Used Brewery for sale (103)

Condition: used, Year of construction: 2016, Overview This Thermindus GV INSIEME is a propane-fired steam generator with an output of 250 kg of steam per hour, built in 2016 in Italy. It was commissioned in 2017 and supplied process steam to a craft brewery: the brewhouse hot side, a flash pasteurizer and a semi-automatic keg washer. It comes with 20 m of stainless steel steam line, a propane supply with automatic changeover and a maintenance logbook covering 2017 to 2026. Technical data - Manufacturer: Thermindus (Italy) - Model: GV INSIEME - Year of manufacture: 2016 - Machine type: gas-fired steam generator - Steam output: 250 kg/h - Maximum operating pressure: 6 bar - Safety valve setting: 6 bar - Test pressure: 10.4 bar - Maximum temperature: 165 °C Bedpfsz Hfxtsx Afgsdi - Water content: 44.1 l - Fuel: propane (P35 cylinders) - Electrical supply: 385 V + N - Pressure equipment: PED 2014/68/EU, category III, CE marked - Operating hours: 1,600 h Equipment - Steam generator with multi-jet gas burner - Control cabinet with indicator lamps and emergency stop - Stainless steel steam line, 20 m (flow and return) - 2 propane cylinder connection hoses with automatic changeover valve Condition Used, in very good working condition; in production until August 2026. Rust traces on the parts that are not stainless steel, with no effect on operation. Maintenance logbook with weekly, quarterly and annual checks; the last annual service in January 2026 covered descaling, a combustion check and anti-corrosion treatment. The unit is already dismantled, stored and ready for truck loading. Inspection possible on request. Availability Immediately. Location: France.

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro Bedpfszk I N Ssx Afgjdi - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), functionality: fully functional, Manifold with Alfa Laval Valves and Regulators Valve manufacturer: Alfa Laval Number of valves: 11 pieces Number of regulators: 6 pieces Set dimensions: 800 mm × 550 mm × 1200 mm The manifold (valve assembly) is equipped with 11 Alfa Laval valves and 6 flow regulators. The unit is made of stainless steel, designed for use in hygienic process installations such as the food, dairy, brewing, or pharmaceutical industries. Alfa Laval valves are renowned for their high reliability, precision operation, and ease of maintenance. The integrated regulators allow for precise control of pressure or media flow, ensuring efficient and safe operation of the entire system. Applications: - Production lines in the food and beverage industry - CIP / SIP systems (Cleaning and Sterilization in Place) - Process installations in dairy plants and breweries - Flow control systems for process liquids Bodsxviz Tepfx Afgjdi

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, BITZER 4M35.2 (F 400 H) | Compressor unit | Piston refrigeration compressor with a tank Bodpfx Ajy Ufh Aefgedi Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model/type: 4M35.2 Tank model/type: F 400 H, Capacity: 39 liters Unit serial number: 4810377 Year of manufacture: 1995 Power supply: 400 V / 50 Hz / 3 phases Rated electrical power: 26 kW Refrigerant: R417A Allowable operating pressure: 28 bar Overall dimensions of the unit: 2800 x 1300 x 1900 mm Vertical buffer/accumulator tank Dimensions: Ø 1100 x 2600 mm Industrial circulation pump Grundfos Complete power and control switchboard Dimensions: 850 x 1300 x 350 mm Technical condition and completeness: This professional, industrial refrigeration compressor (compressor-condenser unit) is a high-performance device designed for commercial and industrial refrigeration systems. Units of this type are widely used in meat processing plants, butcher shops, slaughterhouses, cold storage warehouses, breweries, and the dairy industry to supply refrigeration and freezer rooms, quick-cooling tunnels, or technological lines for cooling liquids. The heart of the system is the legendary, 4-cylinder semi-hermetic Bitzer compressor, characterized by its exceptional performance, high energy efficiency (even under partial load), and unparalleled mechanical durability. The compressor is integrated with a horizontal Bitzer F 400 H liquid tank with a capacity of 39 liters (pressure resistance up to 28 bar), which acts as a buffer for the liquid refrigerant, stabilizing the operation of the entire system under varying ambient temperatures and evaporator thermal loads. The offered set also includes additional extensive supporting infrastructure: a vertical medium buffer tank (dimensions: Ø 1100 x 2600 mm), a high-performance Grundfos circulation pump, and a control switchboard with complete electrical equipment and protection devices (pressure switches, contactors). Thanks to this, the unit can be used directly as a complete, self-contained refrigeration machine room.

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) Bdsdpoy Azq Nefx Afgji - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  - Output: up to approx. 35 cans per minute (depending on product) - Formats: 330 ml & 440 ml standard cans (202) - Filling system: 6-head filler - Closure: double seam seamer for 202 ends - Voltage / power supply: not specified - Special features: - Retrofitted rinser and dryer (Vigo UK) - Pneumatics converted to metric connections - Original operating instructions available Bdedpfx Ajwzb Irsfgei Scope of delivery  - 1 × Can filling line | ABE | CraftCan35 | 2017 - Incl. rinser and dryer (retrofitted) - Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt - Some acrylic protective cladding (some replacement required)

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data - Capacity: 250 L brewhouse Bdodpfxsy Sic Ss Afgji - Application: Beer production - Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  - Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system - Fermenter | 2012 | 500 L stainless steel fermenter with CIP system - Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters - Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter - Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper - Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L - Pump | 2012 | Transfer and cleaning pump with inverter

Condition: used, Year of construction: 2014, Overview  This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person.  Scope of delivery  Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014 Bdedpfx Afor Hkaqsgei

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Bdsdpfx Afett Um Aogei

Condition: used, Year of construction: 1992, Overview Bdsdpfx Afozlqu Hsgoi This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data - Capacity: 20 hL per batch - Hot water tank: 4,586 L, steam heating jacket - Cold water tank: 4,400 L, glycol cooling jacket - Heating: Steam - Control: Semi-automatic with PLC Bedpfx Afjxcng Ijgedi Scope of Delivery  - Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated - Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket - Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket - Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity - 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel - Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control  

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Bdsdpfxoy Ai Hlo Afgji

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Bdjdozrihxspfx Afgoi Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: used, Year of construction: 1999, machine/vehicle number: LC652, Used KRONES filling line for beer - glass - 24000 BPHTechnical Specifications & Performance DataThis used bottling line is a second hand complete glass beer bottling line engineered for industrial packaging and beverage production. It is configured around a Krones Mecafill VK2V filling monoblock and complemented by bottle washing, pasteurization, labeling, and crate handling equipment. The line is optimized for glass beer bottles and delivers reliable output with precise control of product quality parameters.Rated capacity: 24,000 bottles/hour at 0.5LCompatible formats: 0.33L and 0.5L beer bottlesContainers: GlassFilling monoblock: Krones Mecafill VK2V 066-103/KK (1999), 66 filling valves, double air evacuation, integrated rinser with 60 heads (pressurized water) and 11 capping headsLabeling: Krones Prontomatic 720-18-86-130 (1999), cold glue, front/back/neck applicationBottle washers: Krones KES-1-1-190/19-80 (1998, retrofitted in 2013) and Robak PBSzPasteurizer: Fischer (1999) HTST module; nominal 130 hl/h, 5°C inlet, 72°C for 30 s (30 PU), 11°C outlet; buffer tank 6,000 LElectrical & utilities (pasteurization system): 3x400V, 50Hz; compressed air 6 bar (dry, oil-free)Additional Fischer heat-exchanger modules: EUROPA 40PI and DUBACAL 400P plate pack references (PS 16 bar; plate pack Cmax 780 mm, Cmin 770 mm)Advanced Automation & Control SystemsThe line integrates robust automation for consistent, repeatable performance in beverage production. The pasteurization system is automatically controlled with supervisory monitoring of all key process variables, enabling precise quality assurance at high throughput.Monitored parameters: pasteurization temperature, holding temperature, inlet/outlet temperature, temperature and pressure during pasteurization, flow volume, pasteurizing units (PU), buffer tank level, and filling pressure after buffer tankOperating modes: manual operation with automatic control for stability and safetyElectrical specifications: 3x400V, 50Hz (pasteurization system)Quick changeover between 0.33L and 0.5L formatsProduction Line Integration CapabilitiesThis complete bottling line is engineered for inline operation and smooth integration between washers, filling, pasteurization, labeling, and crate handling. It suits breweries seeking an industrial packaging solution for glass beer bottles with stable, high-speed performance.Integrated bottle washers upstream for returnable glass handlingHTST pasteurization between filling and labeling for microbiological stabilityCold-glue labeling with multiple label positions (front, back, neck)Crate washer and crate load/unload equipment for returnable logisticsMachine TypeManufacturer / Model Bdsdpfxsziyyye Afgoi

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) Bedpezpaiujfx Afgsdi - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Bjdpfx Asz D Hmmefgedi Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: used, Year of construction: 2016, Overview Complete fermentation and cellar plant from a craft brewery in Spain: 18 cylindro-conical fermenters with 64,000 L net fermentation capacity, 3 vertical brite tanks, the ABE glycol temperature control boxes and a York air-cooled chiller - 77,900 L of cellar capacity in total. The core of the plant was built by ABE (American Beer Equipment) in 2016 and is completed by fermenters from INOX GC and Impiantinox. All tanks are stainless steel with cooling jackets and are installed and in operation until dismantling. The plant is offered as a complete package; sub-lots or individual tanks are possible on request. Technical data - Fermenters: 18 units, 64,000 L net in total - Brite tanks: 3 units, 23.47 hl, 46.94 hl and 70.41 hl - Total cellar capacity: 77,900 L Bdsdpfx Afjz H Ad Tjgji - Material: stainless steel, cylindro-conical fermenters on legs - Cooling: glycol jackets, individual digital temperature controller per tank - Chiller: York YLCA air-cooled chiller, cooling capacity 52.1 kW - Main build year: 2016 (ABE) Scope of Delivery - Isobaric fermenter | ABE | 3 x 2,000 L net (23.47 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 8 x 4,000 L net (46.94 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 2 x 7,000 L net (70.41 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Fermenter | ABE | 1 x 8,000 L net (93.88 hl gross) | cylindro-conical, cooling jacket, side manway | 2016 - Isobaric fermenter | INOX GC | 2 x 1,000 L | cylindro-conical, CE plate | 2019 - Fermenter | Impiantinox | 2 x 1,000 L (max. usable 1,150 L) | cylindro-conical, CE plate | 2008 - Vertical brite tank | ABE | 3 units: 23.47 hl, 46.94 hl, 70.41 hl | pressure gauge, side manway | 2015 - Glycol temperature control boxes | ABE | one digital controller per tank | with parts catalogues and manuals | 2016 - Air-cooled chiller | York | YLCA | 52.1 kW cooling capacity Condition Used, installed and in operation until dismantling. Manuals and parts catalogues for the ABE tanks and control boxes are available. Viewing possible by appointment. Availability Available immediately. Sold as a complete package; sub-lots or individual units on request.

Condition: used, Year of construction: 2016, Overview This ABE KEG COMMANDER DUAL HEAD is an automatic keg washer built in 2016 by American Beer Equipment (USA) for craft breweries. Two kegs are processed side by side in a PLC-controlled cleaning cycle, with an output of 24-30 kegs per hour. The compact stainless steel unit carries its tanks, pumps and piping in its own frame and is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: KEG COMMANDER DUAL HEAD - Year of manufacture: 2016 - Machine type: automatic keg washer with 2 washing stations - Output: 24-30 kegs/h - Operating mode: automatic, PLC with HMI display - Tank volume: 25-30 US gal (approx. 95-115 l) - Maximum power consumption: 11.3 kW - Electrical supply: 3-phase - Feed water: min. 4.1 bar (60 psi) at approx. 57 l/min (15 gpm) - Compressed air: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Air drain pressure: 1.4-2.1 bar (20-30 psi) - CO2 supply: 6.2 bar (90 psi) at approx. 480 Nl/min (17 SCFM) - Machine weight: 220 kg Equipment - Two washing stations with height-adjustable keg holders and wash heads - Control panel with HMI display, a cycle start button per station, cycle cancel and emergency stop - Integrated stainless steel tanks - Two Goulds pumps with 3-phase motors - Stainless steel piping with water and drain connections and manual ball valves - Operator's and technical manual (English) Bodjz Hc Ulepfx Afgodi Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm Bodpfoztzbyjx Afgedi

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  - Capacity: up to 10,000 bottles/hour - Bottle formats: 330 ml, 500 ml, 750 ml Bdjdpfexl Di Dsx Afgoi - Bottle height range: 50–360 mm - Bottle diameter range: 40–160 mm - Label length range: 30–140 mm - Rotation direction: Clockwise - Number of bottle plates: 10 - Number of labelling stations: 1 - Air consumption: 125 L/min - Power consumption: 17.3 kVA, 400 V - Working height: 1,100 ± 50 mm - Construction: Stainless steel frame, enclosed safety housing - Control system: Micro PLC with touch-screen for speed, production, and fault management - Key features: - Cold-glue labelling head with oil-bath lubricated mechanisms - Central carousel with centering bases for precise bottle positioning - Pneumatic heated pump for adhesive circulation and return system - Automatic bottle synchronization with infeed screw to prevent breakages - Micrometric glue adjustment to reduce film thickness and ensure clean labelling - Bottle retainers for smooth handling and reduced congestion - Gear-driven transmission with clutch and emergency stop system - Compact, fully enclosed design for hygiene and safety  

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Bjdey Rk Igspfx Afgedi - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2013, Overview Bdedpfoyq Ia Eex Afgji This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  - Formats: KeyKeg - Application: KEG filling - Operating pressure: 5.5 bar - Electrical supply: 230/400 VAC - Control voltage: 24 VDC - Frequency: 50 Hz  

Condition: used, Year of construction: 2017, Overview  Bdodpswm Rfksfx Afgei The Tecnoimpianti MINI STAB 300 SINGLE is a compact system for the acid stabilization of must and wine using the ion exchange process. It was built in 2017 by the Italian manufacturer Tecnoimpianti Water Treatment S.r.l. and was rarely used by the original owner and is now being sold due to a change of ownership. The machine is therefore in very good condition and available immediately. It is ideal for wineries, breweries or the production of carbonated beverages. Technical details - Capacity: approx. 300 l/h - Area of application: Acidification / stabilization of must and wine - Process: Ion exchange with strongly acidic cation exchange resin - Compressed air requirement: min. 6 bar - Power supply: 400 V / 3 Ph + N / 50-60 Hz - Installed power: 3.2 kW - Operation: Touchscreen HMI - Protection class: IP65 - Compressor tank: 400 L, 3 bar operating pressure - Certification: EU-compliant / CE - Special features - Fully automated process control - Precise pressure and temperature control - Stainless steel construction (hygienic & durable) - Plug-and-play system with touchscreen - Built-in nitrogen feed - Effectively reduces potassium bitartrate formation

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data - Manufacturer: Kisters Maschinenbau GmbH - Model: Wrap Around Packer 420/50 - Machine Type: Wrap-around packer / secondary packaging machine - Year of Manufacture: 2001 - Capacity: up to approx. 50,000 bottles/hour - Operating Hours: 16,976 h - Application: Packaging of PET one-way bottles - Previous Use: PET one-way beverage line - Current Status: Taken out of operation due to line reconfiguration - Bottle Formats: 0.33 l, 0.355 l, 0.5 l - Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats - Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 - inkl. shrink application for trays  - Listed Formats: - 0.33 l LNB 2x12 tray - 0.355 l LN 2x12 tray Bdodsy Sidvspfx Afgoi - 0.33 l LNB 4x6 tray - 0.355 l KN 4x6 tray - 0.33 l LNB 3x8 tray - 0.355 l LN 3x8 tray - 0.5 l LN 4x6 tray - 0.5 l LN 6x4 tray - 0.5 l LN 4x6 KLW full carton - 0.33 l LN 4x6 loose wrap-around - 0.33 l LNB 4x6 90° tray - 0.355 l LN 4x6 90° tray - 0.33 l BA 4x6 loose wrap-around - 0.33 l BA 3x4 loose wrap-around - 0.33 l Miller 4x6 loose wrap-around - 0.33 l Salitos 4x6 loose wrap-around - 0.33 l Vichy 4x6 tray cluster - 0.33 l LN 4x6 tray cluster - 0.33 l LN LCE 4x6 full carton - 0.33 l EW 4x6 export full carton - 0.33 l EW 4x6 export tray - 0.5 l EW 4x5 loose wrap-around

Condition: used, Year of construction: 2018, Overview  The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details  Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute Bdodpfouhthtox Afgji