminum center support across the entire machine length Integrated, high-performance TRK dust extraction. Dust limit value of 1mg/m³ Control cabinet mounted directly on the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw with infinitely adjustable speed Free-standing support, complete Paper holder High-end grid made of synthetic materials Small parts support, aluminum, complete UPS 24 VDC for touchscreen PC – uninterruptible power supply Saw weight: approx. 1,100 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at the workplace LpA: 83 dB *3 Saw blade speed: 4800 rpm 1 dust extraction port: ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.5 kW Mains connection: 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting area in mm: Type LS HS (vertical) HS horizontal 6224 5300 2240 2100 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Saw frame, round timber: 250 mm Kdjdpshkz Hiofx Ap Dju Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Condition: used, Gainsborough bagger and All-Fill powder depositor. Kjdpfx Aovvpphjp Djdu

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: - Cutting height: ~ 145 mm - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic - Rip fence: Manual Kjdpszrywwjfx Ap Djdu

Condition: used, Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Kdedpfx Apeztvyqo Dsu Technical data: - Cutting height: max. approx. 120 mm - Cutting width: max. approx. 600 mm - Roller table: 250+360 cm - Feed: Pneumatic