Forging Hammer

REITER KO

Condition: used, Year of construction: 2021, FL -3rd hydr. working circuit FL -Damping system DW / Bjdpfx Abot H H Uxe Uowk

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] Bwjdpfxouhbpls Ab Usk - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm Bwodsvzxpbjpfx Ab Uok steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 Bjdpfx Aevz Ec Iob Uowk - documentation

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain Bedouxfz Aepfx Ab Uewk total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height 76kw diesel engine pneumatic tires air-conditioned cabin 1220mm fork length Bwsdeuzivvjpfx Ab Uok additional bucket included additional 2000mm forks the fork is NEW CE certyficate PayPal payment available

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg Bwodpfxewrm Dtj Ab Uok >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm pneumatic connection Bwodpfx Absigadlj Ujk cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: new, Year of construction: 2025, - Capacity 4 mm - Hydraulic roller adjustment - Foot control - Brake motor - Hydraulic pressure adjustment - With 3 sets of rollers - Emergency stop - 400V Bwodpfeq Tdm Aox Ab Uek

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9 h, This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, it's ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine. Additional equipment • Tailstock spindle diameter: 100mm / Tailstock spindle travel: 200mm / Internal taper of the tailstock spindle: Mk.5 Machine Benefits Technical Machine Benefits • Distance between centers: 1000mm /center height: 320mm / swing diameter over bed: 640mm / swing diameter over carriage: 405mm • Carriage travel: 380mm / bed saddle guide length: 570mm • Spindle head according to din 55025, size 8 / spindle bore: 83mm / internal taper of the main spindle: metric 90 • Drive power 60% / 100% duty cycle: 20. 5/17 kw / max. Torque at the spindle: 1400nm / speed range gear stage 1: 0-800 rpm / speed range gear stage 2: 0-2500 rpm • Overhaul measures include hardening and grinding of bed guideways, grinding of tailstock guideways, and overhauling of bed and cross-slide unit. • Replaced and renewed components include sliding surfaces, wedge rails, all wipers, belts, main spindle motor, safety devices, rotary switches, and lubrication system. • Cycle control weiler: 840d/sl1 • Tool holder according to customer requirements: multifix size c or parat size 3 Extra Information Machine overhauled in 2022Cycle controlledOptional: A used 200 mm jaw chuck can be supplied. A Lynette is not included with a 1 m centre distance, but can be purchased from the manufacturer at any time. As stated in your description, we offer customers a choice of two different tool systems: Multifix size C or Parat size 3. These are completely rebuilt, which is why there are no tool holders. Bedpfxox D Ry Ho Ab Uswk