Used Biesse Rover 23 for sale (327)

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Empty weight: 2.500 kg Biesse Rover A1536 G FR Fsdpfx Afswnip Dsnjpc Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Technical features in the last photo Fsdpfjwmdynsx Afnopc Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267

Condition: like new (used), Year of construction: 2017, operating hours: 2,080 h, functionality: fully functional, machine/vehicle number: 10000144427, travel distance X-axis: 5,580 mm, travel distance Y-axis: 2,917 mm, travel distance Z-axis: 378 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 13 kVA, controller manufacturer: BIESSE, controller model: BH660, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, table width: 22,005 mm, table length: 4,300 mm, rotational speed (max.): 24,000 rpm, overall weight: 3,840 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 13,200 W, number of spindles: 10, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Biesse Rover A 2243 FT CNC Machining Center with Automatic Loading/Unloading System. Fsdpfxexy S Dfj Afnepc This 2017 machine features a large flat grid table of 4,300 mm x 2,205 mm, divided into a 12-segment Multizone vacuum system for independent work-holding. The machine is equipped with a powerful 13.2 kW HSK-63F electrospindle with a maximum speed of 24,000 rpm. Tool changes are handled by an 8-position turret magazine. A BH10L drilling unit with ten independent vertical spindles is also included. A key feature is the fully automatic material handling system, including a scissor table for pallet loading (max weight 6 tons), an alignment and labeling machine, and a servo-controlled sweeping arm for automated unloading onto the 4,800 mm discharge conveyor belt. The machine is controlled by a BH660 CNC numerical control and includes the bSolid programming software with the bNest module for nesting operations.

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Fodpfx Afsvazkfsnspc

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Fedpfxex Iulws Afnopc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, Vertical electrospindles: 2 Main motor power: 12 kW 4th axis: C axis Tool system: HSK-F63 Tool changer: 22 positions Vertical drilling heads: 29 Horizontal drilling spindles X: 8 Horizontal drilling spindles Y: 4 Grooving saw in X direction Number of clamps/bars: 8 Fpodpfex Ir Euox Afnoc 1 vacuum pump with a capacity of 250 m³/h Safety mat Control: BIESSE XP 600 Software: DIREKT CNC NC-HOPS 5.6 Includes 4 aggregates (door milling, etc.): Drilling, milling and cutting aggregate with 4 spindles Cutting and milling aggregate Lock case aggregate on both sides Lock case aggregate

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Biesse Rover K FT 2243 Machining Center The machine is equipped with one working area with two left-side origins, front and rear. Pneumatic stops WORKING UNIT: C-Axis electrospindle with 9.0 kW power BH10 boring head 1 circular saw blade, 120 mm diameter Automatic Loading and Unloading System (Sweeping Arm + Loading Suction Cups) Type A loading station – 3 reference columns Fpodpfx Ajx I Iu Ssfnoc Scissor lift Control system: BH660 fully PC-based Standard remote control panel Automatic lubrication system Vacuum system with zone clamping Electrical system bSolid software 250 m³/h vacuum pump Working table dimensions FT: X 4298 mm; Y 2203 mm Available end of July 2026

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Fpsdpjxraimofx Afnsc Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Used Biesse Rover 35L CNC machining centre for woodworking, year 2001, in very good condition as shown in the photos. Machining range X 4500 mm, Y 1650 mm, Z 180 mm. Equipped with 10 HP air-cooled electrospindle, 21-position chain tool magazine, drilling head, pod & rail vacuum table and Becker VTLF 2.250 vacuum pump (2011). Machine details Brand / model: Biesse Rover 35L Year of construction: 2001 Type: CNC machining centre for routing, drilling and milling of panels and solid wood Condition: very good, complete, as in the photos Working range: X = 4,500 mm Y = 1,650 mm Z = 180 mm Composition / equipment 10 HP electrospindle, air cooling, ISO30 Chain tool magazine with 21 positions Pod & rail vacuum table with several vacuum pods ATS predisposition for vertical or horizontal pneumatic clamping (doors, frames, edges etc.) Fsdpfsx A Ap Rjx Afnjpc Drilling head (multi-spindle boring unit) Dust extraction hoods on the machining head Vacuum system Vacuum pump: Becker VTLF 2.250 Year: 2011 Capacity: approx. 250 m³/h Power: 5.5 / 6.4 kW Max. vacuum: 200 mbar Technical data Approx. dimensions on site (L × W × H): 7,580 × 4,570 × 2,800 mm Approx. weight: 3,000 kg Other information Used machine in very good condition, ready for dismantling and loading More photos and video available on request Location: Lithuania, at our factory (ex-works) Availability: by agreement Price: on request

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 09220, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 663 mm, workpiece height (max.): 275 mm, MACHINE DETAILS Configuration: 3 (see brochure as PDF) Tool configuration: P1/A1 Travel X / Y / Z: 6200 / 1935 / 275 mm Speed: 100 / 300 / 300 m/min Compressed air supply Compressed air consumption: 400 Nl/min Operating pressure: 7 – 7.5 bar Compressed air connection: Ø 3/8" Extraction Extraction air consumption: 5,300 – 7,632 m³/h Air velocity at main connection: 30 m/s Fpsdpfx Afjwa Sduenec Static pressure at main connection: 2,800 – 3,000 Pa Extraction connection: Ø 250 mm MACHINE DETAILS Installation dimensions: approx. 9.6 x 4.7 x 2.0 m Transport weight: 7200 kg Installed power: 22 – 52 kVA Transport packages: 4 Documentation available: Yes CE marking available: Yes

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg Fodetqi Uyepfx Afnopc

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Pneumatic locking HSK63 12 KW 3-axis electro-chuck Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Machine to be restarted Nombre de ventouses12 Nombre de poutres6 Fsdpfx Afjtqka Tenepc Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics useful fields: 6000 x 1772.5 mm 1 4-axis spindle with HSK 63 tool charger, 12 positions Fpodpfxstqkbie Afnsc 28 drilling spindles including 8 horizontal 10 mobile beams with 3 suction cups + vices Machine to be restarted Course d'axe Y1850 mm Course d'axe X6860 mm Course d'axe Z275 mm Nombre de ventouses3 Nombre de poutres10 Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Fpjdotqi U Ijpfx Afnsc Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Fsdpfxouaz H Ie Afnspc Height: 2910 mm

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm Fsdpfet Rrdaox Afnjpc 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Power and Motors Fpjdpfx Afstqkbbonsc Overall dimensions

Year of construction: 2008, condition: reconditioned (used), machine/vehicle number: 22589, MC with traverse table Model: Rover A3 30 Year: 2008 4 axes Working area: x=3060 mm y=1260 mm z=150 mm 6 working balks L=1200 available in August 2023 Tooling not included Fpedpfxjlu Hhce Afnsc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used BIESSE Rover A - Nesting CNC - Year of manufacture: 2016 - Available from November 2025 Fedpexhcndofx Afnepc - Additional photos and video available

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Fedpfx Asv Aacfsfnopc

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Fsdot Ul Dnopfx Afnopc Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm Fpedskvrxujpfx Afnjc * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Fsdowt Snyepfx Afnspc

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Fpedpfew D Dhajx Afnoc

Condition: used, Numerical Control NC 1000 Software Biesse Works Working field in X axis 3685 mm Working field in Y axis 1290 mm Working stroke in Z axis 200 mm - piece passage 70 mm FT nesting full plane worktable Automatic loading system with side lifting table N ° 1 vertical electrospindle, with automatic tool change, Automatic tool change system with 18 positions - positioned on the rear of the machine Boring head with independent spindles arranged as follows: - N ° 7 vertical in X axis - N ° 7 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE Fodpfxowufv Tj Afnspc