Used Belt Tensioner for sale (10,382)

Year of construction: 2021, condition: new, functionality: fully functional, 320x = 1 pallet € 1,900 Fedpfx Amstzwyno Eogi Brand: NN Year of manufacture: 2021, new/unused Dimensions LxWxH (mm): 10,000 length (4,000 kg) Quantity in stock: 320

Year of construction: 2023, condition: used, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Fgodpjzy Ulxofx Am Eoi The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a belt tensioning system from the manufacturer Humboldt, model: HU600.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Fgjdpfozw Apgox Am Esi Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, grinding width: 1,250 mm, grinding height: 160 mm, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, Working width 1250 mm. Longitudinal sanding belt length mm. 2620 Standard working thickness mm. 3÷160 3 units from the bottom 3 units from the topp First machine: 1st Bottom Working unit: C250 - Working unit with cylinder ø mm. 250 Motor with one speed of rotation, with power kW 37 Cutting speed of sanding belt m./sec. 30 Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90 Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 30 Fgodpfe Aiua Dox Am Eji Cutting speed of sanding belt m./sec. 25 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 3rd Bottom Working unit: T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure Motor with one speed of rotation, with power kW 18 Cutting speed of sanding belt m./sec. 16 Second machine: 1st Top Working unit: C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit; Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt. Cylinder with steel surface and helicoidal grooves for cooling C-steel Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 37 Cutting speed of sanding belt m./sec. 30 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 2nd Top Working unit: C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit; Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt. Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90 Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency. Motor with one speed of rotation, with power kW 30 Cutting speed of sanding belt m./sec. 25 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood 3rd Top Working unit: T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily interchangeable; depth of deployment mechanically adjustable Motor with one speed of rotation, with power kW 18 Cutting speed of sanding belt m./sec. 16 B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180 SR - Rotary blowers for blowing the dust. For technical specification please read included data sheet below. This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: max. 80 mm Workpiece thickness: min. 3 mm Drive power: 2.5 kW Feed rate: 4.5–22 m/min Feed rate control: stepless Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between guide rollers: 40 mm Workpiece vacuum clamping system Fan power: 5.5 kW Operating side: left Operator terminal: graphical Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm Weight: approx. 4,200 kg EQUIPMENT Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding Transport table with individual conveyor belts Refurbished conveyor belt Steplessly adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Stepless electronic sanding belt speed control via frequency inverter Wear-free braking system Fgsdpfj Ah Rt Hox Am Eji Pneumatic sanding belt tensioning Intermittent belt dust extraction system Infrared belt control Graphical operator terminal for entering machine setting values Numerical thickness adjustment Fault source display Workpiece throughput display Feed rate display Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape Workpiece vacuum clamping system with fan

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fedpo Ah Rxcsfx Am Ejgi Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Fgodpfx Amj Adfdds Esi Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, total height: 2,000 mm, total length: 8,000 mm, total width: 2,000 mm, overall weight: 5,500 kg, Löser belt grinding machine for external cylindrical grinding of pipes 1.3. Technical data Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Drive power: 7.5 kW Cutting speed: 28 m/sec Fuse: 32 A Pneumatic connection Fgsdpfx Aj Aihf Aem Esi Main supply: 6 bar | approx. 5 m3/h Supply to air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 150 mm Belt tension: pneumatically adjustable | manually adjustable Station positioning: manual Workpiece transport Workpiece support: V-groove | angle 120° Height adjustment of V-groove: manual Machines were retrofitted in 2022.

Condition: excellent (used), functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, without a pointed grinding head, for tubes and rods, used, with manual or pneumatic belt tensioning (depending on availability), refurbished (new motor and shaft bearings, new V-belts, etc.), in very good condition. Fjdpfoqk Uyaox Am Esgi

Condition: used, Year of construction: 1989, Belt grinding machine Manufacturer: MAFAC / Schwarz Maschinenfabrik Type: NT 200 H Year of manufacture: 1989 Fgodpfx Aez Df E Uem Eji Pneumatic belt tensioning 31126ä

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) Fjdok Dpp Sjpfx Am Eegi C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Fsdpfxek Aa Uks Am Eegi

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Fedok Aa Unopfx Am Esgi For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): Depending on the following band, please contact us Drive:no motor, both sides Transmission possible, two belts one Motor Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Fodpfx Ask Abufem Ejgi Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 Fjdpfx Amsk Abfbj Eogi The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft Fgedpfsgr Er Sjx Am Eji hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Fgodpjk Abf Uofx Am Eji Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Fgsdpfok Aba Tox Am Eei Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \'skeleton\' Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Fgodpfsk Aa Arsx Am Esi Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1997, Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm Fgsdpfxok Abtle Am Eoi height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg If you need other dimensions or individual, professional advice, please contact us. Simply contact us by phone or mail or use our filters on our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel Fgedpfxjgf Sw Nj Am Eoi - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Fedecr S Ecspfx Am Eogi Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: new, Year of construction: 2026, Rapid belt tensioning via lever Upper belt support with graphite coating 250 mm diameter weighted belt pulleys ensure optimal drive. With electric height adjustment With dust extraction and noise reduction features With noise reduction certificate With two speeds Adapts to surfaces through a pivoting sanding shoe For processing beveled surfaces Standard with right and left rotation The rapid belt tensioning enables quick and easy changing of the sanding belts. Delivered partially assembled Dimensions and weights Length approx. 4540 mm Width/Depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Dust extraction nozzle diameter 2 x 140 mm Fgodsff Hdbepfx Am Esi Work table(s) Work table height adjustment 620 mm Working width max. on table 900 mm Electrical data Power of height adjustment motor 0.37 kW Power of dust extraction motor 0.75 kW Power of drive motor 3.3 / 4.5 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s Sanding shoe length 360 mm Sanding shoe width 150 mm Workpiece Height max. 590 mm Height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table: Processing of the workpiece with an overhang to the right over the work table is possible.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt Fgodpfx Aeygcupjm Esi High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm stainless steel cover steel frame drive: geared motor 380/220v 50hz 1.1kw weight: ca 550kg

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Fsdpfok Abcgox Am Eegi Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics