Used Beveling Machine for sale (65,084)

Condition: good (used), Year of construction: 2003, machine/vehicle number: 347001, Used universal tool and cutter grinding machine Kunzmann WF 4/3 Heidenhain linear control TNC 124 Travels X/Y/Z = 400/350/400 mm Spindle speed 1-4000 rpm Spindle SK40 DIN 69871 Fixed angle table 650x350 mm, 5 x 14 H7 T-slots Coolant system, foldable acrylic splash guard for attaching to the angle table. Electric handwheel HEIDENHAIN HR 410 Ijdpsz Spfxofx Ap Dsih Further technical data is available upon request. The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available and can be inspected at any time. Please register in advance.

Condition: used, Year of construction: 1998, x-travel 0500 mm Iisdpezhxi Dsfx Ap Doh y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Isdpfx Aoxtaxwep Doih Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, Müga H 250-5 horizontal CNC machining center" Horizontal CNC machining center Müga Type/Model: H 250-5 Condition: Used New spindle with currently 0 spindle hours Year of construction: 2018 Isdez Syxtjpfx Ap Djih Technical data Travel distances X / Y / Z: 380 mm / 250 mm / 350 mm B-axis: Swiveling round table: Ø 250mm Rated voltage: 400 V, 3 phases 50 Hz Circuit 1: 250 V 50 Hz Circuit 2: 24 VDC Installed power: 30 kW Pre-fuse: 50 A Pneumatic connection: 6 bar Weight approx.: 60,000 kg Machine dimensions (L x W x H) approx.: 1.7 m x 4.1 m x 2.5 m Equipment - Siemens Sinumerik S 828 D control system - FMB bar loader - Additional coolant filtration for the internal cooling system - Chip conveyor Inquiry item: Transport costs in a customized offer.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. Iisdpezvmy Hsfx Ap Doh 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, all stainless steel Iodpfez Sy Hqjx Ap Djih belt width 400 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.400 x 800 x 1.300 mm

Condition: used, WEINIG UNITEC 10 tenoning and slotting machine from a UC-Matic window production line, not in working order. Iiedpfxsztv Axs Ap Dsh

Condition: used, For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device Ijdjztv Dpepfx Ap Djih - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: used, For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: Iodpfoztv Afex Ap Dsih - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, clamping length: 3,200 mm, pipe diameter (max.): 30 mm, HEBÖ RBV 12 Pipe Drilling Machine Isdoz Spx Aepfx Ap Djih - Through-hole diameter of the chuck: 30 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Iiodpfoz Sw Niox Ap Doh Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information Iijdjzkkrvspfx Ap Deh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2021, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm voltage 400 V total power requirement 1.1 + 2.2 kW weight of the machine ca. 2370 kg Iodpfx Aez St Rvjp Doih range L-W-H 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 / CK 45 steel) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop-end (swing-out bearing) - Operating manual (PDF)

Condition: used, Zwick Iiedpfxezil Uio Ap Djh Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Iijdjzii A Dspfx Ap Djh Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Iiodezfy Ivopfx Ap Doh Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 2002, X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Iiodpfxoz Sthno Ap Dsh Tool holder: SK 40 Control system: Heidenhain TNC 530i Spindle speed: 8,000 rpm Table surface: 1000 x 560 mm Equipment: Includes chip conveyor.

Condition: used, Year of construction: 2003, Liebherr LC120 Gear Hobbing Machine 3mm maximum hobbable module 1,500 rpm maximum hob speed90mm maximum hob diameter 200mm maximum hob lenght Iiodpfsz Stlajx Ap Djh 45 hob head swivel angle 4 mimimum number of teeth 120mm maximum workpiece diameter 250mm maximum axial travel 145mm table diameter 250rpm maximum table speed 17kN load capacity 30mm tailstock travel 17,000mm/min rapid traverse 13kN tailstock holding force 775879h working hours

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Iedpfx Ajz St Smop Dsih Total length 3700 mm Feed speed 8 m/min. Weight 850 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input Isdpoz Rpcrofx Ap Djih - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 Iijdpfjz Rmrdex Ap Doh The machine is supplied with a Kuka robot and can be inspected during production.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled Iiedpfx Apez Rm Swj Doh -Machine completely disassembled and wear parts replaced -Repainted

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Ijdpfx Apsz Rmk Ts Dsih Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, total length: 2,000 mm, total width: 1,600 mm, total height: 2,350 mm, Colour: White Empty weight: 3.000 kg - Drive system: Conventional - Model: vertical - Number of axes [pcs]: 3 - Power [kW]: 5.5 - Max. stroke [mm]: 250 - Max. reach [mm]: 365 - Table diameter [mm]: 500 - Table length [mm]: 500 - Table width [mm]: 500 - Table depth [mm]: 500 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 250 - Min. stroke speed [rpm]: 22 - Max. stroke speed [rpm]: 112 - Transport dimensions: 2000mm x 1600mm x 2350mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iiodpjz R Dr Usfx Ap Djh Lukas van Rossum

Condition: good (used), Year of construction: 2008, functionality: fully functional, 6 x used block stacking machines Manufacturer: Kolbus Model: STA 840 Year of manufacture: 2008 Condition: used, but functional Iedsz Rxdljpfx Ap Dsih