Used Belt Grinding Machine for sale (69,228)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device Gedpfxjxabf Ee Am Esbw - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad Gsdpfjyv Nb Nox Am Eobw

Condition: good (used), Year of construction: 2012, operating hours: 9,500 h, functionality: fully functional, Ziersch ZT48 surface grinding machine, manufactured in 2012 - Electro-permanent magnet, manufacturer SAV - Grinding area: 900x500 mm - Magnetic plate: 800x400 mm - Air holes in the table for easy lifting of workpieces - Dressing station on the machine table - Cooling system with belt filter system and upstream magnetic separator - Flood coolant system - Dressing cycles - Hydraulically cooled Gbjdo Ai Hwmepfx Am Eow - Partial enclosure - Emulsion mist extraction system

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t Gsdpfxeupxm Ej Am Ejbw dimensions 0,97 x 0,67 x 0,37 m This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 5277, grinding length: 600 mm, grinding width: 400 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,500 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 6 W, input voltage: 400 V, Equipment: documentation/manual, • Manufacturer: ABA-Werk (Aschaffenburg) • Model: FF 600/40 Gedpfxe Akddwo Am Ejbw • Grinding length: approx. 600 mm • Grinding width: approx. 400 mm • Grinding wheel speed: up to approx. 2,800 rpm • Drive power: max. approx. 11 kW • Operating voltage: 400 V (three-phase) • Table speed (continuously variable): approx. 2 to 30 m/min • Machine weight: approx. 1,700 to 1,800 kg •

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Gbodpfszvn Ursx Am Eow Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Feed devices: 1 Positioning of feed device: Manual Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.

Condition: new, Year of construction: 2024, width of the strips 75 mm Gedpfx Aovcrnaem Esbw band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,084 t dimensions of the machine ca. 1x0,5x1 m New device

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Belt sander with - Contact disc: 600 x 75 mm Gjdeupxg Espfx Am Esbw

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, grinding belt width: 75 mm, grinding belt length: 2,000 mm, grinding belt speed: 30,000 mm/s, total height: 1,205 mm, total length: 956 mm, total width: 581 mm, overall weight: 110 kg, grinding width: 75 mm, warranty duration: 12 months, Universal belt grinder UTBS-75 Gedpfx Amjx N Sv Ao Esbw

Condition: new, The bSander 75.200 & 150.200 are machine grinders used for grinding the front faces and end profiles of tubes, for edge grinding, and for face grinding on the upper surface of the machine. bSander 150.200: Belt dimensions: 150 x 2000 mm Belt speed: 29 m/s Motor power: 4.0 kW // 3 x 400 V // 50 Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg ---€900 net until the end of week 15--- bSander 75.200: Belt dimensions: 2000 x 75 mm Belt speed: 29 m/s Motor power: 3.0 kW // 3 x 400 V // 50 Hz Dimensions (L x W x H): 700 x 490 x 1130 Weight: 72 kg Price upon request. Gedpfx Amjd Dp Aae Ejbw

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle Gjdjxabp Dopfx Am Eebw - Separate off button - Machine base

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers Godpfxegxug Es Am Esbw With top roller for free belt grinding

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 1,200 mm, grinding width: 500 mm, total height: 2,540 mm, total length: 4,250 mm, total width: 2,270 mm, rapid traverse X-axis: 20 m/min, travel distance X-axis: 1,350 mm, grinding spindle speed: 1,500 rpm, power: 7.5 kW (10.20 HP), For sale is a PROTH PSGC-50120AHR surface grinding machine. The item is in good condition. Working area & travel distances: Max. travel (cross x longitudinal): 560 x 1350 mm Grinding area / table surface: 500 x 1200 mm Max. distance from spindle center to table surface: 700 mm Max. height from table surface to the bottom edge of the standard grinding wheel: 522 mm Godezb Er Hspfx Am Esbw Axis movements & feeds: Longitudinal movement (X-axis): Table speed (hydraulic): 1 – 25 m/min Cross movement (Z-axis): Intermittent cross feed (electromechanical): 0.1 – 15 mm/feed Continuous cross feed (rapid traverse): 2000 mm/min (at 50 Hz) / 2400 mm/min (at 60 Hz) Handwheel feed per revolution: 5 mm (scale division: 0.02 mm) Vertical feed (Y-axis): Rapid traverse (optional/equipment): 200 mm/min Handwheel feed per revolution: 0.25 mm (scale division: 0.002 mm) Grinding spindle & grinding wheel • Grinding wheel dimensions: 355 x 50 x 127 mm • Spindle speed (50 Hz / 60 Hz): 1500 / 1800 rpm • Spindle motor: 7.5 kW (optional 11 kW) / 10 HP Transport dimensions & weights: Machine weight (net): approx. 6,100 kg Machine weight (gross/transport weight): approx. 7,500 kg Transport dimensions (L x W x H): 4.25 x 2.27 x 2.54 m Hydraulic motor: 3.7 kW / 5 HP

