Used Blacksmith Forge for sale (179)

Condition: used, Technical details: temperature max.: 800-900 ° muffle size (length): 700 Gujdpfx Afjw Rkule Tsa muffle size (width): 300 muffle size (depth): 300 mm total power requirement: 90 kW weight of the machine ca.: 0,13 t Small chamber forging furnace. In 2017, the refractory bricks inside were renewed for €5,000. *

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW Godpfx Afjw Rkybo Teua open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: used, This listing is for a Fristam FPE742/185A Centrifugal Pump. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. Product Overview: The Fristam FPE742 5.5KW Centrifugal Pump is a robust and versatile sanitary pump engineered for hygienic applications in industries such as food and beverage, pharmaceuticals, and biotechnology. With advanced design features and high-quality materials, this pump provides efficient, reliable, and gentle product handling, even at high volumetric flows. Its superior construction and innovative engineering make it a durable and reliable choice for critical processes. Key Features Hygienic Design: Close internal clearances as tight as 0.5 mm enhance efficiency while ensuring sanitary operation. Designed for gentle handling of sensitive products, preserving their quality and integrity. Advanced Engineering: Optimized Impeller Design: Maximizes efficiency while ensuring low NPSH requirements, reducing cavitation risks for smooth and quiet operation. Handles high volumetric flows while maintaining gentle product handling. Robust Construction: Made from 316L stainless steel castings and forgings, providing exceptional mass, strength, and durability. Resistant to hydraulic shock and cavitation, which can damage other pumps in demanding applications. Gsdpexxy D Refx Af Toua Ease of Maintenance and Installation: Features a self-aligning shaft for quick and easy installation and gapping. A concentric collar on the shaft prevents run-out, protecting the seal from wear and damage, extending the pump’s lifespan. Applications: Food & Beverage: Dairy, juices, and hygienic liquid handling processes. Pharmaceuticals: Transferring high-purity and sensitive products. Biotechnology: Supporting shear-sensitive biological processes.

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Godjwq Rutjpfx Af Teua Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Width: 430mm Height: 95mm Weight: 350kg

Condition: good (used), total length: 3,500 mm, total width: 1,500 mm, total height: 3,200 mm, overall weight: 10,000 kg, - Bear weight: 300 kg Guedpfxewin Sto Af Tja - Beat frequency: approx. 120 beats per minute

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Gjdpfx Ajw Dgi Tef Toua Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Godjyacyxjpfx Af Tsua

Condition: used, empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2025, operation weight: 20,000 kg, Heavy-duty transport trailer with dimensions 6000 x 2000 x 610 mm. Payload capacity of 20 tonnes at 6 km/h. Steering: all-wheel axle stub steered with adjustable tie rods. Tyres: 450 x 300 bandages on steel rims with double-sided tapered bearings, drawbar with forged 40 mm towing eye. Drawbar equipped with drop safety device, 40 mm spruce transport floor, recessed and bolted. Lashing eyes for load securing welded to each longitudinal side of the frame. Double-acting wheel chock mounted on the frame. Gusdpfon D D S Sjx Af Tea

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Gedpfx Asuzhmtsf Tsua Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Guodpfx Afowiwpue Toa

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm Gsdpew Nxnwofx Af Teua daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Gujdpfswvrazex Af Tea Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. Guodpfody Ewljx Af Tsa • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns.

Condition: new, Product description: Gedpfsgha A Sox Af Toua Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Gusdpfxow Tulgj Af Tja Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling Gedpfxexw D Ude Af Tjua - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Gusdpfx Afjw Smdfe Tja Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg Gedjxbzptspfx Af Tjua

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Gujdpfx Afsw Slctj Tsa Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Gujdpfew Sl T Sjx Af Tsa Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum, or stainless materials - Highly suitable for bending round materials and materials of various diameters - Bottom and side rolls are hydraulically driven up and down with direct linear movement - Protected against overloading - The top roll is driven by an electric motor and planetary gearbox. The bottom roll is driven by a cardan coupling system. Two rolls are driven - Position of the rolls can be easily read with three digital indicators - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation with a movable control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Complies with EU safety standards and has CE marking - User manual OPTIONAL EQUIPMENT - Remote support with NC control - Top crane (lift) for supporting large diameter bending - Hydraulic side supports for supporting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Stepless speed adjustment - Hydro-motor driven rotation - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4000 mm Gsdpfow Slxzjx Af Toua Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel Gsdpfx Afow Sl I No Tjua * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Godpfxow Smb Rj Af Teua TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Gedpfjw Smfcsx Af Teua Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system Godpoxw Eblofx Af Tjua * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg