Used Blacksmith Forge for sale (202)

Condition: good (used), machine/vehicle number: 23027, Offer 23027 Technical data: - Diameter top / bottom 350 / 750 mm - Wall thickness approx. 45 mm - Foot diameter 750 mm Kdedpfx Aji Dr Tbohyog - height 1380 mm - Total weight approx. 600 kg

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann Kdsdpfx Ahoid Im Esyjg max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Hole diameter 45mm Kjdpfx Ahofpgp Eoysdg Weight approx. 2.0 tons

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M04L/8718, Offer Number: M04L/8718 Machinetype: pointing and pincing machine Info: vibratory feeder Make: NATIONAL HARTFORD Type: FORGE-MATIC 2 F.M. Constr. year: 1980 diameter range: 12 mm Kdedpswi St Uefx Ahyjg shaft length under head: 120 mm output - pieces/min: 300 Location: In our warehouse

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Ksdpfx Ahowm Nm Toyedg

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Kodpfxewm Nm Ho Ahyjdg

Condition: used, overall weight: 495,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Kjdsv D Ddvspfx Ahyodg Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Kedpfeq U R Rujx Ahysdg Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Kdodpfx Ahsq U Sa Ssyog Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Kodpfx Aoq U R T Nohyodg Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Ksdpfjtgpdzex Ahyedg Total weight: 35 ton Anvil weight: 24 ton

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Kdsdpfelnk Tysx Ahysg Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Kdjdpswbginsfx Ahyog Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Condition: good (used), Year of construction: 1978, functionality: fully functional, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Kdodelnlq Dopfx Ahyjg Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t + Trimming press Voronez type K9538 Capacity, ton: 630 Stroke 400 mm Table size (left to right) 1250 mm Table size (front to back) 1250 mm Ram adjustment 180 mm Strokes 20/15 min-1 Shut height 750 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 58 kW Required space 3280 x 3470 mm Height of machine above floor 6190 mm Total weight 53 ton

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; Kodpfow Sdwvex Ahyedg - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 The same type as MPM 10000 Kdedpjlnllbjfx Ahyjg Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification Ksdpfxsx Ttifj Ahyodg CE mark EU Machinery Directive compliance

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Ksdpfx Asvvlduohyodg Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Ksdpfx Aswhduuohysdg

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Kdodpfxex I Rfgj Ahyeg Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Kdjdex I Rfaopfx Ahyog Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Kdedpfx Aexu Ewzehyjg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. Kdjdpfx Ahswzmgtjyeg -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) 💰 New value over €200,000 For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Ksdpfx Ahjxu E Sreyodg Certificates: CE, FCC, UL, UKCA

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Kedpfxoxnp Hao Ahyodg Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling