Used Brian Exeter Spindle Moulder Tf 900 for sale (18,111)

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Motor Power 4kw 1.1/4" Spindle diameter Lodpfxjzumtqj Akqohn Spindle length 140mm Ex College Machine - Like New Year 2002

Condition: good (used), Year of construction: 1993, functionality: limited functionality, power: 11 kW (14.96 HP), spindle diameter: 30 mm, total length: 2,600 mm, Planed cast iron table Lhedjzp I Ekepfx Akqen Table length 2600 mm Motorized height and swivel adjustment Swivel range -5° to +45° Feed unit 4 speeds 3/4/6/9000 rpm Adjustment range of the milling cutter arbor 150 mm Aigner stop jaws The machine is in very good condition Motor brake defective Digital display defective

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm Lhjdpfx Akjhi Tv Hsqon 5.5 kW engine power 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Can be purchased without advance

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Lhodpfx Akjy Rzytjqjn Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: used, Technical specifications: Spindle diameter: 50 mm Lhjdpfx Aozilqwekqen Replaceable spindle Spindle speed: 3/4.5/6/9 thousand RPM Spindle adjustment: up/down Starting method: star/delta Rotation direction: left/right Power supply: 380 V

Condition: used, Swivel spindle milling machine Lsdpezuyw Nofx Akqjhn Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, used Lhsdpfx Asy Ay Awskqsn Cleaned, functionality tested, test run performed, partially refurbished 16 A cable installed Belt renewed Runout measured New wooden jaws attached Manufacturer: Bäuerle Type: SFM Motor: 4, 5.5 hp Motor: 2 speeds/pole-switchable 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden stop jaws: new Belt: new Milling stop with fine adjustment Space requirement: approx. 1000 x 900 x 1000 mm Weight: approx. 600 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: excellent (used), Table milling machine SCHNEIDER Lhjdpfx Akjgk Ui Eeqsn Type SK 2/4 II with Holz-Her feed system with sliding table

Condition: good (used), Year of construction: 1979, Table dimensions 1100 x 760 mm Motor output 4,7 kW Ledpfezhcg Tex Akqjhn Spindle diameter 30 mm reus 4 U/min Weight 850 kg Year 1979

Condition: used, Year of construction: 1991, cleaned, function checked, test runRunout: 3/100 mmwith glazing bead cutting sawwith feed deviceused, good conditionMake GuillietType QFPYear of construction 1991Machine no. ROM 8102 V 11889 kW motor reinforcedincl. feed with 4 rollersSpeed levels 3 / 4.5 / 6/8000Milling arbor diameter 50 mmClamping height 270 mmStorage location from locationDelivery in the current condition as seenTechnically tested, without acked.- free on truck - Ljdpfx Aovwf Sbjkqohn

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, worktable: 870 mm x 560 mm spindle diameter: 35 mm maximum tool diameter: 180 mm spindle overhang from the worktable: 155 mm Lodpfx Aksznllrjqehn 3-roller feed mechanism three-phase

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Ledpfsh Dzxzjx Akqehn Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Power supply: 380 V Producer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: new, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Revolutions: 1300/2500/3500/5000/6000/8500 rpm electric spindle height adjustment Spindle lock Working table dimensions: 700x1200 mm Adjustable culagi arms Engine power: 4 kW Power supply: 380 V Lhodpfxehp N Nbo Akqon Producer: Paoloni Overall dimensions: Length: 1,200 mm Width: 850 mm Height: 1340 mm

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Ledpjiknp Rsfx Akqjhn Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, Year of construction: 1984, Second-hand machine Lhedpfx Aszk N R Rskqon Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: good (used), Table length 115 cm Width 90 cm 3/4 kW motor Lhsdpfx Aowm Hbbokqen 45-degree angle Spindle 30 mm

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Lhjdpfoxqp Ngsx Akqsn

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Lhedpfx Akeyy Np Ieqen

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 160 mm Swiveling spindle: -10° - 45° Speeds: 3000/4500/6000/8000/10000 rpm Lsdpfx Aszd Ap Tokqohn Manual adjustment of spindle height and angle Spindle lock Work table dimensions: 760/2500 x 1000/1500 mm Adjustable support arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1500 mm Width: 2500 mm Height: 1350 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw Lhodpfx Aksywfkveqon - 4. Horizontal top 11 kw - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: used, total length: 1,150 mm, total width: 900 mm, total height: 1,800 mm, Colour: Green Empty weight: 400 kg - Spindle diameter [mm]: 25 - Table length [mm]: 1150 - Table width [mm]: 900 - Tiltable spindle: Manual - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Tool key included: Yes - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 1400 - Max. spindle speed [rpm]: 1200 - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 1150mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lhodpoy Nc Aajfx Akqsn Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: AB00017920, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, overall weight: 510 kg, height adjustment type: mechanical, milling spindle length: 180 mm, spindle stroke: 90 mm, working height: 923 mm, Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm Lsdpfswwkqhjx Akqohn - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Lsdopwdwbjpfx Akqshn Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Repair required: Bearings on one spindle which is already outside.

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Lhsdpozd Al Ijfx Akqsn Manual spindle height adjustment Spindle lock Adjustable cradle arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 2550 mm Width: 1000/1300 mm Height: 1300 mm

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Lhedpezk Nq Rsfx Akqen Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach