Used Brno for sale (80)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Nwjdpfx Aowmm U Ujf Iob

Condition: good (used), Year of construction: 2007, In good technical condition and fully operational. 4-axis machining center Year of manufacture: 2007 X-axis: 800 mm Y-axis: 520 mm Nwodew Tyt Njpfx Af Ijb Z-axis: 505 mm Spindle speed: 10,000 rpm Spindle taper: 7/24 taper No. 40 Spindle power: 15/18.5 kW (7.5/11) Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 48 m/min Rapid traverse Z-axis: 30 m/min Number of magazine stations: 24 Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool weight: 8 kg Machine footprint: 3,300 mm x 3,175 mm Machine weight: 7,500 kg Max. machine height: 2,950 mm

Condition: new, Year of construction: 2021, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Njdewx Nkcopfx Af Ijwb Machine weight 9500 KG

Condition: good (used), Year of construction: 2004, In good technical condition and fully operational. Bar feeder SPACESAVER 2210 – year of manufacture 2014, and lathe – year of manufacture 2004. Spindle bore 40 mm. Without chip conveyor. Tool holders – 3 x double internal diameter 25 mm, 5 x single internal diameter 25 mm, 1 x plate holder, 2 x external front holders 20 x 20 mm and 8 x external holders 20 x 20 mm. Functionality is limited to two-axis turning with an accuracy of up to 0.01 mm. Tool measurement – Renishaw probe – replaced in 2023. Nodpfx Aow N Nmwof Iewb

Condition: like new (used), Year of construction: 2021, General parameters: Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Intended use: Industrial edge processing with high precision Nwodpev D Rhuofx Af Isb Key features: Automation of basic functions for easy operation by one person Massive frame construction for high stability Electronically adjustable upper pressure path Two-band pressure belt for safe guidance of short parts IMA quick glue change system Program-controlled feed speed Multi-profile technology possible with automatic profile change Touch control via 21.5" industrial PC Technical parameters: Part thickness: 8–60 mm Minimum part length: 150 mm Minimum part width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Strip thickness: 0.3–3 mm Working speed: 20 m/min Machine equipment: Pre-milling unit with diamond tools Cutting unit with automatic tilting (15° inclination) Milling and copying units with automatic adjustment Edging system with PUR glue option Upper and lower spray system for cleaning and maintenance of the part Rounding and polishing units for final edge treatment ICOS open control system with touch screen

Condition: new, functionality: fully functional, MIDI MAX is the cheapest and most practical solution for dust removal, allowing you to have a large filtration area and a large collection bag. The MIDI MAX suction filter unit is a very reliable system for filtering dust and small sawdust where the quantity is not so large as to require the use of a separate container. Nwjdpfxjwfgnxj Af Iob

Condition: excellent (used), Year of construction: 2019, On behalf of our VIP client, we offer for sale an almost new Stream MDS machine from 2019. The machine is in excellent condition and has been serviced by us, so we know its full history. Technical information is available upon request. Nwedpfx Ajwyxkuof Ieb

Condition: good (used), Year of construction: 2008, In good technical condition and fully functional. Control: Fanuc 0i-MF Plus Year of manufacture: 2008 X-axis: 510 mm Y-axis: 360 mm Z-axis: 300 mm Spindle taper: BT-30 Number of tools in magazine: 20 Rapid traverse (X/Y/Z): Up to 48 m/min Motor power: 5.5 kW Machine dimensions (L x W x H): 2,700 x 1,600 x 2,310 mm Machine weight: 2,000 kg Equipment: Renishaw tool probe Chuck CNC-controlled 5th axis TSUDAKOMA TN-101 Nwsdpjw Eil Hofx Af Isb

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons. Nodpfewn Dbnjx Af Iewb

Condition: good (used), In good technical condition and fully functional. (Like new) Type: Crysta Plus M544 Manufacturer: Mitutoyo MCOSMOS manual version V4. Nedpfewi H S Esx Af Ijwb

Condition: new, Year of construction: 2023, In good technical condition, fully functional and testable. TVARcut LF 3015 GA Year of manufacture: 2023 (demonstration machine) Laser source power: 6 kW Max. material thickness: 27 mm Nedpfxsvtyp Ts Af Iowb Number of pallets: 2 pcs For sheet format: max. 3000 x 1500 mm Machine including voltage stabilizer and laser source cooling Total weight: 6600 kg Including training for your operator.

Condition: good (used), Year of construction: 2004, In good technical condition. GO 2004. CNC control based on an industrial PC. Measuring system: Tilting device for measuring the workpiece diameter with automatic corrections. Max. grinding length: 630 mm. Center height: 140 mm. Machine dimensions: Height 1600 mm, width 2300 mm, length 3750 mm, and machine weight approx. 3000 kg. Machine accessories Complete technical documentation for the machine DE Manuals for using the CNC control system CZ Nwsdpfx Afewfnvwe Iob

Condition: good (used), Year of construction: 2001, In good technical condition and fully functional. Year of manufacture: 2001 Maximum turning diameter: 310 mm Maximum turning length: 750 mm Lathe with FEDEK feeder. Machine weight: approx. 4,800 kg. Nedpfx Aowxv Dijf Iewb Dimensions: Length: 3400 mm, Width: 1800 mm, Height: 1900 mm

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. Nwodpfx Afeu Tq Hwo Isb X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Machine weight approx. 2600 kg.

Condition: good (used), Year of construction: 1995, In good technical condition and fully functional. A special machine for grinding involute splines on shafts and hubs. Built in 1995. SIEMENS Sinumerik control system. Maximum workpiece diameter: 1200 mm Maximum workpiece length: 1000 mm Maximum workpiece weight: 300 kg Spindle speed range: 100 – 1000 rpm Motor power: 7.5 kW Machine dimensions: length 2500 mm, width 1500 mm, height 1800 mm Weight approx. 4 tons. Nsdswcxd Tjpfx Af Iowb

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Nedpswc Sm Iofx Af Iswb Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Work spindle throat: 800 mm Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm

Condition: new, Year of construction: 2025, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet Nedpfx Asg Iwypof Ijwb C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: excellent (used), Year of construction: 1993, We offer a drum shot blasting machine with rubber belt – SCHLICK MB 2-4,1/7,5 Nwedpexfg Hlofx Af Ieb The machine is in fully operational condition. Year of manufacture – 1993 Total connected load – 13 kW Turbine power – 7.5 kW Bucket elevator power – 1.1 kW Filter fan power – 2.2 kW Belt power – 1.1 kW Door drive motor power – 0.12 kW Machine dimensions: Height – 3300 mm Width – 1450 mm Depth – 1800 mm Drum diameter – 600 mm Drum width – 850 mm

Year of construction: 2022, operating hours: 5 h, condition: excellent (used), functionality: fully functional, High-quality, barely used color sorter for coffee and similar bulk food products. Like-new condition. Ready for immediate use. Transportation can be arranged. Model CQ-32 Executive units 32 Nwsdpfx Aowxtlksf Ijb Production Capacity 250kg-300kg/hour Voltage 110V-220V/ 50-60HZ Power 800W Rejection rate ≥11:1 Sorting accuracy ≥99.99% Air supply pressure 0.5-0.8Mpa Air consumption ≤120L/min Weight 150kg Dimension 780*450*1370mm Warranty 1 yearModel CQ-32 Executive units 32 Production Capacity 250kg-300kg/hour Voltage 110V-220V/ 50-60HZ Power 800W Rejection rate ≥11:1 Sorting accuracy ≥99.99% Air supply pressure 0.5-0.8Mpa Air consumption ≤120L/min Weight 150kg Dimension 780*450*1370mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Inkjet printer Breva IJet 2L - top printer for personalized printing! Are you looking for a compact, easy-to-use and reliable solution for high-quality printing of various materials and objects? Breva IJet 2L is the answer to your needs. This top-of-the-line printer made in Italy allows you to: - Print a wide range of materials - plastic, wood, glass, metal, leather, textiles, paper and cardboard - Print texts, images, logos, barcodes and QR codes in top quality - Easy and intuitive operation thanks to sophisticated software - Low operating costs and maintenance-free operation - Flexible settings for various applications and industries Breva IJet 2L is used for printing sporting goods (golf, tennis), glasses, cosmetics, wine, coffee, wedding and event accessories and in many other areas. The printer is in perfect condition. The price includes 4 cartridges with different colors. Specifications Printing technology Flatbed inkjet technology Number of print heads 1 print head/integral cartridge Ink type UV, solvent and water-based inks Supported materials Plastics, wood, glass, metals (including aluminum), leather, leatherette, textiles, paper and cardboard Print resolution Options: Draft, Normal, High quality Building area size: 390 x 330 mm Maximum print area: 150 x 170 mm Maximum object height: Standard 50 mm; in some versions up to 80 mm, with the possibility of extension to 300 mm  Interface USB Supported OS: Microsoft® Windows 10 Power supply 110 - 240 V, 50/60 Hz; max. 120 W Operating temperature 18 - 32 °C Relative humidity 50 - 70% Printer dimensions (W x D x H) 474 x 522 x 260 mm Printer weight 9.7 kg Software Breva Control Center, Scribus Supported file formats PDF, PNG, JPG, BMP, EPS, TIF Nwedsv Sk Nbepfx Af Ieb

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 73965, Technical specifications: • Manufacturer: Rösler Oberflächentechnik GmbH (Germany) • Model: Centrifuge Z 1000 • Year of manufacture: 2016 • Motor power: 11.0 kW • Power supply: 400 V / 50 Hz • Maximum speed: 2,650 rpm • Maximum load: 65 kg • Maximum throughput: 1,000 l/h • Maximum liquid temperature: 40 °C • Maximum charge material temperature: 50 °C Nwsdpfxew Rc Ane Af Ieb • Drum inner diameter: 500 mm • Machine weight: 1,200 kg • Serial number: 73965 New cutting blades, seals, and centrifuge bearings. Fresh water tank 1x 2,000L and waste water tank 1x 2,000L and sludge trolley. Automatic process water refill.

Condition: like new (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 10044/0218, !!! PHOTOS AND MORE INFORMATION CAN BE FOUND IN THE PDF DOCUMENT!!! !!! (PDF visible only on the PC website) !!! REASON FOR SALE: Machine purchased in 2018, operated until 2020, then decommissioned and preserved as a backup machine following the purchase of another CNC machine. Nwedjwi Iu Ujpfx Af Iob DESCRIPTION: We offer a manual lathe Bezinger TLI 10 designed for producing wedding rings and specialized applications. The machine uses diamond tools for precision machining and achieving a perfect ring polish. It is capable of highly accurate machining of the inner, side, and outer surfaces of rings, including radii. Special separate fixtures enable individual operations without the need for adjustment or replacement of accessories. - A unique feature of the lathe is the vacuum chip extraction via a vacuum cleaner hose (vacuum cleaner not included in the offer). - In addition to fixtures for gold processing, the machine also includes additive fixtures for manufacturing platinum rings. - The sales package includes sets of mandrels for inner clamping of rods and tubes in 4 different widths. Each set contains 40 sizes of mandrels. - Also included is a set of tools, see PDF attachment for details. Type: TLI 10 drive: 0.55 KW with electric brake speed: 0-1400 rpm tension: 380V; 50/60Hz dimensions: 100 x 70 x 130 cm weight: 170 kg

Condition: used, functionality: fully functional, machine/vehicle number: 30841202, infeed width: 480 mm, MBO "Z2" Mobiles Folding Unit, Knife Folding Unit Usable for MBO folding machines as well as other brands. Nedpfx Afswptycj Ijwb Swivelable 180 degrees, thus folding with the knife is possible from above and below. Maximum feed width 48 cm, up to 150 cycles/min.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 35133, infeed width: 520 mm, GUK K 52/6-KTL-F4 folding machine with Gremser flat pile feeder. 6 pockets, then 2 knives and one additional pocket. Paper size: max. 52x86cm Speed: 30-150 m/min with belt delivery and compressor. In working order, ready for testing. Nwjdjwl Nifspfx Af Isb

Condition: repair required (used), Year of construction: 1992, functionality: limited functionality, Year of manufacture 1992 Counter reading: 83,383,418 Five colors plus coating unit Prints on tower 2-5 cmyk. Tower 1 is not suitable for printing because the cylinder is defective. Paper format 72x104cm B/W Perfector 1/2 Njdjtp N Ekepfx Af Iowb short roller coating unit. Unimatic C3 control panel Spiess feeder Weko powder device IR dryer IST D-IRK-4-WA-mi. Machine is powered.