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER Gbjdpey Du N Ujfx Am Esw

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW Gbodpfxsxaa Swo Am Esw weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EB1507, grinding length: 600 mm, grinding width: 350 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,900 mm, workpiece weight (max.): 320 kg, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, table load: 320 kg, type of input current: three-phase, grinding wheel width: 25 mm, overall weight: 1,700 kg, grinding spindle motor power: 2,200 W, travel distance X-axis: 700 mm, travel distance Y-axis: 490 mm, travel distance Z-axis: 340 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,500 rpm, input voltage: 400 V, Equipment: documentation/manual, - Factory number: EB 1507 - Automatic vertical feed - Headstock adjustment - Belt filter system - Coolant system - Machine light Gbjdpfx Amszrinle Eow Grinding length 600 mm Grinding width 300 mm Workpiece height 312 mm Table size 600 x 300 mm Maximum workpiece weight 320 kg Distance grinding spindle center - table 490 mm Table travel, longitudinal 700 mm Table travel, transverse 340 mm Table feed rate 1 - 25 m/min Speed range - grinding wheel 1500 rpm Drive power - grinding motor 2.2 kW Grinding wheel dimensions 355 x 25 x 127 mm Magnetic chuck 610 x 305 mm Headstock adjustment device Operating voltage 400 V Total power consumption 3.0 kW Machine weight approx. 1.7 t Space requirement approx. 1.90 x 1.90 x 1.90 m Hydraulic unit 0.60 x 0.35 x 0.75 m Coolant system 0.70 x 0.40 x 0.80 m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 29,156 h, functionality: fully functional, machine/vehicle number: 202385, clamping force: 1,000 kN, injection pressure: 2,500 bar, ejector force: 40,000 N, ejector stroke: 175 mm, plate length: 570 mm, plate height: 570 mm, total length: 4,301 mm, total width: 1,592 mm, total height: 2,069 mm, overall weight: 3,650 kg, Used ARBURG ALLROUNDER 420 C GOLDEN EDITION injection moulding machine, manufactured in Germany in October 2006. The GOLDEN EDITION belongs to ARBURG's established range of hydraulic injection moulding machines, designed for reliable and precise processing of thermoplastic materials. Gbsdpfe Ai R Nuex Am Eew A versatile 100-tonne machine suitable for manufacturing technical plastic components and a wide range of injection-moulded products. Transport belt included.

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Gbodpfx Asv E Ivfem Ejw Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/s total power requirement 3,0 kW weight of the machine ca. 70 kg dimensions of the machine ca. 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Gedok Uqg Sepfx Am Eobw Low running costs

Condition: ready for operation (used), Year of construction: 2023, centerless grinder Gbsdpfxszbb Ane Am Esw grinding wheel: 500 x 150 x 305 mm inspection wheel: 300 x 150 x 127 mm capacity: diameter 5-80 mm weight: 3650 kg

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm Godoy Ty N Sepfx Am Ejbw weight of the machine ca. 7,9 t

Condition: good (used), Year of construction: 1998, workpiece weight between centers: 3,000 g, workpiece diameter between centers: 630 mm, workpiece length between centers: 4,000 mm, overall weight: 16,000 kg, max. diameter of workpiece - 630 mm Gbjde Ai Uafjpfx Am Eow max. length of workpiece - 4000 mm accesories

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results Gedpfx Amox H Alis Eobw - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness - Adjustable working height Gbjdpjyv N Agsfx Am Eew - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: used, Year of construction: 1995, table-size Breite: 800 mm table-size Tiefe: 350 mm Gbodpfx Ajwp Tuyom Esw Dimensions (L/W/H) 4600 x 3200 x 2500 mm weight of the machine ca. 4,5 t