Used Bottle Filler for sale (1,849)

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  - Capacity: - 2,000 cans/hour at 0.33 L - 1,500 cans/hour at 0.5 L - Compatible formats: Standard and Sleek cans (not suitable for Slim cans) - Filling system: Isobaric (for carbonated products) Njdpfx Aboxnmv Ee Noda - Product types: Beer, cider, soft drinks, or similar beverages - Condition: Used – as new (only 1,500 cans filled)

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Ndjdpfexhf Hiox Ab Nsa Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Nedpfx Aoxgfr Nob Neda - Dry tunnel | Shandong Yuesheng | 2019  - Labeler incl. laser printer   - Collecting table  

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Ndedexfccispfx Ab Nja - Capacity: 8,000 bph - Formats: 0.75 L bottles - Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection - Dimensions: 318 × 152 × 235 cm - Weight: 1,022 kg Scope of Delivery  - Main bottle bottom inspection module - Mouth integrity control - Wall inspection - Washing liquid residue detection - Push expulsion - Progressive expulsion - CIP Astigarraga  

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data - Capacity: Approx. 250 bph - Formats: Adjustable for different bottle sizes - Filling system: Isobaric with CO₂ pre-injection into filling bell - Valves: 2 - Max. working pressure: 5 bar - Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Ndedpjxd Ez Esfx Ab Nja - Electrical supply: Single-phase, 220 V  

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  Nedpfxoxc H Tgj Ab Nsda - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts  

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  - Output: up tp 50,000 bph - Last used for:  Nodexch Acspfx Ab Noda - 0,25 l Vichy bottle - 0,5l Set 1 - 0,5l Set 2 - 0,5l Set 3 - 0,7l GDB - 0,75l GDB - Inspection modules - Bottom inspection camera - Sealing surface inspection camera - Thread inspection camera with cone optics - Side wall inspection camera - Contour detection and color detection with camera Accessories/scope of delivery    - Ejector - some spare parts available - some conveyors

Condition: used, Year of construction: 2019, Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  - Filling points: 2 Nedpfoxb Unisx Ab Njda - Filling valve diameter:  mm - Suitable for filling highly viscous media - Fields of application: food, beverage, pharmaceutical and chemical industry

Condition: used, Year of construction: 2024, Overview:  The ALWID KRONE-D is a semi automatic dosing filler. The machine is suitable for volumetric filling of not carbonated liquids (low viscosity up to high viscosity) for the pharmaceutical, chemical and food industry. Procedure: The ALWID KRONE-D is a semi automatic machine. The operator places the bottles on the height-adjustable worktable manually and presses the START switch at each filling valve. That way, also single bottles can be filled. As soon as the START switch has been activated, the filling valve moves down and opens. The bottle is filled. Nsdexb Umropfx Ab Neda Then the filling valve closes and automatically moves up, when the adjusted volume has been reached. Now the filled bottle can be machine can be used for several different liquids, bottle shapes and bottle sizes without requiring additional format parts. As the construction is solid and clear, the format change only needs a short time. The filling volume is easily and quickly adjustable by changeable volume-adjustment rods. Immersed filling is possible, when foaming products are to be filled. The machine is movable. Technical data: number of filling stations: 2, expandable to 4 diameter of filling valve:  filling volume: 100-1000 ml  machine made of: stainless steel product touching parts stainless steel, glass and plastic pneumatic connection:: R 1/2“ / 6 bar electric connection: not needed  

Condition: used, Year of construction: 2018, Overview This isobaric filler was manufactured in 2018 by the Italian company Rizzolio Equipment S.r.l.. The unit was originally purchased for starting a new carbonated water production project, but the project was never realized. The machine has never been used, is still wrapped, and remains in as-new condition. It is immediately available. Technical data - Capacity: 150–450 bph - Formats: 0.5 L and 1.0 L glass bottles with pilfer cap (adaptable with proper adjustments and heads) - Filling system: Isobaric - Filling heads: 2 Nsdpsxa Apfofx Ab Nsda - Power supply: 230 V, 50 Hz, single-phase, 2.0 kW - Construction: Stainless steel - Control options: Manual/automatic CO₂ purge & wash selector, vacuum pump control

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data Ndedpfxsxalibs Ab Noa - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: used, Year of construction: 2023, Overview  This isobaric filling monoblock was manufactured in 2023 by the Italian company Alfatek BP Srl. The machine is a Beer Plus version with an additional 8-head deoxygenation turret before the filler, providing three pre-evacuations for improved filling performance. After the sale, it will be fully overhauled, delivered as good as new, and covered by a 12-month warranty. The machine is available immediately. Technical data  - Capacity: 6,000 bph (at 33 cl) - Formats: 33 cl, 50 cl, 75 cl (crown cork 26 mm and 29 mm) - Execution: - 24-head rinser - 8-head deoxygenation turret - 28-valve isobaric filler - 4-head crown capper (Arol) - Application: Beer and carbonated beverages (e.g. lemonade, soda) Ndjdpfx Abow U Si Sj Nja - Neck finish: Crown cork 26 mm, crown cork 29 mm - Condition: In excellent state, to be delivered fully overhauled and guaranteed Scope of Delivery  - Complete monoblock including rinser, deoxygenation turret, isobaric filler, and crown capper - Documentation available - 12-month warranty after overhaul

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  - Output: up to approx. 35 cans per minute (depending on product) - Formats: 330 ml & 440 ml standard cans (202) - Filling system: 6-head filler - Closure: double seam seamer for 202 ends - Voltage / power supply: not specified - Special features: - Retrofitted rinser and dryer (Vigo UK) - Pneumatics converted to metric connections - Original operating instructions available Ndsdewzb Iropfx Ab Nja Scope of delivery  - 1 × Can filling line | ABE | CraftCan35 | 2017 - Incl. rinser and dryer (retrofitted) - Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt - Some acrylic protective cladding (some replacement required)

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Njdpowwq Sfsfx Ab Noda - Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour - Working Direction: Left - Right - Number of filling stations: 16 - Number of closing elements: 4 - Siemens control - Below surface filling - Lowering and raising the filling pipe during the filling process Scope of delivery: - Filler - Capper - Cap sorting unit - Cap alimentation

Condition: used, Year of construction: 2020, Overview  This semi-automatic can filling machine was built in 2020 by the Italian manufacturer EMMA SRL and is in excellent condition as it has been regularly serviced by the manufacturer. The machine is immediately available and is being sold due to a capacity expansion by a larger model from the same manufacturer. Technical details - Output: approx. 350-400 cans per hour - Formats: 330 ml (Sleek); format parts for 440 ml included - Filling system: Isobaric with CO₂ pre-ventilation, CO₂ tunnel, CO₂ lid gassing - Seaming: Integrated single-head can seamer - Power supply: 0.8 kW, 220V, 50 Hz - Compressed air consumption: 180 L/min at 6 bar Nedpfx Aowrixyeb Nsda - Dimensions (L x W x H): 1100 x 1130 x 1160 mm - Weight: 280 kg

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: Njdswiy Tvopfx Ab Nsda - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Nedowiu Nljpfx Ab Nsda - Capacity: - 6,000 bph (1.0 l bottles) - 7,000 bph (0.75 l bottles) - Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) - Bottle height: 150–370 mm - Number of filling valves: 36 - Filling principle: Low-pressure vacuum filling - Running direction: Left to right - Filling valve type: Electropneumatic - Special features: - Programmable bottle parameters with automatic adjustment for bottle height and fill level - Hot filling capable with auto shutdown at temperature deviation - Automatic speed adjustment based on bottle infeed - CO₂ pre-flushing of bottles - Inert gas overlay possible in the filler bowl - Auto fill level control depending on product temperature - Auto wine changeover via CIP tray - CIP dummy bottles and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill level adjustment Scope of Delivery  - MBF Fillmatic 36LV Filler - CIP dummy bottles - CIP tray - Tele-Modem - Complete documentation (electrical and spare parts)

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data - Capacity: Up to 600 bags/hour (depending on product viscosity and format) - Volume range: 0.5L – 3L - Pressure: min. 6 bar - Bag type: Doypack with screw cap - Filling principle: Gear pump with high-precision flowmeter - Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Nodpfxjwiu Hko Ab Neda - Frame: Stainless steel - Cleaning/Sterilization: Integrated cleaning and sterilization functions - Control panel: Touch screen Scope of Delivery  - AIT DOYPACK semi-automatic filling and capping machine - Integrated gear pump and flowmeter - Touch screen control panel

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  - Capacity: - 27,000 b/h at 1.0l PET Njdjwiizpepfx Ab Nsda - 25,000 b/h at 1.5l PET - 22,500 b/h at 2.0l PET - Formats: 1.0l, 1.5l, 2.0l PET bottles - Closure: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw capper 720-18-126 (Alcoa) - Running direction: Right-Left (anti-clockwise) - Neckhandling with Pick&Place-System - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 - Machine safety: Full guarding – lifting version - Control Unit: Siemens S7 - Accessories: Krones Checkmat Scope of Delivery - Krones Sensometic VP-I-PET filler - Screw capper by Alcoa (720-18-126) - Krones Checkmat - Pick&Place neckhandling system - Integrated foaming system - Neumo butterfly valves

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  - Capacity: 44,000 bph (500 ml glass bottles) Nodpfx Abewif Dgs Njda - Formats: 500 ml glass bottles - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 - Crowner: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Air-conditioned, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Direction: Left to right Scope of Delivery - Filler: KHS Innofill DMG SVF 144-KK24 - Crown corker with 24 stations - Control cabinet and operator panel - Bottle clamping star wheels - CIP cups - High-pressure injection (HDE) - Bottle shower at discharge - Bottle table in roof optic - Central lubrication system - VPN remote access capability - Safety housing (updated in 2016, with flushing system) - Touch panel - Cork feeding unit by NSM - Filling level inspection system: Krones Checkmat (2015)

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 Njdpfx Abowh U Avo Nsda - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed Ndedjwg E D Ispfx Ab Nsa - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2005, Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  - Manufacturer: Officine Pesce S.n.c. - Model: PG 97/M4 - Year: 2005 - Voltage: 220V Nedpowbanqefx Ab Neda - Frequency: 50Hz - Filling system: Semi-automatic - Components: - Accumulation tank - Filling tap - Electromechanical valve - Bottle-holding plates - Capping unit - Control panel - Pedal-operated mechanism

Condition: used, Year of construction: 2018, Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Technical details  Nsdev Rq Dpopfx Ab Noda - Filling principle: Atmospheric - Output: 800-1,000 bottles/hour - Bottle format: 330ml - Capper: 26mm crown cap

Condition: used, Year of construction: 2016, Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Nodpfov Nhwkox Ab Noda Technical details  - Filling valves: 10 - Filling principle: Atmospheric - Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) - Closure: 26mm crown cap - Output: 1,500 bottles/hour